Used Empty Pallet Magazine for sale (12,871)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Ibsdpfx Aiezwvqkjyeb Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. Iedpszxf Hkjfx Aiyobb The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: ready for operation (used), Year of construction: 1998, Make: MIC Model: GH 130s 350T Ijdpez A Tqpjfx Aiyebb Year of manufacture: 1998 Lifting capacity: 1300 kg Lifting height: 3590 mm Mast height: 229 cm Fork length: 115 cm Machine weight: 1129 kg Includes external charger More information available upon request.

Condition: new, functionality: fully functional, ✅ New stock ✅ €4,179 incl. VAT ✅ Available immediately ✅ Shipping possible The SCHORR RR1000DHKB crawler dumper is a powerful and versatile mini dumper with hydraulic tipping drive and a payload capacity of up to 1,000 kg. Powered by a 15 HP single-cylinder 4-stroke petrol engine, it effortlessly tackles rough terrain and inclines. The self-propelled dumper is equipped with a robust track drive, ensuring a secure stand and optimal traction. The generous loading platform allows for the transport of Euro pallets, even with sidewalls closed. The hydraulic tipping skip makes unloading considerably easier, while the automatic front-opening of the skip ensures complete emptying without manual assistance. Removable side panels make the platform flexibly extendable, allowing for easy transport of larger or bulky loads. Thanks to the intuitive crawler drive, the dumper can be maneuvered safely and precisely even on uneven ground. The foldable ride-on platform enables comfortable travel over longer distances, and the 6+2 speed gearbox ensures precise control and speed adjustment. With a maximum forward speed of 6 km/h and reverse speed of 3 km/h, complex maneuvers on the construction site are easily managed. The RR1000DHKB is designed for outdoor use, combining robust construction with user-friendly operation. The engine features a recoil starter, and all fluids—fuel, hydraulic oil, and gear oil—are easily accessible for maintenance and refilling. Ibedpoxvbw Tefx Aiysb Dimensions: Total length 2240 mm, width 900 mm, height 1235 mm. The skip measures internally 1315 × 815 × 300 mm, externally 1390 × 880 × 300 mm, filling height closed 785 mm, and 485 mm without side panels. SCHORR provides comprehensive service: spare parts are always available, and repairs can be carried out in our workshop if necessary. Our team is available to answer your questions or offer advice regarding the RR1000DHKB crawler dumper. This dumper offers excellent value for money, is available immediately, and—thanks to its compact design and high payload—is the ideal solution for small to medium construction sites, landscaping, and industrial applications. We are happy to advise you and assist with any questions regarding the SCHORR RR1000DHKB crawler dumper.

Condition: used, Year of construction: 2000, Depalletising and palletising system for Euro pallets with PETCYCLE crates. The empties pallets arrive via a lift from above. They first pass through a pallet denester, in which the empties are fixed, the transport securing cord is cut off and vacuumed. The crates are then destacked and transferred to the bottle ejector. The pallets continue to the pallet magazine/loader. After the pallets have been reloaded, they are secured with a cord and transported upwards in the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Ibsdpfx Asx T Ak Seiysb Additional title: Depalletising and palletising Unloading capacity: 3600 crates/h Loading capacity: 3600 crates/h Power: 21 kW Voltage: 230/400 V Frequency: 50 Hz Compressed air: 6 bar, 30 Nm³/h Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x 1.5 l (300 x 200 x 365 mm) Running direction: right -> left Operation / Control: at control cabinet, Simatic OP17 / Simatic S7-300 Material: housing/frame constructions in black steel Position: free-standing with floor fixings Features: Pallet loading and unloading, roller conveyors, lifts for 1 x empty and 1 x full pallets, Eurapack pallet securing with cord extractor, unloader, pallet magazine, loader, Bornbinder pallet securing, protective grids, stairs and platforms, switch cabinets Layer patterns: composite stacking up to 5 layers

