Used Electrical Nic for sale (60,080)

Year of construction: 1997, condition: ready for operation (used), Offered is an Extruder AF 2 V Alimentazione Forzata with double degassing. Screw diameter: approx. 160mm, D ratio: approx. 37, DC drive, ABB rectifier DCS 500 visible, control: Siemens S5/S7, pelletizing: hot face/water ring, hydraulic unit: available, frequency inverter: Control Techniques / Emerson. Known defects: silo shortened/holes, vertical screw circuit missing, pelletizing shaft disassembled, screen changer frame warped. Inspection possible by appointment. Guedpsx Hhxnsfx Ah Dek

Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Tip: 1300 W / 20 KHz Gjdpfsh Rizzox Ah Douk

Condition: used, Used SGL Carbon Technic Sas (France) model CKL7 diam.16 - 10 blocks, graphite (DIABON NS1) heat exchanger/cooler-condenser with surface area 102,6 sq. meters. Has 10 graphite blocks, each diameter 765 mm x 347 mm height. Construction material of shell P265GH (W.Nr. 1.0425). Process side rated full vacuum/3bar at 1 to 110 deg.C. Design pressure -1/3Bar at 1 to 110 deg.c. Service side rated 5 bar design pressure at 1 to 40 deg.C. Process side capacity 542 litre and service side capacity 648 litre. Product inlet diameter: 450 mm and 100 mm outlet. Dimensions: 1000 mm diameter x 4520 mm height. Mounted on (3) lugs. New 2010. Transport dimensions: 4700 mm lenght x 1 450mm width - 1700 hight. Transport weight: 5 600 kg, (only exchanger 4950 kg). Weight: Actual: Kg5600.0 Godsxw Tffjpfx Ah Deuk

Condition: excellent (used), Year of construction: 2017, operating hours: 25 h, functionality: fully functional, overall weight: 2,300 kg, fuel type: diesel, continuous power (apparent): 126 kVA, For sale an emergency power generator suitable for factories, a powerful 126kVA power will power many devices and machines. Gusdsv Rbt Uopfx Ah Dsk IVECO engine after a general check, replaced oils, filters, fully functional. Mecc Alte power generator producing up to 126kVA, this generator was connected in one hall and used only once for 3 hours! We are also able to make a generator body and deliver it to the specified address! More information from the seller. Automatic operation system: Thanks to the built-in ATS system, the generator is in "standby" mode and is constantly ready to start automatically when the power goes out in the network. The principle of operation is simple, after a specified time from the moment of the power outage, the generator will turn on by itself, while when the power returns, the generator will turn off, restoring the power from the network. A solution that will work great in gastronomy, offices, manufacturing companies - everywhere where the generator is an emergency source of energy. Additional advantages include a) maintenance-free b) no interference in the operation of the generator by third parties c) the fastest possible restoration of energy in the facility ✔ Automatic battery charging ✔ Start-up reliability ✔ Possible connection in single-phase and three-phase installations ✔ Mechanical lock Mecc alte 126 kVA = 101 KW AC generator Manufacturer: English Mecc alte Model: ECP 24 2S4 Fuel: Diesel Year of production: 2017 - but never used. Serial number: 0002006067 Meter setting: 10 M/h Weight (kg): 2300 IP: 23 Power: 126kVA CE marking: Yes Measurements: Length (m): 2.3 m Width (m): 0.8 m Height (m): 1.6 m Note The price given is in net value and is valid for Export and for companies. A large discount is possible for individual customers - We invite you to contact us directly by phone to get your best price :) ————— After price negotiations, we are able to record a detailed video (for a determined customer) or perform a computer test or paint meter test, so as to ensure comfortable conditions for purchasing equipment remotely. —————- Of course, we encourage you to come for an inspection, but if it is not possible, this form of purchase will be available, which guarantees a safe transaction. Additionally, the possibility of obtaining a technical guarantee with Assistance without a km limit. ————— THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN THE MEANING OF ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ANNOUNCEMENT OR OUT-OF-DATE ANNOUNCEMENT.

Condition: ready for operation (used), Year of construction: 2007, Fully Automatic, Computer Programme with Colour Screen, Godpfx Ahexy Iu Hj Djuk Treath seosors on delivery 4 4 Opening, Opticontrol on feeder

