Used Ceiling Lights for sale (18,652)

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Light color neutral white Luminaire luminous flux 4000 lm Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Lamp height: 72 mm Fedpfxsvbu Awo Ap Degh Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Ceiling panels from Waldner Fedpfx Apszkadzs Djgh Year of manufacture: 2010 | Condition: used, ready for operation | Functionality: fully functional Price: €4,990.00 for both units plus VAT and shipping • Two high-quality ceiling panels from Waldner are for sale. • There are two compressed air connections. Instead of a lower water connection, a connection for demineralized water is provided, allowing the water to be drawn upwards into the channel. • A high-voltage connection and a fuse box with an RCD (residual current device) and lighting are available. • Gas fittings are not included in the scope of delivery.

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fjdpfx Aoz Iwpgsp Degh Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: Fodpfx Apjzpy Ido Dsgh - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive Fgodpfx Apjz Nxk Ne Doh

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Fgedpfez Hwvdex Ap Deh Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. The best alternative to extractor hoods GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Technical Specifications Exhaust Air Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Financing through our bank is also possible. komplett-konzept.leasingo.de Fgsdpfxst Hglke Ap Dsh Further items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, machine/vehicle number: 516301X00339, Year of construction: 2020, operating hours: 5,917 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,150 mm Load capacity: 2,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex free-lift mast Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery voltage in idle state: 85.4 V Mast type: Duplex free-lift mast Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Weight: 4,700 kg Fjdpfez Iwqksx Ap Djgh Service valid until: 05/2027 Safety inspection valid until: 05/2027 Operating hours: 5,917 h EQUIPMENT Former Still full-service unit 3rd and 4th valve Fork positioner Hydraulically adjustable forks Side shifter Semi-cabin Windshield wiper Comfort seat LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear If the mast is too high, it can be dismantled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged if collection is not made on time. Outstanding storage fees must be paid in full before collection. Lot number: 159

Condition: used, machine/vehicle number: P21120H01993, Year of construction: 2017, operating hours: 8,479 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 8,255 mm Load capacity: 1,600 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,250 x 3,430 mm Own weight: 4,100 kg Year of battery manufacture: 03/2018 Battery voltage: 48 V Battery capacity: 775 Ah Rest voltage: 50.4 V Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 Operating hours: 8,479 h EQUIPMENT Former Linde full-service unit 3rd auxiliary valve 4th auxiliary valve Fgodpfx Apsz Iwr Uo Deh Integrated scale Integrated lifting height indicator Overhead guard LED work light, front LED work light, rear Safety light, front Rear-view camera Side shifter If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 205

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,649 h, functionality: fully functional, machine/vehicle number: 101161, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 920 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 14,000 rpm, A new spindle was installed one year ago! TECHNICAL DETAILS Travel in X-axis: 1,020 mm Travel in Y-axis: 620 mm Travel in Z-axis: 920 mm Swivel range of B-axis: +30° to -120° Spindle speed range: 1–14,000 rpm Tool holder: SK 40 Tool magazine capacity: 40 Clamping surface of rotary table: 1,200 × 610 mm Diameter of rotary table: 500 mm MACHINE DETAILS CNC control: Heidenhain iTNC 530 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 75 kVA Rated current: 100 A Main fuse: 120 A Machine weight: 8,740 kg Operating hours (according to counter) Spindle running time: 10,649 h Program running time: 11,159 h Machine operating hours: 24,317 h Control operating hours: 26,901 h EQUIPMENT Fixed rotary table NC rotary table WALTER B-axis swivel head with torque drive Vertical tool changer 3D measuring probe Heidenhain Electronic handwheel Fodpjz Hwutsfx Ap Djgh Fixed full protective enclosure with interior lighting Internal cooling system Coolant system Oil mist extraction Chip conveyor Operating manual

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm MACHINE DETAILS Mast type: Duplex mast Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,300 x 2,420 mm Own weight: 4,896 kg UVV certification valid until: 05/2027 Next service due in: 516 hours Starter battery: new in 05/2027 Operating hours: 3,483 hours EQUIPMENT Former Jungheinrich full-service unit Fgjdjz Iwrhepfx Ap Doh Side shifter Free-lift mast without center hydraulic cylinder 3rd valve Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system All dimensions are rounded values. No warranty is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 172

