Used Edalco Tapping for sale (1,053)

Condition: used, Year of construction: 2015, machine/vehicle number: 188786, Tapping machine Make: MAXION Model: BT 15 GL Year of manufacture: 2015 - workshop tested Machine no.: 188786 4 speeds 320, 560, 1,000 and 1,600 rpm. Accessories: - Lead screw device for jig-like threads - Lead screw change by means of quick coupling - Safety device against tool breakage Ledpfx Adsvc A U Dowshb - Program for single or continuous cycle - electronically controlled motor braking for single cycle - Electrical hood guard - electric chuck protection hood - 3m connection cable with 16A CEE plug - operating instructions incl. the following options: - Pull-out circuit After the safety device is activated device is activated, this enables the quill to be return the quill to the home position at the the push of a button. Without this device, the spindle must be the spindle must be turned back manually until the the home position.

Condition: excellent (used), Tapping chuck Make Bilz Lhjdpfxot R Tbge Adwsb Type DSPL 3 (28522) Cutting range M 9 - M 24 maximum shank diameter 18 mm length compensation approx. 10 mm Total length 285 mm Weight 5.5 kg

Condition: excellent (used), Quick-change adapter (28486) Make EMUGE Type KSN4-MK4 Lhjdpfxotrnigj Adweb compatible with Bilz WES 3 holders

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Lhsdpfx Ajhgnd Ajdwsb Good condition

Condition: like new (used), Year of construction: 2017, operating hours: 3,800 h, functionality: fully functional, Controller FANUC 31i Model B5 Table size 850 x 410 mm Max. table load 300 kgs X travel 700 mm Y travel 400 mm Z travel 330 mm A axis C axis 0 - 360 degree Distance between table surface and spindle end 250 - 580 mm Max. tool length 250 mm Max. tool diameter D80 mm Lhjdpfx Adextwxhswob Max spindle speed 24000 rpm Rapid speed X/Y/Z 54 m/min Feedrate 30 m/min ATC magazin 21-fold Tool holder type BBT30 Weight 2300 kgs Accessories, featureies - 4/5 axis with round table - RENISHAW TS27 tool presetter system - RENISHAW OMP60 zero point setting system - Chip conveyor - Coolant unit - Manuals The machine has been used little and the condition is like new. Ready to buy.

Condition: used, Year of construction: 2020, functionality: fully functional, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 12 mm, working range: 1,900 mm, overall weight: 13 kg, rotational speed (max.): 400 rpm, torque: 28 Nm, Tapping Range: M3 - M12 Lhjdpow Smr Asfx Adwjb Rotation Speed: 400 rpm Max. motor torque: 28 Nm Air pressure: 6 - 8 bar Working range: 150 - 1900 mm Machine weight: 13 kg Year: 2020 The pneumatically driven thread tapping machine DUMETA D-JSC-12A is designed for thread cutting in the range of M3 to M12. It features a compressed air motor and a quick-change chuck. The sturdy working arm can be mounted directly onto a workbench using the integrated flange. This allows the tap to be positioned flexibly at various locations on the workpiece without the need to reposition the workpiece itself. The design includes an adjustable angle, enabling the quick-change chuck to be tilted, so that both vertical and horizontal tapping operations are possible. Optional: Workbench with dimensions 2210 mm (L) x 940 mm (W) x 820 mm (H).

Condition: ready for operation (used), ERLO TCA-40 Drilling capacity in steel, diameter 40 mm (max) Throat 3depth 60 mm Stroke for drilling 200 mm Max threaded diameter M33 Spindle taper MT4 Diameter of column 175 mm Lodou Hyc Dopfx Adwohb Spindle speeds min/max 61/1169 rpm Dimensions of table 550x550 mm Ready for production!

Condition: ready for operation (used), functionality: fully functional, Electric index tab punching machine with automatic positioning for A5 or A4 formats, 2 - 31 tabs, capacity up to 25 sheets. The Onglematic 7 features a built-in, 90° inner round blade. With the Onglematic 7 index tab punch, both loose sheets and bound documents can be processed. Lodpfex Hh N Tox Adwshb Automatic punching is triggered by foot switch activation. Automatic or manual feed after each punch, as well as automatic paper clamping.