Condition: used, Year of construction: 2014, YCM NSV 156A – Vertical Machining Center Vertical machining center with a 30-tool tool magazine, controlled in 3 axes with a Fanuc MXP-200FB control system. New Z-axis cover will be installed, 3400 cutting hours, standing under power. - Working range X/Y/Z: 1530 / 650 / 610 mm - Table surface: 1630 x 650 mm - Spindle taper: ISO 40 - Spindle motor: 22/7.5 kW (1 min/cont.) Included Optional Equipment - Spindle speed 12,000 rpm, BT40 Big Plus, 22/7.5 kW (1 min/cont.) - Tool changer/magazine for 30 tools, BT40 Big Plus - Spindle chiller - High-lift chip conveyor, hinge-belt type - Full enclosure guarding with roof - Through-spindle coolant, 20 bar, via pull stud - Heavy-duty coolant pump, 3 bar - Coolant nozzles around the spindle - Chip flush-out - Oil skimmer - Automatic main power shutoff (M30) - M-code, 1 pair - Safety door - Foundation bolts - Tool length/diameter/breakage measurement (Renishaw TS-27R) - CE marked - Prepared for 4th axis Technical Specifications – YCM NSV156A Travel Travel X/Y/Z 1530 / 650 / 610 mm Ibedpfxozz Ad Ss Aiyob Spindle nose to table surface 80 – 690 mm Table Table surface1630 x 650 mm Number of T-slots, pitch6 x 18 x 100 mm Table load capacity1500 kg Table surface to floor 950 mm Spindle (tool standard MAS BT40 Big Plus)Speed, S5 12,000 rpm Max torque 127 Nm Feed Rates traverse X/Y/Z48 m/min Working feed X/Y/Z, max1 – 20,000 mm/min Motors Spindle (1 min/10 min/cont.)22.0 / 15.0 / 7.5 kW AC X-axis feed5.5 kW AC Y-axis feed5.5 kW AC Z-axis feed 5.5 kW AC Ball Screws X/Y/Z axis Ø 45 mm Tool Changer Number of tool positions 30 Changing system Random (tools swap positions) Tool standard MAS BT40 Big Plus Pull stud YCM Max tool length 300 mm Max tool diameter (all pockets occupied)76 mm Max tool diameter (with adjacent pockets empty)125 mm Max tool weight6 kg Machine Dimensions Height 3051 mm Floor space, approx.2770 x 3855 mm Weight, approx.10,000 kg Power requirement39.5 kVA Standard Equipment NSV 66A, NSV 85A, NSV 102A and NSV 156A, with Fanuc MXP200FB control system - Spindle motor Alpha T8i (22 kW / 1 min) - Speed 12,000 rpm, max torque 127 Nm - Spindle ISO 40 - Tool standard MAS BT40 Big Plus + YCM special pull stud - Spindle chiller - Chip augers, dual, on both sides of the table - Fully enclosed guarding with roof - CE marked - Fanuc MXP200FB control system with YCM software - PCMCIA card for easy program transfer and expanded memory - Memory 1280 m (512 kb) - 10.4" TFT color display with graphics - Manual Guide i – simplified menu-driven programming - AI Operation Plus - Helical interpolation - Tool offsets, total 200 - Coordinate systems: 48 - Synchronized (rigid) tapping - Macro B - Tool offset type C - High-speed function AI Nano CC - RS-232 interface

Year of construction: 2015, condition: used, We offer this used, fully automatic cucumber packaging system, manufactured in 2015. It is a Serfruit system, equipped with an Ulma SVC550 packaging machine and 2 Kuka robots. Year of manufacture: 2015 Description: Ijdpfjzu H Tdsx Aiysbb Pallets are placed on a roller conveyor near the floor. The roller conveyor moves the pallet from the pallet magazine into the robot cell. The robot picks up a layer of boxes and places them on a table, where they are separated. From this conveyor, the boxes are transferred one by one to a box emptying station, where the cucumbers are emptied. On a conveyor belt, the cucumbers are separated before being transported to the Ulma sealer. After the sealing unit, a corrugated conveyor transports the cucumbers to another robot cell. The labeling machine (Bizerba GLM-I) labels the cucumbers fully automatically. The robot has a gripper with 12 suction cups. It is capable of picking up 12, 11, 10, 9, or 8 cucumbers at a time. Depending on the selected program, 12 to 24 cucumbers can be placed in a box. The program can be adjusted as needed. As a standard setting, 12 cucumbers per box are used, and the installation is set for 180 cucumbers/minute with 12 cucumbers/box. A different number of cucumbers per box may reduce the system's speed. The cartons used to hold the packaged cucumbers are usually the same as those used for the unpackaged cucumbers. It is also possible to manually remove these cartons and place new ones into the system. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Iedoy Tybnepfx Aiyebb Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Ibsdek Abnvjpfx Aiyjb Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2003, functionality: fully functional, MHM SP3000 for sale, 14 pallets 10 print heads plus 2 empty stations for flash cure units The machine is equipped with a fully operational GoTo function It is extremely well maintained, all print heads are functional, and it comes with four Calmat MW flash cure units. We use it daily in our production, and it can be tested on site. Three sets of pallets: Ibodpfex Nv Szex Aiyob - Regular - 280mm for children's t-shirts - Sleeve pallets.