Condition: used, machine/vehicle number: H2X386E52851, Year of construction: 2014, operating hours: 4,974 h, load capacity: 1,600 kg, lifting height: 4,625 mm, mast type: triplex, overall weight: 3,320 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm MACHINE DETAILS Mast: Triplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Rest voltage: 48.51 V Service valid until: 10/2027 Safety inspection valid until: 10/2027 Machine type: Electric forklift Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,320 kg Operating hours: 4,974 h EQUIPMENT Former Linde full-service unit Semi-cab with windshield and wiper Roof window White, non-marking tires LED work light, front LED work light, rear Safety light, rear Comfort seat with lumbar support Charger Hydraulic function: 3rd valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Fgsdpfx Aoz Ixcnsp Djh Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if collection is not made within the specified period. Outstanding storage fees must be paid in full before collection. Lot number: 110

Condition: used, mileage: 1,30,000 km, power: 120 kW (163.15 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2027, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,267 mm, total width: 2,020 mm, total height: 2,332 mm, loading space length: 2,630 mm, loading space height: 1,620 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Well-maintained Mercedes Benz Sprinter 316 (907) compact panel van, 2.1 L - 120 kW CDI CAT engine, with good features, ideal for trades and businesses. Permissible total weight: 3.5 t Trailer hitch preparation (electrical wiring present and connection socket with connecting cable included) Air conditioning with pollen filter Comfort suspension seat on the driver's side with fold-out armrest, adjustable in four ways: Driver's weight, seat height, seat inclination, backrest 3 seats (double passenger seat) Driver assistance systems: - Reversing camera (very good image) - Driver fatigue detection - Hill start assist - Brake assist (HBA) - ABS, ASR, ESP - Automatic headlight control - Automatic windshield wiper control MBUX infotainment system with touchscreen - Navigation with TMC - AppConnect with Android Auto and Apple CarPlay - DAB/FM radio - USB-C media, music streaming via Bluetooth - Mobile phone preparation with Bluetooth and hands-free system - Mercedes Benz emergency call system - Voice control for radio system, navigation, and phone Multifunction steering wheel On-board computer/multifunction display Maintenance interval display Assyst Comfort: - Electric windows (both sides) - Electrically adjustable exterior mirrors (both sides) - Central locking with remote control - Keyless start system Headlight unit with daytime running lights Fog lights 6-speed manual transmission Wheelbase 3250 mm Rear wing doors without glazing, opening angle 180 degrees Sliding door to the cargo area on the right High cargo area partition without windows Storage compartments in the headliner Seat cover fabric Steering wheel/steering column adjustable Heat protection glazing Jack Cargo area equipment: Cargo area partition (steel) without windows. Robust, plastic-coated wooden floor (manufacturer: Würth). Load securing through special fastening rails (on the side walls, in the floor, and on the ceiling) and eyelets. LED interior lighting. Rear step. Rear grab handle on the right. Cargo area dimensions: Cargo area length at the bottom approx. 2,630 mm Cargo area length in the middle/at the top approx. 2,530 mm (due to the angle of the partition) Cargo area height approx. 1,620 mm - 1640 mm (measured under the cross member) Maintenance history according to leasing documents: 12/2022 / 60,285 km Inspection with engine oil change + brake fluid Fodsz N S Rvjpfx Ap Degh 07/2024 / 101,141 km Inspection with engine oil change + air filter Service A is currently due Mounted tires: Winter tires Continental 235/65 R 16 on steel rims with approx. 7 mm tread depth at the front and approx. 6 mm at the rear Additional set of wheels in the cargo area: Summer tires Continental 235/65 R 16 on steel rims with approx. 3 / 3 / 4 / 4 mm tread depth. Despite careful processing, input and data transmission errors may occur in the vehicle description, including images. Errors and prior sale are reserved.