Condition: excellent (used), 1 used, very well-preserved thread cutting chuck M 14-30 for cutting internal threads on switchable drilling machines, lathes and milling machines. Can be used horizontally and vertically Brand: BILZ, Origin Germany Model: DSPL 30-MK4 • With Morse taper shank and tang according to DIN 228 B • With patented double chuck (clamps shank and square) • Elastic length compensation for compression and tension • Axis-parallel pendulum device and elastic length compensation for cutting precisely aligned threads • With clockwise and counterclockwise rotation Technical specifications: Suitable for threads M 14 - 30 Morse taper size Mk 4 Clamping range diameter min. 11 mm Clamping range diameter max. 23 mm Axis length compensation 30 mm Protrusion length 230 mm Axis-parallel compensation 2 mm Weight 12 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Lhjdpjwimm Nsfx Adweb

Condition: used, Table threading machine M1 - M10 Height adjustment via toothed rack and hand crank, motor 0,22+032 kW motor rpm 1420/ 2770 spindle Upm 480 - 580 Weight 100 kg Tapping chuck with key Lhsdpfxjda I E Ds Adwob Under table Connection cable with 16 A CEE plug

Condition: excellent (used), Tapping attachment Efem size 4 (28550) Mounting MK 3 Taps from M 10 - M 24 automatic changeover right - left Ledpfx Asuf N S Ajdwshb Total length 295 mm Diameter 105 mm

Condition: good (used), - Pneumatic motor GAMOR - Reinforced am structure made of hard aluminum (parallelogram) - Table fixing column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900mm - min: 200mm - Working air pressure: max: 7 bar - 840 lt/min - Weight: 18 kg Lhodpfx Adexr A Apewsb Sold without the welding table (as seen in the pictures), only the machine, which can be mounted on a table or similar.

Condition: used, Taps Pre and finish taps Ledodk Rgxspfx Adwehb R 1 3/4 inch

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS Lhsdpotnh Aljfx Adwjb

Condition: new, thread dia. M3 - M16 metrisch 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg Ljdpfjt Eahpox Adwjhb dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Includes connection for cutting oil supply! Adjustable angle. Quick-change chuck with slip clutch. Display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Documentation in English! Optional: Tiller table type: FL-WB

Condition: new, thread dia. M3 - M16 metrisch 250 U/min. 0 6 - 8 bar working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 250 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Lhjdpfx Adohiptgswsb Optional: clamping table with grooves type: FL-WB

Condition: used, Rubo H ½" Rubo H ¾" Rubo H 1" Rubo H 1 1/4" Rubometric GR 3 ½" Lhodpfx Ajxvtu Rsdwob Rubometric GR 4 ¾"

Condition: excellent (used), Tapping attachment Type Efem MK 3 (28520) Shank diameter on tap 21 mm Automatic right - left run Total length 285 mm Diameter 109 mm Lhodpfxet R S Ave Adwjb Weight 7.5 kg

Condition: used, 2 taps Before and finished Schneider Lhodpfedk Rgrjx Adwjb R 2 1/4 inches Weight 4 kg

Condition: excellent (used), Tapping chuck Make Efem Type GZ with MK 3 mounting equipped with dies M10 Lsdpfsg Ny Nhjx Adwohb chuck can be dismantled weight 3,5 kg

Condition: good (used), for spindle taper: MK 3 Drilling Ø: 10 mm Thread cutting: M 5 / M 8 min./max. Spindle distance: 35/120 mm Case diameter: 170 mm Lhodpfxsd R Atce Adweb Case length: 218 mm weight:

Condition: used, Cutting range M 16 - M 24 Mounting MK 4 Lodpsu Sk Uzofx Adwjhb

Condition: used, Cutting range M 24 - M 32 Mounting MK 4 Lhedpfeu Slalox Adwsb

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: Lhsdenyh Tnopfx Adwsb - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2022, condition: new, pneumatic tapping arm Model: R1950-08 Power: M2-M8 speed (rpm): 700 Air demand: 750l/min pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 27kg Adapter mounting: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-022 Lhjdpfx Aoipmr Iedwsb Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Standard accessories for all models: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling