Used Centerless Grinding for sale (4,077)

Condition: ready for operation (used), Grinding diameter: 100mm, max. workpiece length through-feed grinding/penetration grinding: 250mm/200mm, grinding wheel diameter: 500mm/600mm, grinding wheel bore: 304.8mm/254mm, regulating wheel diameter: 300mm, regulating wheel bore: 127mm/152mm, grinding and regulating wheel width: 200mm. On-site inspection is possible. Ksdpewk Nl Dofx Aabsnc

Condition: used, Manufacturer: CINCINNATI Kjdpfxowrpykj Aabsnc

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, grinding wheel width: 220 mm, grinding wheel diameter: 500 mm, controller manufacturer: Siemens, controller model: Sinumerik, TECHNICAL DETAILS Grinding Grinding wheel diameter: 500 mm Grinding wheel width: max. 220 mm Knjdpfxowymdve Aabjc Control Control system: Siemens Sinumerik MACHINE DETAILS Electrical data Total power requirement: 35 kW

Condition: good (used), Centerless grinding machine Kjdpew Rcu Rofx Aabjnc Good condition, fully operational, can be inspected and tested on site. Shipping abroad is also possible. Inspection: As a general note, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask questions before buying to avoid any ambiguities. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Shipping via freight forwarding.

Condition: used, Year of construction: 1978, grinding diameter max. 100 mm regulating wheel width 200 mm max. width of grinding wheel 200 mm grinding diameter 100 mm grinding length 250 mm feed in mm working area mm speed m/min Bar length mm total power requirement 25 kW weight of the machine ca. 4.500 t dimensions of the machine ca. m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _____ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 – 140/230 rpm Regulating wheel tilt plus/minus +3 / –5 ° Stroke of Dressing Device 200 mm Grinding wheel drive, approx. 18,5 kW Total electrical load approx.. 25 kW - 380 V - 50 Hz Weight approx.. 4.500 kg Accessories/Special Features: * Machine is suitable for a Plunge-In Grinding Process with a manual workpiece Injection device and a pneumatic driven workpiece lift-off device after grinding Process. The final removal of the finished parts is by hand. * Actually mounted a workpiece rest for medium sized workpieces, (maybe 50 mm) * The Regulating wheel slide/workpiece rest carriage can be inclinate by 3 to 5 degrees to compensate cylindrical errors. * The infeed adjustment of workpiece saddle is controlled by a hydraulic plunge-in device with a cam device for quick-feed forward and backwards, also there is a fine infeed actuated by a step motor controlled by MARPOSS – Unit. * The grinding spindle unit is fixed and accommodates a complex hydraulic dressing device with template and the slide can be swivelled for profiling plane shoulders, stepmotor for the infeed of diamond tool compensation, also there is mounted a hi pressure coolant nozzle to cool down the diamond tool and to rinse the grinding wheel. * Hydraulic driven Copy Dressing device mounted above the regulating wheel. * The regulating wheel speed is steplessly adjustable, higher speed during dressing poc. * The control panel contains all machine functions like Numbers of dressing cycles, number of workpieces, adjustable spark-out time, speed range, manual or automatic process, etc. * some sep. Flanges and grinding and regulating wheels, tool for changing the flanges,separate Hydraulic and sep. Switch cabinet, central lubrication, MARPOSS Unit, * ! Actually there is no Coolant device available ! Kjdpet Hwtrjfx Aabsnc Condition : Good to very good. Machine can be inspected under power. Ideal for small batch production. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 12.02-37-31, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, grinding diameter: 125 mm, grinding length: 200 mm, type of input current: three-phase, overall weight: 5,000 kg, workpiece diameter (max.): 125 mm, nominal power: 28 kW (38.07 HP), The machine was used exclusively for grinding piston rods with a diameter of 10 mm. Kedow E D Euepfx Aabonc