Condition: used, machine/vehicle number: FN572336, Year of construction: 2018, operating hours: 10,006 h, load capacity: 1,600 kg, lifting height: 3,700 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,700 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,360 mm Own weight: 3,300 kg Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS Battery voltage in idle state: 51.6 V Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 10,006 h EQUIPMENT Formerly a Jungheinrich full-service machine Clear-view mast without central hydraulic cylinder Load backrest Full cabin with heater and windshield wiper LED work light at the front LED work light at the rear Fedpfx Asz Iwm Sep Degh Comfort seat Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 111

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Fgodpfsz Hxb Uex Ap Deh Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Fgjdpfez Iwi Hex Ap Djh Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: used, mileage: 1,09,352 km, power: 140 kW (190.35 HP), first registration: 04/2020, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Vehicle number (for inquiries): 144 MERCEDES-BENZ Sprinter 319 CDI MAXI 3.0 V6 AUTOMATIC 7G-TRONIC AIR CONDITIONING LED Paint Code: * 5361 Paint color Enzian Blue Interior Equipment: * VF7 Fabric Maturin black Features: * BA3 Active Brake Assist * BH1 Hold Function * BH6 Control Code Hydraulic Unit Variant 5 * BK2 Control Code Wheel Brake Configuration 2 * C6L Multifunction Steering Wheel * CB8 Stabilization Level II * CL1 Steering Wheel Adjustable for Tilt and Height * CL3 Leather Steering Wheel * CN2 Grill Frame in Vehicle Color * CT1 Vibration Damper * CW2 Vehicle Lowering Omitted * D03 High Roof * D51 Full Partition with Window * E07 Hill Start Assist * E1D Digital Radio (DAB) * E3M MBUX Multimedia System with 7-inch Touchscreen * ED4 AGM Battery 12 V 92 Ah * ES0 Jump Start Terminal * ES5 Instrument Panel Charging Package * ET4 Active Distance Assist Distronic * EW6 Preparation for Remote Services Plus * EY5 Mercedes-Benz Emergency Call System * EY6 Breakdown Management * F1K Coat Hook in Cabin * F68 Heated and Electrically Adjustable Exterior Mirrors * FF4 Storage Compartment Above Roof Lining * FF5 Shelf Above Windshield * FG8 Front Cupholders * FJ1 Hinged Lid for Storage Compartment * FJ4 Storage Compartment Below Dashboard * FJ5 Hinged Lids for Left and Right Storage Compartments * FK3 Chrome Grille * FKA Panel Van * FR8 Reversing Camera * FY7 Multi-Button Remote Control * G42 7G-Tronic Plus * H12 Auxiliary Hot Water Heater * H16 Heated Driver’s Seat * H21 Heat-Insulating All-Around Glazing with Band Filter on Windshield * HH9 Semi-Automatic Air Conditioning Tempmatic * HI1 Climate Zone 1 (cold/comfort) * IC1 Model Series C907/C910 Sprinter * IE0 Model Series C907 VS30 RWD * IG4 Standard * IG5 Basic * IH6 Head Unit ECE/ROW * IK0 Complete Vehicle * IL1 Domestic (Germany) * IR6 Wheelbase 4325 mm, Rear Overhang 1615 mm * IT4 3.5-ton Variant * J10 Speedometer in km/h * J58 Seat Belt Warning for Driver’s Seat * J65 Outside Temperature Display * JA8 Crosswind Assist * JF1 Rain Sensor * JH3 Communication Module (LTE) for Digital Services * JI7 Start-Up Route Service Interval 60,000 km * JK5 Instrument Cluster with Color Display * KB7 Main Fuel Tank 93 Liters * KP6 Emissions Reduction SCR Generation 3 * L13 Fog Lights with Cornering Function * L22 Rear Lights in Partial LED Technology * L65 Ceiling Light Load/Passenger Compartment with Door Contact * L94 Parking Light Omitted * LA2 Automatic Driving Lights * LB1 Side Marker Lights * LB5 3rd Brake Light * LC4 Comfort Roof Control Unit * LE1 Adaptive Brake Light * LG7 LED High Performance Headlights * LX5 Europe * M40 Alternator 14V/200A * MG5 Engine OM642 DE 30 LA 140 kW (190 hp) * MJ8 ECO Start-Stop Function * MP6 Engine Variant Euro VI * MQ0 OBD (On-Board Diagnostics) Stage D * P47 Front Mud Flaps * Q11 Longitudinal Frame Reinforcement * Q67 Rear Tow Eye * RF1 Tyre Brand Continental (10) * RH2 Tyres 235/65 R16 C * RL5 Alloy Wheels 6.5J x 16 * S22 Armrest for Driver’s Seat, ISO-fix (Child Seat Mounting System) Fgodpfx Apevauyas Deh * S23 Twin Passenger Seat * S28 Side Storage Box Under Left Front Seat * S87 Low Driver’s Seat Base * SA5 Driver Airbag * SB3 Driver’s Suspension Seat * SK2 Seat Occupancy Detection for Driver’s Seat * T16 Sch... (truncated)

