Used Cold Water Tank for sale (18,974)

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Iisdpfx Ahjx Uy Rljneg Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system Iiedpfx Aswruw Uehnjg * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: good (used), total width: 3,245 mm, 35m³ heated tank Diameter 3.245 mm Vertical, standing tank. Cylinder and bottom plate thickness: 3.1mm Isdpszwm R Uofx Ahnjig Top plate thickness: 2.6mm

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Iijdpfx Ahszzvf Aoneg Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Iiedpfx Ahjzlt Aysnjg This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: excellent (used), Year of construction: 1998, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 1998 Welfit Oddy 20FT ISO Tank Container 23,980 L / 1-compartment UN PORTABLE T11 bottom discharge steam heating 5Y-+ CSC inspection valid until 10-2026 = Further information = General information Year of manufacture: July 1998 Model year: 1998 Usable material: Chemicals, construction water, fuel, wastewater Weights Empty weight: 3,860 kg Payload: 30,140 kg GVW: 34,000 kg Functional Load compartment volume: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Isdpfsztpftjx Ahnsig Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further information.

Condition: used, mileage: 1,001 km, color: white, driver cabin: other, gearing type: other, loading space volume: 3 m³, Vehicle location: Bovenden Superstructure: 2800l water tank with auxiliary frame! Iiodpfezrpv Nox Ahneg Year of manufacture unknown, as no identification plate is available! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: Like New / Unused Technical Data Product Type: ELUTION / Solution Tank Volume: 3,200 liters Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Tank Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20°C to +150°C Pressure vessel according to PED 2014/68/EU Module G – Single Inspection Notified Body: TÜV SÜD (Identification No. 0036) Permitted Number of Load Cycles: 7,300 / 5,475 at pressure fluctuation ranges of 3.3 / 4.5 bar TÜV / PED / FAT • EU Certificate of Conformity according to 2014/68/EU • Certificate No.: Z-EU-SI-LJU-20-08-2350154-14124056 • Inspection report available • Pressure test with water successfully completed Isdjykkbxspfx Ahnsig • Approval by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual acceptance • Turn-Over Package (TOP) fully available Complete Documentation Available The complete technical documentation package is available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Nameplate documentation • Assembly drawings • Detailed drawings • Welder lists and weld process qualifications • Work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gases • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Roughness protocol • Surface treatment report • Operating and maintenance manuals (equipment and components) The documentation scope meets project standards for pharmaceutical plants. Design Features • Double jacket for heating and cooling • Manufactured entirely from stainless steel 316L (1.4404) • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes / inspection openings • Clamp and flange connections • Instrumentation pre-installed (pressure, temperature, sensors) • Heavy-duty project design • Lifting lugs for crane handling • PED-compliant pressure design Condition • Never used in production • Stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media Special Feature This is not a standard tank, but a high-quality BRINOX project-built vessel in genuine pharmaceutical quality featuring: • PED Module G individual inspection • TÜV SÜD approval • FAT performed • Complete welding, material, and inspection documentation • Documented surface treatment • 316L construction for sterile applications Project quality for demanding GMP applications – immediately available.

Condition: used, mileage: 22,450 km, power: 100 kW (135.96 HP), first registration: 05/1994, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 9, Mercedes 814 D LF 8/6 5-speed manual transmission, differential lock, 9 seats, double cab with doors Water pump + water tank Iiedpfx Aozig Nnjhneg

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Iedpfxewq Sz Uo Ahnsig Qty 2 in stock Capacity 500 LTS Load cells Mixer Ancillary equipment included

Condition: used, Year of construction: 1998, total length: 4,000 mm, total width: 2,000 mm, total height: 2,600 mm, water tank capacity: 9,000 l, Item: AV-H0245.-Sileborg Horizontal Tank External dimensions: W 2000 mm, L 4000 mm, H 2600 mm. Horizontal stainless steel tanks – 2 units. Insulated with jacket. Top-mounted piping. Iedpfx Aewnnzlohneig Manhole at the top.

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Engine oil and oil filter changed - All diesel filters changed - Diesel tank cleaned and recoated - Hydraulic oil changed - Air filter changed - Excavator lubricated - 2 new batteries - Operating hours approx. 10,300 hours - Tires approx. 70 %. Isdpozrzymefx Ahneig - Excavator bucket width approx. 1.2 m - Excavator fully functional Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with step-wise control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-regulated sum control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard deep bucket volume: approx. 0.60 – 1.00 m³ 9926ä

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy 20FT ISO Tank Container 23,950L / 1 compartment IMO-1 Bottom discharge Steam heating DIN 17440 1.4401 22T6 2.5Y-+ CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, wastewater Weights Tare weight: 3,840 kg Iiedpfxsy Sxg Ho Ahnog Payload: 30,160 kg Gross weight: 34,000 kg Functional Cargo compartment volume: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 comp. (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid hydration during mixing without ice Isdpfx Ahsivdv Djnjig + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multi-tube stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters/hour - Peak cooling capacity*: 500 liters/hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Connection values: 400 V - 50 Hz - 1 phase - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 25 liters/minute - Dimensions: 1170 x 630 x 770 mm (L x W x H) - Net weight: 145 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Ijdpfezzvhdjx Ahnoig Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Iodpsz Agv Usfx Ahnjig - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Ijdpfxozz Rpcj Ahnsig - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Iisdpjz Ag Rrefx Ahnjg - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Iodez Agw Ejpfx Ahnjig - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Iedpfszc Ilxex Ahneig