Year of construction: 2013, condition: ready for operation (used), Grinding method: through-feed grinding/infeed grinding, max. workpiece diameter: 100mm, max. grinding length: 250mm, grinding wheel outer diameter: 400mm, inner diameter: 203.2mm, max. grinding wheel width: 250mm, circumferential speed: 50m/s, power: 11kW. Regulating wheel: outer diameter: 225mm, inner diameter: 127mm, width: 250mm, inclination angle: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Includes Kraft & Bauer fire extinguishing system, Knoll fine filter, and Streuli lifting station. Documentation available. An on-site inspection is possible. Kedsw Nq Rkspfx Aabenc

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, grinding wheel width: 150 mm, grinding wheel diameter: 305 mm, year of last overhaul: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1-40 mm, machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles with hydraulic slide bearings via three-point bearings, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via AC motor, new German-made electrical system with Siemens components, Siemens S7 control system Knjdpswi H Uaefx Aabjc

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, grinding wheel width: 230 mm, grinding wheel diameter: 500 mm, controller manufacturer: Siemens, TECHNICAL DETAILS Grinding Grinding wheel diameter: 500 mm Grinding wheel width: max. 230 mm Axes X-axis: Plunge slide Y-axis: Dressing quill "S" for rollers V2-axis: Dressing quill "R" W2-axis: Dressing slide "R" U1-axis: Support "S" U2-axis: Support "R" Control Control: Siemens Knsdpfx Ajwyl Uyjabjc MACHINE DETAILS Electrical Data Total power requirement: 35 kW

Condition: not inspected (used), Year of construction: 1992, functionality: unexamined, machine/vehicle number: 447, grinding wheel diameter: 250 mm, No minimum price - guaranteed sale to the highest bidder! Bidding commits you to timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Grinding wheel diameter: 250 mm Control: SINUMERIK 805 Grinding speed: 63 m/s Knsdpfxowvi E Ue Aabec Axes X-axis: plunge slide Y-axis: dressing quill S Z-axis: dressing slide S C-axis: support U-axis: support R W-axis: dressing slide R CNC controlled: X / Y / Z / C MACHINE DETAILS Overall height: 2,200 mm Overall width: 2,500 mm Overall length: 2,800 mm Overall weight: 4,500 kg Operating voltage: 380 VAC 50 Hz Rated current: 100 A Connected load: 38 kW Transport can be carried out easily by a standard truck.

Condition: used, Year of construction: 1973, grinding diameter max. 30 mm regulating wheel width 12 mm max. width of grinding wheel mm Knodpfx Aaet Hwwwobsc total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: reconditioned (used), Year of construction: 1980, operating hours: 11,200 h, functionality: fully functional, workpiece weight (max.): 100 kg, total width: 1,400 mm, total length: 2,100 mm, total height: 950 mm, grinding length: 80 mm, overall weight: 1,545 kg, rotational speed (max.): 1,000 rpm, rotational speed (min.): 640 rpm, grinding diameter: 50 mm, type of input current: three-phase, workpiece diameter (max.): 235 mm, feed length X-axis: 12 mm, grinding wheel diameter: 250 mm, input voltage: 400 V, control cabinet height: 1,400 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, grinding wheel bore: 67 mm, grinding wheel width: 32 mm, grinding width: 32 mm, nominal power: 7 kW (9.52 HP), stroke length: 345 mm, working range: 345 mm, year of last overhaul: 2025, For sale: Industrial internal cylindrical grinding machine JUNG C8, suitable for precision grinding of internal cylindrical surfaces. This is a proven German machine with robust construction and reliable performance. Key technical specifications: Type: Internal cylindrical grinding machine Model: JUNG C8 I am selling a well-maintained Jung C8 grinding machine due to loss of business. The machine has been thoroughly refurbished: In 2025, all electrical wires in the control cabinet were replaced, ensuring greater reliability and safety during operation. A complete set of new bearings is also included. Knsdswyu H Sopfx Aabsc Machine dimensions (L×W×H): 2100 × 1400 × 950 mm The machine has been cleaned, mechanically inspected, and is ready for use. Advantages: *Proven German quality (manufacturer JUNG) *Ideal for precision grinding of internal bores, bushings, seats, etc. *Compact design and robust build *Highly suitable for toolmaking workshops and small series production Price is negotiable.

