Used Ferrari 95 Rs for sale (35)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,530 h, load capacity: 46,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,900 mm, power: 257 kW (349.42 HP), empty load weight: 83,700 kg, total length: 12,000 mm, drive type: Diesel, construction width: 4,185 mm, Full container reachstacker Load center: 1780 Transmission: Dana TE32FF Condition: Ready for use and fully functional Technical condition: very good Front tires type: Pneumatic Nlsdpfxsxgyx Dj Aa Ijh Front tires size: 18.00-33 Rear tires Type: Air Rear tires Size: 18.00-33 EN: hydraulic support jacks for increase of capacity hydraulically sliding cabin central greasing system for chassis, boom + spreader rear view camera air-condition (automatic climate control) automatic spreader adjustment 20'-40' DE: hydraulic support for higher load capacity with larger outreach 2x central greasing for chassis, boom and spreader hydraulically sliding cabin with electronic air-condition automatic spreader adjustment 20-40 rear view camera

Condition: used, functionality: fully functional, machine/vehicle number: A26062, Year of construction: 2017, operating hours: 15,790 h, load capacity: 46,000 kg, lifting height: 16,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,800 mm, power: 257 kW (349.42 HP), drive type: Diesel, Full container reachstacker Chassis number: A26062 Mast type: Telescopic Nlodjuh A I Nopfx Aa Ijh Transmission: Clark Dana TE32FF Technical condition: good Front tires type: Air Front tires Size: 18.00-25 Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Size: 18.00-25 Rear tires Condition: 40 - 60% Sideshift, Heating, full cab, air conditioning, Central lubrication = Centrallubrication Camera = Camera

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL SPECIFICATIONS - Infeed width: 400 mm - Infeed height: 150 mm - Shaft width: 450 mm - Shaft diameter: 550 mm - Number of knives: 2 pcs - 3 toothed feed rollers each from above and below, 2×2.2 kW Njdem Nb Dvspfx Aa Ielh - Electric auto-reverse - Reversing mode - Belt feeder - Feeder length: 5,100 mm - Belt feed width: 400 mm - Main motor: 30 kW - Chipper dimensions (L/W/H): 2600x1500x1530 mm - Total feeder dimensions (L/W/H): 5200x560x910 mm - Weight: approx. 3,000 kg – with belt feeder – electric auto-reverse (adjustable) – reversing mode – Used chipper, in very good condition Net price: 68,900 PLN Net price: 16,200 EUR at an exchange rate of 4.25 EUR (Prices may change with significant rate fluctuations.)

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 8,500 h, load capacity: 32,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, power: 194 kW (263.77 HP), fork carriage width: 3,200 mm, fork length: 2,400 mm, empty load weight: 42,600 kg, drive type: Diesel, construction width: 3,400 mm, Heavy-duty forklift truck – diesel Load centre: 1200 ISO class: Terminal West Mast type: Duplex Transmission: ZF 3WG-191 Condition: ready for operation and fully functional Technical condition: good Nsdpfx Aasxp S Ats Ijlh Front tyres type: pneumatic Front tyres size: 14.00-24 Rear tyres type: pneumatic Rear tyres size: 14.00-24 EN: central lubrication system, rear view camera, quick release system, air-conditioning

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,600 h, load capacity: 32,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, power: 185 kW (251.53 HP), fork carriage width: 3,450 mm, fork length: 2,400 mm, empty load weight: 42,600 kg, total length: 9,315 mm, drive type: Diesel, construction width: 3,450 mm, Diesel forklift Load center: 1200 Nedpfew E T Ixjx Aa Ijlh Fork width: 300 mm Fork thickness: 110 mm Mast type: Duplex Gearbox: ZF3WG191 Condition: Ready for use and fully functional Technical condition: very good Front tires type: Air Front tires Size: 16.00-25 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 16.00-25 Rear tires Condition: 80 - 100% Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, air conditioning, CE certificate, twin tires,

Condition: used, Year of construction: 2007, Main electric motor: 320 kW, three-phase, 50 Hz, with a soft start system to reduce starting currents and mechanical load. Nedpfxsxpid Ie Aa Islh Feed roller drives: separate electric motors with gearboxes. Hydraulic drive: electric motor, pump, tank, system of distributors and pressure gauges. Feed type: roller with hydraulic pressure. Productivity: 300 bulk m3 per hour Finished chip size: 20–50 mm (adjustable).