Condition: used, machine/vehicle number: 91671500, Year of construction: 2023, operating hours: 1,435 h, load capacity: 7,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Tires: White, non-marking tires Lighting: StVZO-compliant lighting with turn signals for road approval Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Fjdpjz Iwt Sofx Ap Djgh Weight: 1,500 kg Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 1,435 h EQUIPMENT Battery charger Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 357

Condition: used, machine/vehicle number: H2X386J03885, Year of construction: 2018, operating hours: 7,399 h, load capacity: 2,000 kg, lifting height: 4,625 mm, fuel type: electric, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Load capacity: 2,000 kg Fork length: 1,200 mm MACHINE DETAILS Mast design: Triple mast Drive type: Electric Battery voltage: 48 V Battery capacity: 775 Ah Battery type: 5 PzS Battery year of manufacture: 2018 Measured idle voltage: 50.4 V Battery equipment: Aqua + EUW Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,100 mm Own weight: 4,000 kg Operating hours according to display: 7,399 h EQUIPMENT Former Linde full-service unit 3rd additional valve: with side shifter 4th additional valve: present, available for fork positioner Free lift Side shifter Full cab Cab heater Windshield wiper Comfort seat LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety Light, front Safety Light, rear Note: Occasional error message displayed All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the stipulated time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Fgjdpfx Apoz Iwq Do Djh Lot number: 161

Condition: used, machine/vehicle number: H2X386V12010, Year of construction: 2019, operating hours: 14,594 h, load capacity: 1,600 kg, lifting height: 3,145 mm, mast type: duplex, overall weight: 3,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,145 mm Load capacity: 1,600 kg MACHINE DETAILS Mast design: Duplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery idle voltage: 51.13 V Service valid until: 10/2027 UVV (Occupational Safety) valid until: 10/2027 Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,200 kg Operating hours: 14,594 h EQUIPMENT Former Linde full-service unit EVO facelift model Fgsdpfx Apoz Ixinj Dsh Color display Tilt angle display Side shifter Semi-cab Windshield with windshield wiper Roof window LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating High-quality charger, year of manufacture 2026 Additional hydraulics: 3rd valve Additional hydraulics: 4th additional valve for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 188

Condition: used, mileage: 1,14,000 km, power: 110 kW (149.56 HP), first registration: 02/2020, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Beautiful and well-maintained VW T6 L2 long wheelbase panel van, 4Motion / all-wheel drive, with excellent features, ideal for trades and businesses. Workshop/shelf system from Sortimo and electrical installations (details below). All-wheel drive (4Motion, 4M, 4x4, 4WD) Underride protection for engine/transmission made of plastic GVWR 3.0 t Tow hitch with 2.5 t towing capacity Reinforced suspension and damping LED headlights for low beam and high beam retrofitted Auxiliary heater, programmable Heated driver's seat Climatic air conditioning with pollen filter Comfort driver's seat with fold-out armrests, adjustable in various ways: seat height, backrest, lumbar support Single passenger seat with adjustable backrest Seat covers in Simora fabric Driver assistance systems: - Rearview camera - Cruise control - Driver fatigue detection - Hill-start assist - Trailer stabilization - Tire pressure monitoring - Brake assist (HBA) - Multi-collision brake - ABS, ASR, ESP, EDS Audio-navigation system Discover Media (touchscreen color display) - Radio, CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - Mobile online services Car-Net - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multi-function display Plus / on-board computer Driver and passenger airbags Electrical Package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Fog lights with cornering function 2nd battery with separating relay Wheelbase 3400 mm Sliding door to the cargo area on the right with tinted glass Rear door with tinted glass, heated, with windshield wiper Commercial vehicle registration N1 6-speed manual transmission Adjustable steering wheel Non-smoker package Heat-reflective glass Cargo area equipment: Workshop installation by Sortimo (similar to Aluca, Bott, Würth). Shelving units on both sides with shelf compartments, storage compartments, small parts containers, drawers (14x), 5 small parts cases made of aluminum. Fold-out vise. Cargo area partition with window. Robust wooden floor. Load securing through eyelets and fastening rails. Walls (with plastic panels) and ceiling lined. LED lighting. Ventilation. Electrical installations: 230V / 1kVA voltage converter/inverter Cotec, supplied via additional battery. 4 x 230V sockets in the cargo area, 2 x 230V sockets in the driver's cab, with insulation monitor and fuse. Cargo area dimensions: - Length at the bottom: approx. 282 cm - Length in the middle: approx. 271 cm - Length at the top: approx. 261 cm - Height: approx. 134 cm Mounted tires: Summer tires 205/65 R 16 with approx. 3 mm tread depth front and rear Additional tires: Winter tires 215/65 R 16 with approx. 8/8/8/8 mm tread depth Service history according to leasing documents: 09.2021 / 27,450 km: Long-life service 01.2023 / 52,183 km: Long-life service Fgodpfxjz N S Rpj Ap Djh 06.2024 / 77,601 km: Long-life service + Service 1 06.2025 / 97,162 km: Long-life service Service is currently due. Despite careful processing, input and data transmission errors may occur in the vehicle description, including the images. Errors and prior sale are reserved. Automobile Fischer Munich

