Used Deckel Maho Dmu 125 P for sale (341)

Condition: repair required (used), functionality: limited functionality, runs fine in 3 axle but 4 axle rotary table says reached in drive X-axis: 880 mm Y-axis: 630 mm Z-axis: Dcodpfx Abjuw Sv Decon 630 mm Fast travel X-axis: 30,000 mm/min fast travel Y-axis: 30,000 mm/min Fast travel Z-axis: 30,000 mm/min Manufacturer of controllers: Deckel-Maho-Heidenhain Table height: 700 mm Table length: 1,250 mm Table load: 700 kg Total weight: 8,800 kg

Condition: good (used), Year of construction: 2005, operating hours: 13,917 h, functionality: fully functional, machine/vehicle number: 11590000083, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Bidding obliges the buyer to pick up the machine on time by the end of February. The machine can be viewed under operating conditions until February 6, 2025.  TECHNICAL DETAILS x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control type: Heidenhain iTNC 530 Spindle Max. spindle speed: 12,000 rpm Dcjdpfjvu A S Hsx Abcon Tool holder: SK40 Tool changer Available: yes Tool positions: 32 MACHINE DETAILS Space requirement: 25 m² Loading dimensions (L x W x H): 3.2 x 2.3 x 2.7 m Weight: 9.6 t Operating hours (as of week 45/2023): 45,746 h Spindle hours (as of week 45/2023): 13,917 h EQUIPMENT - Chip conveyor - External coolant system - 50 x SK40 tool holders

Condition: used, Year of construction: 2004, functionality: fully functional, We offer you: Machining Center - universal Manufacturer: Deckel Maho Type: DMU 80 T Year of manufacture: 2004 Control: Heidenhain MillPlus Technical Data: x-axis: 880 mm y-axis: 630 mm z-axis: 630 mm Max. spindle speed: 12,000 rpm Table size: 1,250 x 700/ ⌀ 800 mm Max. table load: 700/ 500 kg Center drilling: ⌀ 50 mm Tool holder: SK40 Tool changer: 32 (2x16) positions Max. tool diameter: 130/ 80 mm Max. tool length: 250 mm Max. tool weight: 8 kg Feed rate (x/y/z): 20 - 15,000 mm/min Rapid traverse (x/y/z): 30 m/min Machine weight: approx. 10 t Operating hours: approx. 92,738 h Spindle hours: approx. 16,096 h Technical Features: - ICS (internal coolant supply) Accessories: Dcjdpfx Aovx Tidsbcon - Chip conveyor - Measuring probe Accessories, depicted tools, and clamping devices are only included in the delivery if mentioned in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: reconditioned (used), Year of construction: 2008, Partially overhauled milling machine Axes: 5 Control: Siemens 840 Solutionline Spindle: SK 40 / 18,000 rpm Equipment: 3D Quick Set for kinematic measurement, Heidenhain 3D measuring probe Dedpfx Abjv Acgyscocn Handwheel Internal cooling system 40 bar Chip tray (no chip conveyor)

Condition: good (used), Year of construction: 2008, operating hours: 23,532 h, functionality: fully functional, machine/vehicle number: 11760001053, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 480 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area Travel: 450 mm x 400 mm x 480 mm Main drive Motor spindle: 18,000 1/min incl. active cooling Dodpfx Aju Ra I Isbcscn Power: 15 kW (40 % ED); 10 kW (100 % ED) 3D control: Heidenhain iTNC 530 Tool holder Type: SK 40 according to DIN 69871 Tool clamping: according to DIN 69872 Equipment Swivel head: controlled NC swivel milling head (B-axis) Tool changer: Pick-up system, 16 magazine positions SK 40 Rotary table: NC rotary table diameter 450 mm Chip conveyor: available Control: 3D path control Switch-on time: 55,916 h Spindle time: 23,532 h See attached technical drawings (linked below). EQUIPMENT Tool changing device Chip conveyor 3D path control

Condition: ready for operation (used), Vertical machining center, travels: X mm630, Y mm560, Z mm560, spindle attachment SK 40, 20-position tool magazine, table mm1000x600 cnc Heidenhain TNC426 Djdpfx Abewf U Ndocecn