Condition: good (used), Grinding wheel dimensions (OD x ID x width): Ø406 x Ø229 x 254 mm Min./max. diameter to be ground: 125 mm Grinding wheel width: 254 mm Max. plunge grinding length: 254 mm Regulating wheel dimensions (OD x ID x width): Ø280 x Ø165 x 254 mm Kedpfx Aasw R Rrqobonc Grinding wheel motor power: 30 HP Total power: 34 HP Approx. weight: 5,500 kg Dimensions: 2,600 mm length x 1,200 mm width x 1,200 mm height

Condition: used, Ghiringhelli Centerless Grinder, Model 65, Made In Italy, Kjdpfew Inggex Aabonc

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: 009005005, TECHNICAL DETAILS working range: 2 - 200 mm bar length: 500 mm dressing speed: 500 rpm control: Siemens 840 C control wheel width: 400 mm control wheel bore: 152 mm Knjdpfxslmm Evs Aabec regulating wheel diameter: 350 mm control wheel speed: 10-150 rpm Control wheel drive: 11,3 kW grinding wheel width: max. 400 mm grinding wheel diameter: max. 660 mm grinding wheel bore diameter: 304.8 mm grinding wheel speed: 63 m/s Grinding wheel drive: 45 kW MACHINE DETAILS weight: 10 t Connection: 400 V / 50 Hz / 3 phases Rated power: 115 kW

Condition: refurbished (used), machine/vehicle number: 2257, Manufacturing origin France Voltage 380/50/3 Netweight 3000 kg Custom position 8460.29 20 Dimensions 2400x1550 mm Knjdpfjfnm Iijx Aabjc TECHNICAL DATA Diameter capacity 80 mm Type 2HA : 120 mm Maximum infeed grinding length 200 mm Maximum throughfeed grinding length (with normal-type guides) 300 mm Grinding wheel : -diameter 400 mm -maximum width 200 mm -bore 203.2 mm Driving wheel : -diameter 254 mm -width 200 mm -bore 127 mm Main drive motor 11-22 kW Driving wheel motor 1,1 kW Driving wheel speed 10 – 200 U/Min Standard accessories : 1 flange with grinding wheel 1 flange with driving wheel 1 workpiece support bridge 1 set of shims for workpiece support -Hydraulic dressing and trueing device for grinding and driving wheels -Variable speed drive of driving wheel -Electrical equipment for 3x380 v, 50 Hz -Main drive motor, 11 kW -Ammeter for main drive motor Starter keys and operating manual errors and omissions excepted data given without obligation.

Condition: refurbished (used), Year of construction: 1986, The machine was mechanically overhauled in 2006 and electrically re-equipped (control cabinet, Siemens 840D control, motors, measuring systems, cables) Grinding wheel Ø 600 x 250 mm Regulating wheel: Ø350 x 250mm Grinding spindle bearing on the fly Regulating wheel bearing double Regulating wheel dresser with copying device Regulating wheel unit with manual feed Kjdpfx Aaovldt Hebonc Plunging and through-feed grinding possible

Year of construction: 2000, condition: used, grinding diameter max. 600 mm regulating wheel width 600 mm max. width of grinding wheel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Kjdpfx Aasfp U Ugsbenc Spindle set consisting of spindle shafts for mounting of grinding and also regulating wheels suitable for a LIDKOEPING CL 660. A number of sets are available.