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 5000 is a powerful portal nailing machine for the automated production of pallets and crates. With up to eight nailing heads, two work areas, and a 750 mm stroke on the Y-axis, it offers a high production capacity for a wide variety of nailing patterns. The system features a 12-inch touch display, height adjustment, and individual control of the nailing heads. Downtimes are significantly reduced by the optional offline programming, as programs can be created and simulated outside of production. The automatic path optimization also ensures short travel distances and increases the cycle output while reducing resource consumption. General advantages: Modularity: Adjustable machine length and configuration to meet specific production requirements. Flexibility: Suitable for small pallets (two stations simultaneously) and large pallets (full work area). Automation: The machine optimizes the work process through automatic calculation of the most efficient and fastest nailing path. Nailing table with nailing bridge: Construction: Robust frame with a 65° inclination angle for ergonomic operation. Machine length: approx. 8500 mm (extendable/shortenable by 2000 mm or as per customer request). Work area: 1 pallet: max. 6000 x 1700 mm 2 pallets: max. 2500 x 1700 mm per pallet Stop system: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, cross rails, and top boards Iodpfeztanxjx Aiysbb Rivet plates can be used at all positions Pre-fabrication of the skids Optional special equipment with laminated veneer lumber for custom templates Optional aluminum clamping system Nailing bridge: Frequency-controlled for positioning the nailing heads Equipped with 6 nailing head units including feed cylinder, nailing head holder, release and nailing head shoes for limiting the insertion depth Manual nailing head quick adjustment for different pallet formats Safety features such as collision monitoring (the movement of the feed cylinder is constantly monitored) Start button directly on the nailing bridge Nailing heads: Type: depending on customer requirements (Bea, Bostitch, Max, Fasco,…) Nail capacity: Up to 90 mm nail length (longer nails available upon request) Option: Maxi-Coil magazines for up to 1000 nails Programming and control: Easy operation: Intuitive programming incl. visualization of the product to be nailed (pallets and crates) Control: Siemens PLC with touch panel Functions: Pallet programming directly on the control panel Pallet and nail counters, the machine stops as soon as the nails are used up Storage of created pallet programs Remote maintenance via internet connection Multilingual operation (German, English, Czech, Polish) Safety equipment: Emergency stop button on the machine and on the control panel Emergency stop at the start on the nailing bridge Option: non-contact safety laser scanner on the nailing bridge

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Iodpszh Uzisfx Aiyjbb Empty pallet supply for loading • Capacity approx. 12 pallets • Stacking height max. 1,800 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. Iedpfx Asxfg A Tsiyjbb FEATURES OF THE ROTOVID 135° BOX TIPPER: - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: like new (used), Year of construction: 2021, AUTOMATIC PALLET CHANGER Usable pallet dimensions mm2 x 650 x 400 Maximum permitted load on pallet kg2 x 250 TRAVELS AND FEEDS X axis mm 520 Y axis mm 400 Z axis mm 330 Rapid traverse X, Y mm/min 56,000 Rapid traverse Z mm/min 56,000 Working feedrate mm/min 1 ÷ 20,000 DIRECT DRIVE MOTOR SPINDLE Tool taper and shank BT30 Spindle speed rpm 12,000 Ibjdeyiu Duepfx Aiyjb Spindle motor power 30 min/continuous kW 7.5/5.5 TOOL MAGAZINE Umbrella-type tool magazine capacity 24 Maximum tool diameter mm 80/100 Maximum tool length mm 200 Fixed position tool selection

Year of construction: 2019, condition: used, functionality: fully functional, MAKE: Bragonzi MODEL: 110 CNC CATEGORY: Retrofitted Boring Machine RETROFIT YEAR: 2019 CNC CONTROL: Siemens 840D MACHINE WEIGHT: 28,000 kg Machine Dimensions Length: 4,500 mm Width: 4,200 mm Height: 4,100 mm Total Connected Load: 45 kW Spindle Boring Spindle Diameter: Ø 110 mm Spindle Nose (mounting type): ISO 50-7388/1 – DIN 69871, double drive keys Milling Cutter Mounting Diameter: Ø 221.44 mm Speeds and Feeds Continuous Spindle Speed Range: 15 – 596 rpm 50 – 2,000 rpm Spindle Motor Power: 22 kW Feed Rate X / Y / Z / W axes (infinitely variable): 2 – 5,000 mm/min Ibjdpfx Aisyb Rqzoysb Rapid Traverse X / Y / Z / W axes: 10,000 mm/min Axes Travels X Axis (longitudinal): 2,500 mm Y Axis (vertical): 1,500 mm Z Axis (transversal): 1,300 mm W Axis (quill): 550 mm Rotary Table Usable Pallet Dimensions: 1,040 x 1,350 mm Maximum Load: 4,000 kg Max. Rapid Rotation Speed: 3 rpm Tool Magazine Tool Magazine Capacity: 60 stations Tool Holder Type: ISO 50-7388/1 taper Max. Tool Diameter with Adjacent Stations (occupied/free): Ø 138 / Ø 280 mm Max. Tool Length (without taper): 400 mm Max. Tool Weight: 25 kg Machine complete with accessories

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 632, spindle speed (min.): 12,000 rpm, magazine for 40 tools BT40 toolholders MSC-501 control system 2 pallets Ibjdpfx Aiovun H Noyjb

Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. Ijdpfx Ajyw Rffeiyobb If interested or for further information, we are happy to assist you.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Siemens, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 300, Equipment: chip conveyor, documentation/manual, Hüller Hille NBH230 Sale without multi-pallet storage system. The machine can be integrated into an existing automation system or converted for manual loading. The professional conversion is carried out by the experts at GSN Maschinen-Anlagen-Service GmbH to OEM standards. Spare parts, repairs, conversions, retrofits, relocation, commissioning, and much more – all from a single source. Technical data and highlights: Pallet size: 630x800 (Additional pallets available) Year of manufacture: 2008 Tool interface: SK50 Control system: Siemens 840D Powerline Ibodpfx Aozzw Dteiyjb Main axes: X/Y/Z/B Spindle type: Geared spindle, 2-stage (Extended spindle housing) Spindle speed: 6,000 rpm Tool magazine: 300-place cassette magazine (6 units) Axis travels (X/Y/Z): 1200/1000/1200mm Coolant: 1200 l coolant tank including chip conveyor Rotary table (B): NC type, 0.001mm Additional equipment / options: Rotating transparent screen Tool drawer Remote diagnostics Feedrate torque monitoring Drill breakage monitoring Renishaw OMP60 measuring probe

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Ibjdpfx Asywicvsiyeb

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, overall weight: 11,600 kg, table length: 500 mm, table width: 500 mm, controller model: Fusion 640 M, rotational speed (max.): 15,000 rpm, rotational speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 35 rpm, table load: 500 kg, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Ibsdpfey Nz Iuox Aiyjb Table load 500 kg Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 4-axis machine Iodpfx Aioz Aq Dpjysbb X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle

Condition: excellent (used), Year of construction: 2007, CNC Control: MSX-501III X axis mm: 730 Y axis mm: 730 Z axis mm: 850 B axis mm: 0.001 Pallet size mm: 500 x 500 Number of pallets: 2 Table load capacity kg: 500 Cutting feed mm/min X, Y, Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 22/18.5 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Ibjdpfx Aieythpreyeb Tool magazine positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent pockets empty: 140 Max. tool length mm: 500 Max. tool weight kg: 8 Coolant tank capacity l: 760 Through-spindle coolant bar: Yes Equipment Chip conveyor Internal coolant Rigid tapping Manuals, electrical diagrams, etc.

Condition: like new (used), JBT Automatic Can Seamer with 48-Piston Filling Unit – Stainless Steel Iedpfxjzbi Nij Aiyebb JBT automatic can seamer with a 48-piston filling unit, designed to integrate product dispensing and hermetic can sealing operations within high-production industrial packaging lines. The unit incorporates a 48-piston filling system, enabling continuous and synchronized dispensing before transferring the containers to the sealing section. Its configuration is specifically designed for installations requiring high production speeds, consistent filling, and reliable container sealing. The machine features a robust industrial design primarily in stainless steel, with a fully enclosed and protected work area to ensure safety during production. MAIN FEATURES -Manufacturer: JBT -Type: Filling + automatic can seamer -Filling unit: 48 pistons -Rotary filling system -Automatic and continuous dispensing -Automatic can feed -Synchronized transfer between filling and sealing -Automatic cap feed/positioning system -Mechanical hermetic can sealing -Continuous industrial operation -Designed for high-production lines -Construction primarily in stainless steel -Complete enclosure of the work area -Access doors with inspection windows -Safety guards -Automatic lubrication/service system, depending on configuration -Integrable into complete filling and canning lines PROCESS Empty cans automatically enter the machine and are transferred to the rotary 48-piston filling unit. During their movement, the pistons perform controlled dispensing of the product into each container, providing a repetitive process suitable for continuous production. Once filled, the cans are synchronously transferred to the sealing section. The lid is positioned on the container, and the sealing system performs the mechanical seaming between the can body and the lid, resulting in a hermetically sealed container. The cans can then continue to: Can washers Inspection systems Weight checkers Detectors Autoclaves/retorts Pasteurizers Cooling systems Labeling machines Case packers Palletizers APPLICATIONS Particularly suitable for canneries and industrial food manufacturers who need to integrate filling and sealing in a high-capacity automatic line. Depending on the configuration, format, and dispensing system installed, it can be used for different food products packaged in cans, including products with liquid or semi-liquid components and other formulations compatible with the filling system. The JBT 48-piston unit is especially attractive for installations seeking high production capacity and simultaneous dispensing of multiple containers, immediately followed by automatic sealing. Machine available for inspection. Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2012, Deckel Maho NHX 4000 Horizontal Machining Center Horizontal Machining Center, Deckel Maho Type / Model: DMG NHX 4000 Condition: Used Year of Manufacture: 2012 Program Runtime: approx. 48,200 hours Spindle Hours: approx. 39,200 hours Technical Data Travel distances X / Y / Z axis: 560 mm / 560 mm / 660 mm Rapid traverse rate (X/Y/Z): 60 m/min Work table & Pallets: 2-way pallet changer, standard (APC) Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece dimensions (Ø x H): Ø 630 x 900 mm Pallet changing time: approx. 8.0 seconds B-axis (rotary table): 360° (division 0.001°, direct drive) Main spindle Max. speed: 12,000 rpm Drive power: approx. 11 kW Max. torque: approx. 110 Nm Tool interface: SK 40, tool changer STC Tool changer (ATC) Magazine slots: 60 magazine slots Max. tool diameter: 70 mm (with free adjacent slots up to 170 mm) Max. tool length: 450 mm Max. tool weight: 12 kg Electrical data Iedpfozxc H Ujx Aiyobb Power connection: 400 V 3/N, PE 50 Hz Power consumption: 33 kVa In max.: 48 A Max. fuse rating: 80 A DC control voltage: 24 VDC AC supply voltage: 230 VAC Equipment 1: Smartline Line 36kW Equipment 2: NX15 Dimensions & Weight Machine weight: approx. 8,000 kg Footprint / Dimensions (W/D/H): approx. 2,680 x 2,540 mm Control: Siemens 840D SL Equipment Indexing table Tool measuring system, 60 tools SK40 Direct measuring system Tool breakage control MSC Coolant system IKZ 35 bar Chip conveyor Signal light Inquiry item: Transportation costs in individual offer

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Iedsxwxc Ajpfx Aiyobb Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870