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11000477, Scansonic ALO3 DFD2W-2.1 – Laser Optics Head + Profinet Control Unit (Industrial Laser Processing) Manufacturer: Scansonic Optics Head Model: ALO3-DFD2W-2.1 Control Unit Model: ST Profinet (KYM0020 008AA) Optics Serial No.: 11000477 Optics Year of Manufacture: 03/2012 Condition: Used, technically flawless Description: Gjdjxyyiijpfx Ah Dsuk For sale is a professional Scansonic ALO3 laser processing head, including the original Scansonic Profinet control unit. The system is suitable for industrial laser applications such as welding, hardening, or precision machining in automated production environments. The ALO3 head is designed for high-precision applications with stable process control. The control unit offers Profinet communication and integrated parameterization functions as specified on the nameplate. Technical Data (according to nameplate) Laser Optics Head – Scansonic ALO3 DFD2W-2.1 Model: ALO3-DFD2W-2.1 Serial No.: 11000477 Manufacture Date: 2012-03 Patent Numbers: DE 100 06 865, US 6,596,962, EP 1,256,572 Designation: KG0243-029-BA Control Unit – Scansonic ST Profinet Model: KYM0020 008AA Control Software: V9.10 Parameterization: V9.10-A4A-PB-336-0F MAC Address: 00-21-4A-0B-36-0F IP Address: 192.168.0.200 Fieldbus: Profinet Fieldbus Assistant: 00-3011-06-CE-DA Firmware: V5.02 Typical Fields of Application (general, technically accurate information – based on Scansonic ALO systems) Automated laser processing Laser joining / laser welding Laser cladding Precise contour tracking thanks to adaptive optics Robot-assisted production lines High-dynamic laser processes in automotive and metalworking industries

Condition: good (used), Year of construction: 2014, with changing table (without automtic storage) ByVision Touchscreen and manual control unit In contrast to the CO2 ByStar, the ByAutonom can change the cutting heads and cutting nozzles automatically. At the very end, only a BySprint could do that and then the new Fiber again. This means I can cut thick and thin material one after the other and the machine gets the right cutting head. Technische Daten / technical details: Laserleistung / laser capacity 6 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Blechgröße x,y / sheet size x,y 3000, 1500 mm Schneidbereich x,y,z, / cutting area x,y,z 3048, 1524, 80 mm Antriebsleistung / drive capacity 51 kW Gewicht ca. / weight ca. 15000 kg Gedpfxoqmmkco Ah Deuk Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Gedoh Ri Abjpfx Ah Deuk Tip: 1300 W / 20 KHz

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Gsdpswk Nldsfx Ah Douk

Condition: excellent (used), Brand : CORREA Model : PRISMA-20 Type : CNC Godpfxex Dzf Te Ah Douk Cnc : HEINDENHAIN 530 Table dimensions : 2.000 x 900 mm Number of slot: 5 x 22 mm Distance between T slots: 200 mm Axis travels (X,Y,Z) : 2.000 x 1000 x 1000 mm Head type : Universal manual Taper : ISO 50 Speed range : 550 - 3.000 Spinale power : 22 kw Rapid traverse (X) : 12.000 mm/min Rapid traverse ( X) : 20.000 mm/min Maximum weight on table : 3.500 kg Machine weight : 14 tn Machine equipped with: Fairing Electronica hadwheel

Condition: new, Year of construction: 2025, total width: 680 mm, total length: 780 mm, total height: 670 mm, maximum load weight: 15 kg, tank capacity: 105 l, warranty duration: 12 months, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Guodex E S H Tspfx Ah Dek Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray without optional lifter function

Condition: excellent (used), CATALOGUE NUMBER 7768 TECHNICAL DATA - Max. workpiece width: 1100mm - Max. workpiece height: 180mm – From above: - Metal pressure roller - Unit – grooved rubber roller for calibration - Smooth, sliding rubber roller – From below: - Feed belt - Pneumatic belt oscillation with photo sensors - Electric table lifting - Two feed speed settings - Main motor: 15kW Gsdpfxexliybo Ah Dsuk - Feed motor: 1.65kW - Operating pressure: 6–8 bar - Extraction outlet diameter: 200mm - Dimensions (L/W/H): 1700x2240x2020mm - Weight: 1652kg FEATURES – Italian manufacture – calibrating sanding machine – Unpainted – Used machine in very good condition Net price: 16,900 PLN Net price: 4,020 EUR (subject to EUR exchange rate 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), functionality: fully functional, For sale: older freezing unit for cleaning rubber parts, older make. The machine is operational. Godpfjx A Sz Aox Ah Dsuk - Drum volume: 150 l - Working range: from -40°C to -130°C - Dimensions (incl. shaking/separation table) (W x L x H): 2.2 m x 4.3 m x 2.4 m

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Gedpfsxywr Iex Ah Douk -Manufacturer: MS Ultrasonic, Ultrasonic welding transducer, ultrasonic vibration unit with bracket -Welding converter: Type 20/4000L -Horn/Ultrasound sonotrode: see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H120 mm -Weight: 13.7 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C6085 colour production system. Item for sale: 1 x Konica Minolta AccurioPress C6085 with the following equipment: Includes Paper Deck PF-707m + LU-202XLm Includes Intelligent Quality Care Unit IQ-501 Includes Finisher FS-532 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 4,000,890 pages Guedpfxjxy Hz Se Ah Dsk Colour: Approx. 3,061,050 pages Black: Approx. 939,840 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1995, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Storage location: Nattheim Gedpfsvvkqyex Ah Deuk

