Used Crimping Pliers for sale (230)

Condition: used, Year of construction: 1992, functionality: fully functional, RENZ Wire Closer Model CLE 70 Year 1992 CLE 70 electric spiral crimping device: Electric crimping via foot pedal Binds up to 34 mm (340 sheets) in one cycle Efficiency approx. 400 cycles/h depending on the type and format of the material Foot-operated cycle start allows positioning the material with both hands Supports spirals with a diameter of 3/16” – 1 1/2” regardless of pitch Quick settings of various spiral diameters in just a few seconds Quiet operation. The device does not require a compressor. Hnedpezzyw Aefx Ah Sot

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Furnishing: - various replacement rollers Hodpjxabmcofx Ah Sjnt - hand crank - front stop

Condition: used, Year of construction: 2023, machine/vehicle number: ET195, Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates, motors, boards, and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type. complete overhaul of the glue group for the l-shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of: auger entry/exit star counter star Hjdpfx Ajvlnv Eoh Ssnt 11. one seal format per glue group for adhesive rotary labeling up to 6000 complete with: 1 warehouse 3 blades 1 hook drum Delivery time equipment of the Used adhesive labeling machine overhauled: This PE labeler can be serviced and delivered in approximately 90 working days from the order and payment of the first deposit. It is important to approve all technical drawings and label measurements for the PE labelers. This allows orders for replacement materials for the PE labelers to be prepared in an efficient time. In this particular historical period, we encounter very long delivery dates for electrical materials. Is for this reason that it is very important to plan the entire project in the correct direction to avoid wasting time for the PE labelers overloaded. For the installation of the PE labelers we only use our own direct workers, to give safety to our customers. We follow the entire process from start to finish and to the commissioning of the new or used machinery.

Condition: ready for operation (used), Year of construction: 2017, Suitable for: screw caps, drop inserts, press-on caps, flip-top caps, cup-to-cup closures, pipettes, brushes, spray pumps, triggers, rubber stoppers, crimp caps, ROPP caps and other closure types, equipment: mechanical rotary indexing table, pneumatic cap feeders, closing station for 1 closure type, extraction connection, IBC including drip tray, continuously adjustable transition from the discharge arm, machine enclosure: stainless steel 1.4301 (AISI 304), max. output depending on bottle, fill level and closure type: 60 bottles/min, compressed air connection filtered, oil-free: 6bar, connected load: 1.5kW, power supply: 3x 400V, connection area height: 792mm, cable routing: 317mm, overall length: 4200mm, with documentation. An on-site inspection is possible. Hnjdpfx Ahszadkle Sot

Condition: good (used), Chain pipe wrench, pipe chain wrench, chain pipe wrench, chain wrench, chain pliers, pipe clamping system, pipe welding machine, pipe assembly device Hnedpfx Ahoz Az Trj Sjt -Chain wrench: Pipe chain wrench type No. 33 1/2 /47 1-6 -Length: 1210 mm -Dimensions: 1210/110/H110 mm -Weight: 12 kg

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor Hnjdpfx Ajixz A Eeh Set HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: new, Year of construction: 2024, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Axle length 300 mm - Ejection 200 mm - Roller diameter 126 mm - Foot control - Brake motor - With 4 roller sets - Emergency stop - Documentation Hnodsunv I Rjpfx Ah Set - 400V

Condition: new, Rollmak Motorized Beading Machine BM 250 Includes 3 tool sets Technical specifications Tool diameter: Ø95 Shaft length: 260 mm Hodpfxoum Tzxe Ah Sont Bending capacity: 2.5 mm Rotation speed: 3.5 m/min Motor: 1.1 kW Dimensions L-W-H: 1550x550x1200 mm Weight: 295 kg CE marking

Condition: ready for operation (used), BAMA 3000 Collator - 6 stations Hnedpfxjzdc Hge Ah Sjt - Crimp-look stations - Cobeflex stations - Ink fountain numbering unit (with cams, rings, and folding gears) - Gluing unit - Punching and die-cutting stations for sheet-fed production with an outfeed conveyor - Center die-cutting for double-sided production - etc. Note: Machine is complete and in perfect working order. Availability: Immediate.

Condition: used, Line consisting of: No. 1 crimping machine brand Siat, model SM481, usable width cm. 90, usable height cm. 35 no. 1 Conveyor belt useful width cm. 90, useful length cm. 160 Hnsdox S Nk Ajpfx Ah Sst nr.1 Rejector Strapac, model SS-80, usable width 80 cm, usable height 50 cm or No. 1 Strapping machine brand Strapex, model Ecopack DE94, usable width cm. 120, usable height cm. 40 no. 1 Conveyor belt useful width cm. 90, useful length cm. 160 no. 1 Automatic stacking machine, usable width cm. 90, usable length cm. 150 Total footprint of the line 750 cm x 150 cm Line codes: 920568 – 920567 -920565 – 920564 – 921003

Condition: new, Year of construction: 2025, MODEL : HF500 6” (12”) NAME: PANT CRIMPING PRESS- HEAVY DUTY Hjdswbtaaepfx Ah Sont Power 500 Ton MAX CRINPING RANE: 310MM OPENING TRAVEL: + 115 MMM OPENING WITHOUT THIS : 360 MM 90° ELBOWS 3” CLOSING SPEED: 18MM/SEC PRESSING SPEED: 1.4MM/SEC OPENING SPEED: 20MM/SEC NOISE LEVEL: 62 DBA DIVER: 5.5 KW 3 VAC SIMENE'S TOUCH SCREEN CONTROL PROPORTINAL PRESSURE POSOTONE CONTROL FIYAT: €64,000 DAP DELIVERY ON STOCK