Condition: good (used), functionality: fully functional, Cover Maho DMU 50 T The machine is in good condition. -Control: Millplus M -Travel X-, Y-, Z-axis: 500/400/400mm -feed speed 0.01-10000 mm/min -rapid traverse 12 m/min -Spindle speed: 20-9000 1/min -Tool holder: SK40 DIN 69871 -Tool magazine with 16 places -Machine weight approx. 3000kg -Transport dimensions (L x W x h) 2.00 x 1.52 x 2.14 -Incl. 4 machine feet -Incl. manual control unit -Display for rotation/swivel axis in control unit We are happy to offer you transportation, installation and commissioning on site. Everything from a single source: Dcjdou U Evpjpfx Abcsn We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: -service -maintenance -overhaul -automation of DMG machines and other well-known manufacturers. We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Year of construction: 2006, operating hours: 7,150 h, condition: good (used), functionality: fully functional, 5-axis machining center from DMG - Deckel Maho Machine was recalibrated and aligned by service technician in September 2022 TECHNICAL DETAILS axes (X / Y / Z): 730 / 560 / 560 mm C-axis rotary table: Ø 600 mm C-axis: continuous B-axis tiltable: -30° / +120° spindle speed: 12.000 rpm rapid traverse: 30.000 mm/min working feed: max. 30 m/min workpiece weight: max. 700 kg table clamping surface: 1.000 x 600 mm ATC: available Cone: SK-40 DIN 69871 Magazine for tools: 24 positions CNC control: Heidenhain TNC 530 i switchable to ISO control Heidenhain HR-410 3D quick Set: available 3D probe: probe TS 642 Heidenhain DETAILS ABOUT THE MACHINE weight: 6.500 kg space requirement: approx. 3.5 x 3.5 x 2.5 m operating hours: 22.255 h spindle hours: 7.550 h motor power: 15 kW Total power requirement: 34 kVA Dcsdpfx Abslyqumjcsn Operating mode: 4 EQUIPMENT - chip conveyor - electr. handwheel - documentation - coolant device

Condition: excellent (used), Year of construction: 2011, operating hours: 64,433 h, Machine Type: Universal 5-Axis CNC Machining Center Manufacturer: Deckel Maho (DMG MORI) Model: DMU 60 eVo Linear Year of Manufacture: 2011 Control System: Heidenhain iTNC 530 HSCI Machine Base: Gantry design with linear drives in X and Y axes Configuration: 5-axis simultaneous machining with NC swivel rotary table Travel (X/Y/Z): 600 mm / 500 mm / 500 mm Swivel Range (B-axis): -5° to +110° Rotation Range (C-axis): 360° Table Size: 600 mm x 500 mm Max. Table Load: 400 kg Spindle Speed Range: 20 – 18,000 rpm Spindle Power: 35 kW / 25 kW (40% / 100% duty cycle) Max. Torque: 130 Nm / 87 Nm (40% / 100% duty cycle) Tool Taper: HSK-A63 Tool Magazine Capacity: 60 positions Max. Tool Weight: 6 kg Max. Tool Length: 300 mm Max. Tool Diameter: 80 mm (130 mm with adjacent slots empty) Rapid Traverse (X/Y/Z): 80 m/min Feed Rates (X/Y/Z): Up to 80,000 mm/min Total Power Requirement: 68 kVA Machine Weight: Approximately 10,000 kg Machine Dimensions (L x W x H): Approximately 5.0 m x 5.0 m x 3.0 m Additional Equipment: • NC swivel rotary table • High-pressure through-spindle coolant system (40 bar) Dodpswl Uwnefx Abcocn • Chip conveyor • Full enclosure with splash guard • Tool measurement laser • 3D quickSET • Oil mist separator • Air blow through spindle center • Test probe OMP 400 ⸻ This configuration is optimized for high-precision 5-axis machining applications in industries such as aerospace, automotive, and medical device manufacturing. The linear drive system in the X and Y axes provides high-speed and high-accuracy positioning, enhancing productivity and surface finish quality.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 17,362 h, functionality: fully functional, machine/vehicle number: 15035703814, travel distance X-axis: 750 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain 426, spindle speed (max.): 18,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 520 mm Z-axis travel: 520 mm C-axis: available B-axis: available Controls Control: Heidenhain 426 Handwheel: Heidenhain HR410 Dsdjv R Ez Nepfx Abcscn Table Table size: 700 x 500 mm Max. table load: 350 kg Spindle Speed range: 20 - 18,000 rpm Tool holder: SK40 Tool capacity: 32 tools Feed rate & capacity Rapid traverse: 20,000 mm/min MACHINE DETAILS Connected load: 50 kVA On-time: 75,856 h Program runtime: 17,363 h EQUIPMENT - Rotating B and C axes - Coolant tank with Pump - various tools