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Fgsdpfx Apoz Iwnps Doh Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 850079, Year of construction: 2006, operating hours: 11,220 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 4,500 mm Free lift: 1,410 mm Fsdpoz D Uxdsfx Ap Djgh Fork length: 1,220 mm Minimum fork width: 240 mm Maximum fork width: 1,240 mm Number of wheels: 4 MACHINE DETAILS Mast type: Triplex Fuel type: Diesel Engine manufacturer: Isuzu Operating hours: 11,220 h Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,260 x 2,120 mm Unladen weight: 4,710 kg EQUIPMENT Side shift Free lift Work lights CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516221V00034, Year of construction: 2019, operating hours: 974 h, load capacity: 1,600 kg, lifting height: 6,820 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 6,820 mm Free lift: 2,450 mm Fork length: 1,150 mm Maximum fork width: 935 mm Minimum fork width: 200 mm Number of wheels: 3 MACHINE DETAILS Mast type: Triplex Drive: Electric Battery type: 5 PZS 625 Battery year of manufacture: 2018 Battery capacity: 625 Ah Battery voltage: 48 V Battery tray length: 830 mm Battery tray width: 630 mm Battery tray height: 630 mm Operating hours: 974 h Fsdpfoz Eacqex Ap Dogh Dimensions & Weight Dimensions (L x W x H): 1,900 x 1,200 x 2,860 mm Unladen weight: 3,419 kg EQUIPMENT Side shift Non-marking tires Full cabin Heater Work lights CE marking Documentation

Condition: used, mileage: 1,55,000 km, power: 93 kW (126.44 HP), first registration: 11/2012, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Buy online. Finance digitally. Get it delivered nationwide. ----Chat with us now via WhatsApp: Fsdpfx Aszurb Hop Dsgh Get in touch quickly and easily with our sales consultant. Internal ID number: [3501]---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery ---- High roof Trailer hitch = 3,500 kg Special equipment: Airbag, passenger side, Audio system: radio with CD player, Exterior mirrors, electrically adjustable and heated, Roof storage compartment with DIN compartment, Parking assistance system with sensors, Exterior load compartment light above the rear doors, Mud flaps front and rear, Seat cover/upholstery: synthetic leather, Interior trim in the load/cargo area: hard fiber, high Additional equipment: Airbag, driver side, Design: S-series, Ceiling light in the cargo area, Anti-slip regulation (ASR), Rear axle suspension: leaf spring, Front axle suspension: transverse leaf spring, Wing doors at the rear, Windshield and side windows tinted, Generator 120 A, Body/structure: high-roof van, standard, Fuel tank: 70 liters, Cargo area partition, Headlight range adjustment, Engine 2.3 liters - 93 kW diesel, Radio preparation with speakers, Wheelbase 3000 mm, Tire repair kit, Low emissions according to emission standard Euro 5, Headlights H4, Sliding door cargo/passenger compartment, right, Seats in the cab: double passenger seat with headrests, Permissible gross weight 3.5 t ---- Contact: Phone: WhatsApp: Email: ---- All information on the internet is non-binding and serves only for the general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.