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, POLY-CLIP FCA 3430 | Automatic clipping machine Manufacturer: Poly-clip System GmbH & Co. KG Model / Type: FCA 3430 Serial number: 859 Year of manufacture: 2011 Power supply: 400 V / 50/60 Hz / 3 phases Rated current: 4 A Power: 2.8 kW Dimensions: 1600 x 1250 x 2000 mm Hnodpfx Ahey Um E Ao Sjt Machine weight: 595 kg Caliber range: approx. 24 - 60 mm Maximum cycle rate: up to 200 cycles/minute The Poly-clip FCA 3430 automatic clipping machine is an advanced, high-performance device that represents the absolute standard in the meat, sausage, and delicatessen processing sectors. This machine is used for automatically closing casings (both natural casings and collagen, protein, cellulose, and plastic casings) using aluminum clips. It is a key component in medium-sized and large meat processing plants for the mass production of sausages, frankfurters, kabanos, pâtés, salami, and dense food products packaged in sleeves (e.g., processed cheese, lard, offal). The FCA 3430 model is characterized by exceptional operational precision. When synchronized with a vacuum filler (e.g., Handtmann, Vemag), the machine automatically receives the filling, forms a baton of the desired length or weight, precisely crimps two clips simultaneously (closing the end of one baton and the beginning of the next), and – if required by the process – cuts the finished product using an integrated pneumatic knife. The machine flawlessly cooperates with the clip feed system, allowing for the automatic preparation of sausages for hanging on smoking sticks.

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs Hnodpfx Asw U Eg Rjh Sot * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: new, Year of construction: 2026, throat depth: 250 mm, - Capacity 1.2 mm - Ejection 250 mm Hjdpfx Ahjr Hr Dwj Sent - With 8 roller sets

Year of construction: 2008, operating hours: 30,000 h, condition: ready for operation (used), Automation equipment manufactured in 2008. This KOMAX Alpha 433 L system is designed for the automatic processing of cables, including cutting, stripping, crimping, and welding. It includes a Komax ADS 123 wire storage unit, safety enclosure, extraction system, and various crimping and processing modules. If you are looking to get high-quality cable processing capabilities, consider the KOMAX Alpha 433 L machine we have for sale. Contact us for further details. Komax ADS 123 (Wire Storage Unit) • Manufacturer: Komax France • Power Supply: 3 × 400 V (3P+N) • Frequency: 50–60 Hz • Maximum Power Consumption: 5,500 VA • Air Pressure: 4–6 bar Cosmotec Cooling Unit • Manufacturer: Cosmotec • Model: XVA36 03 320 • Frequency: 50/60 Hz • Current: 0.51 A Schunk KM-CFK-564MF (Welding Module 1) • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Schunk KM-CFK-564MF (Welding Module 2) • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA Hnsdpszg Hm Uefx Ah Sot • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Scope of the system: • Komax Alpha 433 L fully automatic machine • Komax ADS 123 wire storage unit • Safety enclosure • Extraction system (AAT 260) • Operating computer and control unit • Various crimping and processing modules, optional • Further optional accessories available upon request Used for: • The system is in working order and has been used for the automatic processing of cables, including cutting, stripping, crimping and welding • All systems are currently still powered and fully functional • Approximately 30,000 machine hours

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs Hedpjfnk I Eofx Ah Sent -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Hsdpjyl U Sqefx Ah Sont Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: new, Year of construction: 2024, - Capacity 2.5 mm - Axle length 250 mm - Ejection 160 mm - Roller diameter 96 mm - Foot control - Brake motor - With 4 roller sets - Emergency stop - Documentation Hnedeur Hf Uopfx Ah Set - 400V

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Hjdpfxozucxco Ah Sjnt Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: good (used), Hang 102-20 Eyeleting machine with base This device is like new, the latest product from Hang. Hnjdpfxezlgfnj Ah Sjt Made in Germany. Technical specifications: 1 head Eyelet diameter: No. 24-25. Inner diameter: 4mm. Maximum capacity: 20 sheets of 80gsm Front and side margins Manual operation The device feeds the Eyelet in the correct direction, punches holes, and crimps the Eyelet in a single pass. Instructions are included.

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Hodpsy Enwhsfx Ah Ssnt Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands.

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Hodpfezgl Hysx Ah Sent Motor power: 0.25 kW Motor speed: 1390 rpm Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone Hnedpfxszc N Axe Ah Sst 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: used, functionality: fully functional, Equipment: CE marking, IMMEDIATE AVAILABILITY (Great Deal!!!): Small Continuous Forms Production System, consisting of: 1- EDELMAN Form All continuous forms rotary press, 2-color offset with Roland-matic dampening system, roll-to-fold delivery, equipped with printing cassettes and perforation cylinders in the following formats: 8", 11", 12", 14". 2- Pack-to-pack collator with Crimp-Look, Multiflex, and Numbering stations (including cams, rings, and numbering holders in various formats). Hnedpfx Ahozb Uy Hs Sot Machines in "excellent condition" and ready for immediate delivery. We can disassemble them and load them onto trucks or containers, and we can also arrange shipping upon request.

Condition: used, Year of construction: 2023, Year: 2023 - the machine was put into operation in 2024 Status: very good, functional Counter: 640.000 only Configuration: - pliers size: "L" Hedpfx Ahsy Hq H Us Sent Specifications: - speed: 300 packages / h - maximum height on pallet: 1400 mm - automatic pallet switching