Year of construction: 2000, condition: excellent (used), Controll HeidenHain 3D 430 Spindle Taper SK 40 Power on spindle13 kW CNC Automatic milling head / Gr.-91 to + 12 Grad X – Travel 630 mm Y – Travel 560 mm Z – Travel 560 mm Table Length x Width 1000 x 600 mm Dcsdpfx Aegqbp Ujbcon Table load 500 Kg Number off controlled axis 4 ATC tool changer 20 Spindle speeds / ranges 18000 Rpm

Condition: good (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, Equipment: chip conveyor, rotational speed infinitely variable, We are selling a Deckel Maho DMU 200P 5-axis machining centre on behalf of a client. The machine is still in production and can be inspected on site by appointment. The DMU 200P underwent partial mechanical overhaul in 2020: - Replacement of the motor spindle - Replacement of all ball screws - Seals and wear parts A detailed service record can be viewed on site. Technical data: - X-axis travel: 1800 mm - Z-axis travel: 1100 mm - Y-axis travel: 2000 mm - Control: Heidenhain iTNC 530 - CNC rotary table diameter: 1400 x 1700 mm Dcodexhqccjpfx Abcjn Machine equipment: - Table load capacity: 6,000 kg - B-axis (infinitely variable) - 120-position tool changer - SK 50 interface - Spindle speed: 20–10,000 rpm - Internal coolant supply (IKZ) - 980-litre coolant tank - Chip conveyor - Rinsing gun - Infrared probe

Condition: excellent (used), Year of construction: 2011, Very good condition! Control: Siemens 810D Shopmill Spindle speed: max. 8,000 rpm Spindle mount: SK40 Dcodoxdfgnjpfx Abcon tool magazine: 16 seats Travel: X-500 mm, Y-450 mm, Z-400 mm Swivel rotary table : -5 / +110

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SIN840D SL B - axis -5 / +110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z/-axis 1 - 24.000 mm/min rapid traverse X/Y/Z 24,00 m/min spindle turning speed - stepless 20 - 10.000 U/min power capacity at 40 % load 13,00 KW power capacity at 100 % load 9,00 kW tool taper SK40 toolpiece magazine: chain magazine 30 Stück diameter of tools max. 80 mm tool diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg table surface area 630 x 500 mm workpiece weight 200 kg total power requirement 17,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 4,50 x 4,00 x H2,90 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, swivel rotary table, tool magazine 30-positions, HEIDENHAIN touch probe, Dsdpfjw Tm R Ujx Abcecn linear scales X/Y/Z, chip conveyor, electronical handwheel, 2nd work-area-door.

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Dodpfx Aowl R Dqsbcjcn Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Djdpfx Abevtnm Hscjcn Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: good (used), Year of construction: 2003, operating hours: 14,807 h, overall weight: 3,545 kg, input voltage: 400 V, year of last overhaul: 2015, Operating hours approx. 02/2025: Control on: 14807 h, machine on: 76429 h, program run: 39412 h 3D path control Dedpfx Abev Ab Rkjcscn Universal milling head with controlled B-axis SK 40 Shelf magazine with 60 magazine spaces SK 40 Infrared measuring probe, Heidenhain TS 641 NFS server Chip conveyor, Blechtechnik GmbH Cooling with extended media line, Bürener Maschinenfabrik GmbH The blue computer terminal in the picture in front of the machine does not belong to the machine The machine is still in use and can be viewed during our opening hours. The SK40 tool holders can be purchased, the tools are not sold. Sale from location without warranty and return. Dismantling and removal must be organized by the buyer.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop Dodpfx Ajv Sy Sfobcocn - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: used, Year of construction: 2010, 5-axis machining center Deckel Maho DMU200P Operating hours: 84,000 h Total spindle hours: 33,000 h last exchange (09/2023) hardly run since then - Available Immediately - Worldwide Export Dcedpfx Abjw Hlq Iocen Control: Heidenhain iTNC530 Travel: X-1,800mm, Y-2000mm, 1,100mm automatic swivel milling head: B-axis NC rotary table: C-axis clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12,000 rpm Spindle mount: SK50 tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar chip conveyor: , probe: Heidenhain TS649 Tool measurement: Blum Laser 3-D Quickset: , electric handwheel: Heidenhain Tools: 60 x SK50