Condition: used, Year of construction: 2020, Outstanding Bystronic press brake from 2020 including a large set of bending tools. Can be viewed under power upon appointment and available for immediate purchase. Full technical description and options in the attached document. Bending length: 3100 mm Gjdpjxx Trbofx Ah Dsuk Bending force: 1,500 kN Maximum stroke: 450 mm Machine weight: 13,200 kg

Year of construction: 1998, condition: ready for operation (used), General Data Gjdpfx Ahex D D Nzs Djuk Machine weight 9500 kg Measurements height 2760 mm Dimensions Machine Length 6600 mm Table Table load 4000 kg Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 29 kW Tool taper ISO 50 Movement X-Axis Movement 2500 mm Z-Axis Movement 800 mm Y-Axis Movement 800 mm This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2017, Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Gsdpfx Aoqz Ucioh Dsuk Year of manufacture: 2017 Type of refrigerant: R410a Number of fans: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg Condition: Excellent

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: MS Ultrasonic, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 35/1000L Godpfx Aexywq Deh Dsuk -Horn/Ultrasound sonotrode: see photos -Number: 2x ultrasound transducer units available -Dimensions: 270/110/H55 mm -Weight: 1.7 kg/pc.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C6085 colour production system. Item for sale: 1 x Konica Minolta AccurioPress C6085 with the following equipment: Includes SD-513 booklet finisher Includes RU-511 Includes Intelligent Quality Car Unit IQ-501 Includes Paper Deck PF-707m Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 3,464,582 pages Guodpjxy Htbefx Ah Dek Colour: Approx. 2,716,361 pages Black: Approx. 748,221 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1996, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Storage location: Nattheim Gedpfx Aovvkq Hoh Djuk

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 7,724 h, machine/vehicle number: 19500015 + 508267, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Bystronic, controller model: ByVision, bending force (max.): 40 t, working width: 1,030 mm, stroke length: 200 mm, distance between stands: 1,060 mm, installation height: 515 mm, operating speed: 1,500 mm/s, oil tank capacity: 100 l, travel distance X-axis: 300 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, overall weight: 4,000 kg, total length: 3,250 mm, total width: 2,800 mm, total height: 2,500 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, Equipment: emergency stop, finger protection, foot remote control, safety light barrier, For sale is an automated press brake with integrated robotic system from first owner, designed for serial sheet metal forming. Press Brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Technical Data Press Brake - Press force: 400 kN (40 t) - Working length: 1030 mm - Control system: ByVision Robot - Max. rated payload: 11 kg - Reach: 1100 mm - Axes: 6-axis - Repeatability: 0.02 mm - CE-certified safety modules Features - Fully automated bending cell with integrated 6-axis industrial robot - Single ownership - Installation dimensions (LxWxH): approx. 3.25 m x 2.8 m x 2.5 m - ByVision Bending operator terminal with 22" Full HD touchscreen Machine Condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically in perfect condition - Functional test: can be demonstrated during inspection - Location: Niederrohrdorf, Switzerland Terms - New price: CHF 250,000 (2019) - Selling price: CHF 150,000 (negotiable) - Dismantling, collection, transport: by buyer - Availability: immediate / by arrangement - Payment: advance payment / bank transfer - Warranty: The system is sold as seen and inspected, with exclusion of any liability for material defects. No warranty or guarantee provided. Seller accepts no further liability. Gusdex El Nhspfx Ah Djk

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1765, power: 696 kW (946.30 HP), Biomass boiler Uniconfort Biokraft 60, year 2007 (output 696 kW at 2 bar), designed to burn wood and green material with moisture content over 50%. Equipped with a moving grate and automatic loading via redler conveyor, it guarantees efficiency and continuous operation. High-efficiency, three-pass heat exchanger. Loading by pusher, not by auger. Automatic tube bundle cleaning with compressed air. Automatic ash removal by auger into a water bath. Includes all accessories for disassembly. Guedpfxjx Dnkps Ah Dsk Ideal for sawmills, workshops, and small businesses, it offers a sustainable, safe, and easy-to-manage energy solution.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: QDSonic, Ultrasonic welding transducer, Ultrasonic vibration unit -Type: 20200319 -Horn: Type -Ultrasonic sonotrode: Length 110 mm Gedpfx Ajxywmxsh Douk -Number: 2x ultrasound transducer units available -Price: per piece -Dimensions: 370/110/H110 mm -Weight: 6.7 kg/pc.