Year of construction: 2020, condition: excellent (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel Nlodpfoxg Enwsx Aa Ish -Condition: Fans are unused (stock items) -Manufacturer: Ferrari, axial fan axial fan -Type: EF 905/I 4S/B A24 -Engine: Ferrari 11 kW 4P 160 50 Hz -Protection class: IP56 -Number: 3x fan available -Price: per piece -Dimensions: Ø 1000 x 675 mm -Weight: 196 kg/piece

Condition: good (used), Year of construction: 2002, functionality: fully functional, CNC MILLING MACHINE 5 AXIS MODEL S 630 Year of Manufacture: 2002 X Stroke 3000mm - Y 820mm - Z 1120mm High-speed electro spindle 3000 to 18000 rpm 3000 to 10500 rpm - 24KW 18000 rpm - 16KW Nodpfx Ajxqg H Aea Iolh Tool magazine ISO 40 - 30 positions 4th axis rotary table - distance between centers 3500mm This machine is dedicated for the machining of aircraft engine blades. Weight: 19000kg Very good condition Available immediately

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, spindle speed (max.): 20,000 rpm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller model: SIEMENS 840D SL, TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 520 mm Travel Z-axis: 480 mm Rapid traverse X: 40 m/min Rapid traverse Y: 40 m/min Nsdpfx Aaoxrctns Ijlh Rapid traverse Z: 30 m/min Tool holder: HSK 63A Max. spindle speed: 20,000 rpm MACHINE DETAILS Control model: SIEMENS 840D SL Dimensions & Weight Passage size: 2.40 x 2.80 m Net weight: 8,500 kg EQUIPMENT Chip conveyor Swivel head Digital linear scales (0.0001 mm) CTS spindle cooling Chip extraction system

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Gearbox: Clark/Dana Condition: Ready for operation and fully functional Technical condition: Good Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Piggy-back, hydr. sliding cabin Nljdpsxgyyuefx Aa Ijh

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 18481 Description: Gianni Ferrari Turbo 2, 1100 liter collector, 150 cm cutting width, height of collector 210 cm, approx. 1750 hours, 36 hp Kubota diesel, easy access for cleaning/service/maintenance. Unique collection ability even with damp grass. Ready for delivery Nljdpovg Acvjfx Aa Ish

Condition: used, Year of construction: 2014, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Nodpfx Aaew Ag Ndj Ielh Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm Nljdpslwqgaefx Aa Ioh - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Condition: used, functionality: fully functional, machine/vehicle number: A26012, Year of construction: 2009, operating hours: 11,155 h, load capacity: 45,000 kg, lifting height: 16,060 mm, fuel type: diesel, mast type: telescopic, construction height: 4,920 mm, power: 185 kW (251.53 HP), empty load weight: 85,500 kg, drive type: Diesel, construction width: 4,200 mm, Full container reach stacker Chassis number: A26012 Mast type: Telescopic Gearbox: Dana TE27 Condition: Ready for use and fully functional Technical condition: good Front tires type: pneumatic Front tires size: 18.00-33 Front tires condition: 60 - 80% Rear tires type: pneumatic Rear tires size: 18.00-33 Rear tires condition: 20 - 40% Nlodpfxsup Iufe Aa Ish Description: Stabilization, Air Conditioner, Central Lubrication, Heating, Scale Side shift, Heating, Full cabin, Air conditioning,

Condition: used, mileage: 16,306 km, power: 456 kW (619.99 HP), fuel type: gasoline, gearing type: automatic, first registration: 04/2021, next inspection (TÜV): 10/2027, color: black, Equipment: ABS, air conditioning, electronic stability program (ESP), Internal vehicle no.: G170475 German vehicle Available immediately at our premises in Kaufungen - Kassel More information from: Dirk Bruchhäuser Nsdow Egwyspfx Aa Ijlh *Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors excepted We are happy to accept your used vehicle as trade-in. Financing available directly at our premises. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 27,640 h, load capacity: 12,000 kg, Empty Container Reach Stacker Condition: Ready for use and fully functional Technical Condition: Normal Front Tires: 14.00-24 Rear Tires: 14.00-24 Nljdpfx Aajw Uaqke Ioh

Condition: used, TECHNICAL DETAILS Njdjuhbuuspfx Aa Islh - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench

Condition: used, Year of construction: 2003, operating hours: 20,500 h, load capacity: 45,000 kg, lifting height: 16,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available, location is between Munich and Nuremberg Inspection and collection in the Munich area All inspections have been carried out, good condition Engine: Volvo 174 kW Price: €79,000 Viewing by appointment only Nlsdpfx Aewh Hagea Ish F 365 Ferrari Width front: 4,250 mm Width rear: 3,360 mm Chassis length: 8,600 mm Overall height: 4,700 mm Chassis height: 3,660 mm (A-frame) Weight: 65,600 kg; 9,500 kg spreader; 8,500 kg mast Chassis weight: 47,600 kg Transport mass/weight

Condition: used, mileage: 73,143 km, power: 221 kW (300.48 HP), fuel type: gasoline, gearing type: mechanical, first registration: 01/1966, next inspection (TÜV): 07/2024, color: silver, number of seats: 4, Good, well-maintained condition! Nlodpfx Aaovnn Nde Ieh Tractable history (Massini Report 2022). For further information please call or 04282570 Email: Thank you very much!

Condition: used, functionality: fully functional, machine/vehicle number: A26016, Year of construction: 2007, operating hours: 16,900 h, load capacity: 45,000 kg, lifting height: 16,060 mm, fuel type: diesel, mast type: telescopic, construction height: 4,910 mm, power: 257 kW (349.42 HP), empty load weight: 78,200 kg, drive type: Diesel, Full container reachstacker Chassis number: A26016 Mast type: Telescopic Transmission: torque converter Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Njdpfjuh A Iiox Aa Iolh Front tires Size: 18.00-33 Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Size: 18.00-33 Rear tires Condition: 80 - 100% Sideshift, 20/40 hydr. spreader Full cab,

Condition: used, functionality: fully functional, machine/vehicle number: A26023, Year of construction: 1999, operating hours: 4,850 h, load capacity: 42,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 175 kW (237.93 HP), empty load weight: 69,500 kg, drive type: Diesel, Full-container reachstacker Chassis number: A26023 Transmission: Clark 32000 Condition: Ready for operation and fully functional Technical condition: good Njdpfx Aajw Ai A Hj Ijlh Front tire type: pneumatic Rear tire type: pneumatic Description:

Condition: used, Year of construction: 1996, operating hours: 20,700 h, load capacity: 41,000 kg, lifting height: 15,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available. Location is between Munich and Nuremberg. Viewing by appointment and collection near Munich. All inspections have been carried out, in good condition. Nedpfewh Haajx Aa Islh New Mercedes engine, 222 kW, 302 PS, 302 hours, total 1150 h. Price: €69,000 Viewing strictly by appointment. F 198 Ferrari Width front: 4,250 mm Width rear: 3,360 mm Chassis length: 8,800 mm Total height: 4,570 mm Chassis height: 3,350 mm (A? block) Total weight: 66,800 kg – 9,500 kg spreader? 8,500 kg mast

Condition: used, mileage: 45,369 km, power: 235 kW (319.51 HP), gearing type: mechanical, first registration: 07/1994, color: black, number of seats: 2, Equipment: ABS, air conditioning, central locking, ABS, central locking, electric windows, electric exterior mirrors, fog lights. Very nice, untampered with original condition! New timing belt + service, high-gloss rims. New TÜV, H-license plate possible. Nledpfsvnnl Sox Aa Ish If you have any questions, please email.

Condition: used, machine/vehicle number: A26610, Year of construction: 2006, operating hours: 24,000 h, load capacity: 25,000 kg, construction height: 2,900 mm, power: 156 kW (212.10 HP), drive type: Diesel, Terminal tractor Chassis number: A26610 Transmission: Allison MD3060 Condition: Ready for use and fully functional Technical condition: good Nlodpfeuh A Ayex Aa Ieh Front tires type: Pneumatic Front tires size: 11.00-R20 Rear tires Type: Air Rear tires Size: 11.00-R20 Description: In addition to this FABRICAT MODEL, we also have approx. 150 heavy-duty forklifts, container stackers, reach stackers, forklift trucks & terminal tractors in our Oldenburg warehouse. Visit our homepage - hinrichs-Forklifts. Leasing, installment plan & financing at fair conditions are possible for us at any time. We are also happy to buy your used vehicle free of charge, even without you purchasing a vehicle from us. Give me a call Marco Levermann, I will be happy to advise you in detail about this FABRICAT MODEL. By the way: Our specialist forklift workshop specializes in the repair and overhaul of large trucks from 8 tons upwards. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 20,150 h, load capacity: 12,000 kg, lifting height: 15,540 mm, fuel type: diesel, mast type: telescopic, construction height: 4,130 mm, power: 172 kW (233.85 HP), empty load weight: 41,700 kg, drive type: Diesel, Empty container reachstacker Mast type: Telescopic Gearbox: Dana Clark 13,5HR32412-632 Nledpfxsuh A N Ho Aa Ioh Technical condition: good Front tires type: Air Front tires Size: 14.00-24 Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Size: 14.00-24 Rear tires Condition: 0 - 20% Sideshift, Rear working lights, front working lights, heating, air conditioning, Central lubrication, rear camera