Condition: used, Year of construction: 2006, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.200 mm Dedpfx Ajw E Nnnjbcscn C-axis 360 x 0,001 ° A - axis ° Control SINUMERIK 840D Powerline SIEMENS Size of table plate 900 x 700 mm milling spindle - taper HSK - A100 spindle turning speed - stepless 12000 U/min toolpiece magazine: chain magazine 180 Stück total power requirement 85 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 6,5 x 6,1 x 3,5 m 5-axis machining center with horizontal milling spindle arrangement SIEMENS SINUMERIK 840D Powerline control system Electronic handwheel NC swivel rotary table Rotoclear window Measuring probe ready Blum laser tool measurement Vibration sensor Tool taper cleaning 4th operating mode Internal coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling/heating unit

Condition: excellent (used), Year of construction: 2001, Deckel Maho DMU50 Evolution Control: Heidenhain iTNC530 Year: 2001 x-travel 500 mm y-travel 420 mm z-travel 380 mm control iTNC 530 Heidenhain power capacity - main spindel 25 / 35 kW turning speeds 20 - 18.000 U/min Torque (40 / 100%) 130 / 87 Nm tool taper HSK 63 Feed speed 20.000 mm/min rapid traverse X-axis 50 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min tools in tool magazin 100 positions Dcjdpfx Asxggl Dobcsn max. tool length 200 mm max. tool weight 6 kg max. tool diameter 50 mm surface area 500 x 380 mm center bore 30 H6 T-slot - distance 63 - 14H7 mm swivelling range 0° / +180° (B-Achse) swivelling range 360° / 0,001° (C-Achse) max. table load 200 kg Rapids C - Axes 33 min -1 rapid traverse B-axis 26 min -1 total power requirement 38 kVA weight of the machine ca. 6,0 t Accessories/options: - Blum tool measuring system - Swarf conveyor - Through spindle coolant - Documentations Under power in our warehouse!

Condition: ready for operation (used), Year of construction: 1999, operating hours: 14,249 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel Paths Travel path X-axis: 800 mm Travel path Y-axis: 700 mm Travel path Z-axis: 600 mm Work Table Dcodpfx Absxcvy Aocsn Table width: 800 mm Table height: 700 mm Table length: 600 mm Swivel head: H / V 0/90 Spindle speed range: 20 - 12,000 rpm (infinitely variable) Gear stages: 2 Spindle motor: 16 kW Tool holder: SK 40 Tool positions: 60 Number of pallets: 4 Max. workpiece weight: 800 kg MACHINE DETAILS Control system: Heidenhain MillPlus Rated apparent power: 44 kVA Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,577 x 2,500 mm Total weight: 14,000 kg Number of spindles: 1 Input voltage: 400 V Type of input current: three-phase Operating Hours Spindle hours: 14,249 h Power-on time: 57,853 h EQUIPMENT Chip conveyor Internal coolant supply (IKZ) Electronic handwheel Oil mist extraction

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Dodpfxexf Htxj Abcocn Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Dodpfexfcqysx Abcecn Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 7500 kg Dcjdexgi Twopfx Abcjn Control Unit Brand SIEMENS Model SINUMERIK 810D powerline and ShopMill Main Drive Spindle speed range 50–12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 40 m/min Table Table load 600 kg This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2007. It features a Siemens 810D ShopMill control, SK40 spindle with speeds up to 12,000 rpm, and a tool magazine with 30 positions. The machine includes a chip conveyor, coolant gun, and a high-pressure coolant system. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling