Used Engel Es 330 65 H for sale (252)

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate Bledpfx Agspdr Aijkod 660x560 Mould height min 200 mm

Condition: excellent (used), Year of construction: 1999, Angel ES 650/175 HL-V Closing 175 tons Year 1999 Scrow 45mm Blsdjpdrzhepfx Agkod Stroke volume 318 cm3 Enlarged clamping plate 820x750 Mould height min 250 mm

Condition: used, Year of construction: 1996, operating hours: 52,000 h, functionality: fully functional, machine/vehicle number: 30391, clamping force: 650 kN, overall weight: 9,000 kg, Machine is ready for transport. Operational and set up for use. Excluding temperature control unit, extraction, conveyor belt, and hopper. Installation height 250 mm. Including robot and safety cage. Blsdexfi Sqjpfx Agkjd

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Overall dimensions :3100 x 1950 x 2600 mm Bljdpfx Aoukn S Hjgksd Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Year of construction: 1996, condition: ready for operation (used), Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible. Bedpeynat Eofx Agkeld

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 Bljdpfx Aexcw T Regkod - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included) Blsdeyf H Nnjpfx Agkjd

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ Blodpeyf Htysfx Agked • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): Bljdpfxoyfrb No Agkjd • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Bodpfoyak A Iox Agkold Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC100 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Hydromotor for screw cylinder Bjdpfx Aofnqagogksld Injection unit size ES3550 Hägglunds Drives Type CA50 20 2 0 0 N 004

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Bljdpsyli Uasfx Agkjd Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Bsdpfoyli Ndex Agkjld Clamping unit: Clamping force: 110 t Distance between tie bars: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core puller x 1 Hardened injection unit - bimetal Machine was serviced by the authorized Engel service Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pump/motor: 18.5 kW Heating output: 9.2 kW Total output: 27.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock Blodpovygh Nsfx Agksd

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Bsdpfx Agjvxh Iusksld Immediately available from stock

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,235 h, General Data Machine weight 5300 kg Measurements height 1932 mm Bledox Nr Hzspfx Agked Dimensions Machine Length 3974 mm Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 800 kN This Engel Victory 330/80 Tech was manufactured in 2015. It features a clamping force of 800 kN, a screw diameter of 35 mm, and a maximum injection volume of 154 cm³. The machine dimensions are 3974 x 1437 x 1932 mm, weighing 5300 kg. Currently in production with excellent condition and 37,235 operating hours. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 330/80 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2003, condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Bsdpfsiiv Aqex Agkold

Condition: excellent (used), Year of construction: 2004, Engel ES 3550/600 HL Technical Data Year of manufacture: 2004 Clamping Unit: Clamping force: 6000 kN Platen size (W x H): 1480 x 1300 mm Minimum mould height: 500 mm Maximum mould height: 1700 mm Opening stroke: 1200 mm Ejector stroke: 250 mm Blodpfjx Up Umsx Agkod Ejector force: 110 kN Injection Unit: Screw diameter: 80 mm Shot volume: 1960 ccm Specific injection pressure: 1730 bar Screw length: 22 l/d Dosing stroke: 390 mm Number of heating zones: 6 Nozzle stroke: 700 mm

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Bedpfxex D Ecvj Agkjld Screw diameter 55 mm Clamping Unit Clamping force 2500 kN This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2005, operating hours: 50,888 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 22 mm, displacement volume: 38 cm³, injection weight: 25 g, mold height (min.): 150 mm, opening stroke: 333 mm, plate width: 470 mm, plate height: 280 mm, installation height: 330 mm, Engel ES 80/25 HLV machine in good condition. The machine is connected to power and can be inspected at any time. Tie-bar-less (holmlos). Bledpfx Aex Ex I Degkod

Condition: used, Year of construction: 2000, operating hours: 89,978 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 60 mm, displacement volume: 848 cm³, injection weight: 763 g, mold height (min.): 350 mm, opening stroke: 950 mm, plate width: 1,300 mm, plate height: 1,080 mm, installation height: 950 mm, Engel ES 2050/350 HL-V machine immediately available. Machine can be inspected in operation. Includes handling robot. Equipped with 2 DS core pulls, 6 integrated heating zones, and 1 air valve. Bsdpfx Asx Ex Azsgksld

Condition: used, Year of construction: 2007, clamping force: 120 kN, displacement volume: 154 cm³, injection pressure: 2,175 bar, overall weight: 7,300 kg, load hours: 70,000 h, screw conveyor diameter: 35 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 70.000 CLAMPING UNIT: - Clamping force: 120 t Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Bljdpfx Aoqy Uklegkod Einspritzdruck: 2.175 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 7.300 kg Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: used, Year of construction: 2007, clamping force: 120 kN, displacement volume: 154 cm³, injection pressure: 2,177 bar, overall weight: 7,300 kg, load hours: 62,000 h, screw conveyor diameter: 35 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 62.000 CLAMPING UNIT: - Clamping force: 120 t Bledpeqxympjfx Agkod Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Einspritzdruck: 2.177 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 7.300 kg Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Platen dimensions (table): 720 mm Mould height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Bledpjxwviajfx Agkod Injection unit: Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Machine weight: 5,300 kg

Condition: used, Year of construction: 1994, Used injection moulding machine from Engel Type: ES 500 100 HL Clamping force: 100 tons Max opening stroke: 500 mm Hydraulic return stroke: 130 mm Max mould height: 250 mm Blsdjxphz Ejpfx Agkjd Installation height: 750 mm