Condition: used, mileage: 1,31,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun Iodpfx Aszz Tz Iohnjig * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: good (used), Stainless steel tank 50700l Diameter 3m Height 7.7m Stainless steel coil inside at the bottom of the tank. AISI304 stainless steel Flat bottom with a slope of 2.5% downwards. - Stainless steel hatch 410 x 520 with outward opening - Stainless steel drain valve DN70 - Stainless steel test pipe Isdpjtr Dvasfx Ahnoig - Liquid level gauge 16 pieces available.

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid hydration during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit Iedpsivdvcofx Ahnjig + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel refrigeration evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L100): + €389.00 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters / hour - Peak cooling capacity*: 180 liters / hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total width: 1,900 mm, total length: 3,720 mm, total height: 1,990 mm, pressure: 500 bar, operating pressure: 500 bar, fuel: diesel, overall weight: 1,800 kg, rotational speed (max.): 2,100 rpm, high-pressure hose length: 50,000 mm, water tank capacity: 300 l, empty load weight: 1,800 kg, temperature: 95 °C, fuel tank capacity: 100 l, type of cooling: water, hose length: 25,000 mm, power: 45 kW (61.18 HP), water pressure: 500 bar, pump capacity: 40 l/min, Equipment: type plate available, The HDT60, in its hot water trailer version, covers a pressure range of 400 to 500 bar with a flow rate of 33 to 40 l/min. The pump is driven by a water-cooled 4-cylinder turbo diesel engine. To ensure longevity and corrosion resistance, the frame inside the trailer, which is made of hot-dip galvanized steel, is one of the features. Additionally, the frame is primed and then painted, which creates a very attractive appearance. The frame can be easily pulled out for maintenance. The CD60, in its trailer version, can be configured with numerous options, such as a hot water boiler, an electrically operated hose reel, a remote control, etc. However, it is not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate HDT60-400 400 bar 40 lpm HDT60-500 500 bar 33 lpm General specifications: ----- Drive engine: Kioti turbo diesel 4-cylinder, water-cooled, Stage V (Tier 0 without AdBlue available on request) Power of drive engine: 45 kW Speed of drive engine: 2100 rpm Iiedpfx Ahjhgbkusnsg Fuel tank: 100 L Max. fuel consumption: 6.8 L/h Water tank: 300 L Burner output: 2x 105 kW Max. water temperature: 95°C Dimensions and dry weight: 3720 x 1900 x 1990 mm (1,800 kg) • Automatic pressure detection for easy start-up and operation. • Automatic idling for higher fuel savings. • Overpressure detection for increased safety and pump protection. Standard accessories included in the scope of supply of each machine: • 50 m high-pressure hose & 25 m low-pressure hose • HD gun with shut-off valve • Double lance with side handle • Nozzle holder with nozzle(s) • Telematics for remote monitoring. Remote monitoring via telematics. Optional accessories: • High-pressure hoses in special lengths • Special hose connections • Pneumatically operated pressure relief valve "Tumble Box". • Selection of various spray guns: manual, electric and hydraulic. • Surface cleaner • Spare parts kits • Wireless control and diagnostics with hand-held transmitter • Ethernet API for control and diagnostics. Alternatively available as a skid or/and cold water version.

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, parking heater, trailer coupling, From our range of new vehicles, we offer you: TLF 3000 All-Wheel Drive on a rugged MAN TGM 13.290 4x4 Off-road Chassis This vehicle is ideal for small and medium-sized fire departments in rural areas looking for a compact and robust truck capable of handling a wide variety of tasks while providing a large water supply. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with matching track for excellent off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA holders in the crew compartment Bodywork: • High-quality frame construction using stainless and corrosion-free materials • Folding steps for each side equipment compartment • Customizable stainless steel equipment mountings to your specifications • Walkable, non-slip roof Iedpfoxyunaex Ahnjig Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high pressure pump FPN 2000-10 • PUMP&ROLL capable • Output 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating in the pump compartment Firefighting Equipment: • High-pressure rapid intervention line with 50 m of rigid hose • Foam/water monitor (2,000 l/min) mounted on the roof • Self-protection system with 4 nozzles in front of the wheels Safety and Lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system (Martin horn) • 100 W public address system with microphone • Reversing camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the superstructure plus additional work lights • Pneumatic LED light mast with remote control • Optional hygiene board available We would be pleased to provide you with a detailed offer and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, no guarantee for completeness or accuracy. This advertisement constitutes information only and does not represent a binding offer. Subject to prior sale!