Condition: reconditioned (used), Year of construction: 2025, Grinding wheel dimensions (OD x ID x width): Ø508 x Ø304.8 x 305 mm Min/max diameter to be ground: 150 mm Grinding wheel width: 305 mm Maximum plunge grinding length: 305 mm Regulating wheel dimensions (OD x ID x width): Ø330 x Ø203 x 305 mm Regulating wheel motor power: 4 kW Ksdpfxsw R Rq He Aabenc Grinding wheel spindle motor power: 37 kW Hydraulic motor power: 2.2 kW Total power: 45 kW Length: 3,500 mm Width: 2,500 mm Height: 1,100 mm Weight: 6,500 kg

Condition: used, Year of construction: 2002, functionality: fully functional, grinding wheel width: 125 mm, grinding wheel diameter: 400 mm, total height: 2,250 mm, total width: 2,150 mm, total length: 3,450 mm, grinding diameter: 30 mm, grinding length: 120 mm, type of input current: AC, rotational speed (max.): 3,000 rpm, rotational speed (min.): 2,000 rpm, workpiece diameter (max.): 30 mm, input voltage: 400 V, disc diameter: 400 mm, grinding width: 125 mm, Grinding range Workpiece diameter min. 0.5 mm Workpiece diameter max. 30 mm Max. workpiece length (plunge grinding) 120 mm Grinding wheel: 400 x 125 x 203.2 mm Grinding spindle with maintenance-free hybrid rolling bearings, 63 m/s (max. 120 m/s) Drive power 11 / 15 kW Can be used as an angular plunge grinding machine (15° / 6°) Regulating wheel lowering up to 20 mm possible (optional) Technologies (possible): - Plunge grinding - Through-feed grinding - Angular plunge grinding - Oscillation grinding Knodpfx Aewtqvcsaboc - Plunge grinding in mass production - Multiple-operation grinding in one cycle

Year of construction: 1994, condition: good (used), functionality: fully functional, machine/vehicle number: 073000312, TECHNICAL DETAILS grinding diameter: max. 200 mm regulating wheel width: 400 mm grinding wheel width: max. 400 mm Control name: Siemens 840 C Profile depth: max. 15 mm Gr. workpiece length plunge grinding: 500 mm drive grinding spindle: 50 kW regulating wheel speed: 10 - 150 1/min Ksdpfxjlmmy Uj Aabjnc regulating wheel drive: 3 kW regulating wheel inclination: +2° / -6 ° peripheral speed: 31,5 / 63 m/sec MACHINE DETAILS machine weight: approx.10 t operating voltage: 400 V / 3 phases / 50 Hz rated current: 160 A

Condition: good (used), Ghiringhelli centerless cylindrical grinding machine Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Ksdjvg Ev Sepfx Aabonc Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), SPECIFICHE TECNICHE: Dimensioni mola operatrice 400x200 mm Dimensioni mola conduttrice 280x200 mm Potenza mola operatrice 14,7 Kw Potenza mola conduttrice 0,74 Kw Kedpowf Hd Hefx Aabenc TECHNICAL SPECIFICATIONS: Operating wheel dimensions 400x200 mm Driver wheel dimensions 280x200 mm Operating wheel power 14.7 Kw Driver wheel power 0.74 Kw

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Knodpetmqi Djfx Aaboc The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 2011, functionality: fully functional, grinding wheel width: 400 mm, grinding wheel diameter: 610 mm, grinding diameter: 100 mm, grinding length: 400 mm, type of input current: AC, rotational speed (max.): 2,000 rpm, feed length X-axis: 150 mm, Technical description of the machine: Grinding range Workpiece diameter minimum 1.5 mm Workpiece diameter maximum 100.0 mm Grinding wheel dimensions Diameter maximum 610 mm Width maximum 400 mm Bore 304.8 mm Regulating wheel Diameter maximum 350 mm Width maximum 400 mm Bore 127/152 mm Grinding wheel drive Peripheral speed constant Peripheral speed 63 m/s Peripheral speed 120 m/s (optional CBC) Knsdpfjwq R I Hjx Aabsc Drive power 37/60 kW Regulating wheel drive Speed range continuously variable 5...450 min-1 Dressing speed 450 min-1 Drive power 5.7 kW Dimensions Installation area (foundation) 2300x1100 mm Total area (including control cabinet) 5700x3350 mm Max. height 2300 mm Total machine weight 11,000 kg