Used Forest Technology for sale (25,739)

Condition: ready for operation (used), Trumpf 1488573 control SW V 6.2 / HW Index C1 SN:00569, used, normal signs of use, 100% functional, scope of delivery as per photos Djdpfx Ajzziiueptskt

Condition: ready for operation (used), Siemens Sinumerik 6FC5147-0AA14-0AA2 flat operator panel without power supply, used, in good condition, 100% functional, scope of delivery as per photos Dksdpfx Apszzhyfjtet

Condition: ready for operation (used), Siemens Simatic S5 CP580 6ES5580-3UA12 module, version 1, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dksdpjzzhvajfx Aptot

Condition: ready for operation (used), Siemens Simatic IPC627C / 6ES7647-6CB00-1AA0 industrial box PC, serial number: SVPC7851972, used, in good condition, fully functional, scope of delivery as shown in photos. Djdpfxezzhu Ae Aptskt

Condition: ready for operation (used), Tool changer unit, 12 stations, for Manforts RNC 600 E machine, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Djdpfjzziu Rox Aptskt

Condition: ready for operation (used), Yamazaki / Mazak MV4- Servo Drive 200W, used, normal signs of use, 100% functional, scope of delivery as per photos Dkodszziwfjpfx Aptst

Condition: ready for operation (used), Siemens CPU315T-2 DP 6ES7315-6TH13-0AB0 Simatic S7 E-Version 1, factory-refurbished by Siemens as per orange label, scope of delivery as shown in photos. Dodpfx Apszzhr Ietjkt

Condition: ready for operation (used), zentro-elektrik 8610-1 power supply SN:100611, used, normal signs of use, 100% functional, scope of delivery as per photos Dsdpfx Apezzixvjtekt

Condition: ready for operation (used), Tox Pressotechnik STE 601-007-001 / EPMK 100.101.600.001 screw jack – overall length: 128 cm, used, good condition, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Dodpfozzig Hox Aptokt

Condition: ready for operation (used), Siemens D300/90 6RA2968-5DV01-7HA1 E/R unit, serial number: Q6/593569, used, in good condition, fully functional, delivery as per photos. Dodpjzzhr Uofx Aptokt

Condition: ready for operation (used), Siemens Simatic S5-155U 6ES5948-3UA22 CPU948 Version 1 SN 73755, used, in good condition, 100% functional, scope of delivery as shown in photos. Dkodpfx Aozzhvmeptjt

Condition: ready for operation (used), Siemens Simatic S5-155U 6ES5948-3UA22 CPU948 version 1 SN 73756, used, in good condition, 100% functional, delivery as per photos Djdpfozzhvtex Aptjkt

Condition: good (used), Year of construction: 2019, operating hours: 1,90,711 h, functionality: fully functional, type of input current: three-phase, total width: 2,500 mm, total length: 3,300 mm, total height: 2,000 mm, compressed air connection: 6 bar, filling weight (min.): 400 g, Equipment: documentation/manual, Filling machine for liquid or semi-viscous products, suitable for filling Doypack pouches. In its current configuration, it has been used for filling 200g containers. The machine is equipped with a lid mounting and sealing unit. Further information available upon request. Dedpfx Apoza Aimotjkt

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical Specification Travel distances X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of Z-axis slide: 360 x 360 mm Portal clearance: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross-section of the slide: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Infinitely variable feed rate in X, Y, and Z: 10,000 mm/min Thrust force per axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° indexing, with spindle SK50 Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system - 1 pallet shuttle with 2 storage stations - 1 manual pallet transfer system between machine and shuttle - 2 workpiece carrier pallets: 5,000 x 2,500 mm Dkodpfx Aetix S Neptet Tool changer Chain magazine: 80 positions Pitch between chain pockets: 130 mm Diameter of consecutive tools: 125 mm Max. tool diameter: 200 mm Max. tool length: 400 mm Max. tool weight: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling systems: - Cooling via adjustable nozzles - ICS / coolant through spindle center, 3,000 l tank, Capacity: 30 l/min, pressure: 7 bar at the tool 2 x chip conveyors Portal enclosure Touch probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnostics Tool management and wear monitoring Documentation: 2 copies (German / French) CE marking Very well maintained, continuously serviced condition!

Condition: used, Year of construction: 2014, overall weight: 580 kg, load capacity: 80 kg, input voltage: 400 V, type of input current: three-phase, We are offering this used Jaskawa Motoman MS80W industrial robot, manufactured in 2014. Model: MOTOMAN-MS80W Type: YRMS0080W-B00 Date: 2014.01 Payload: 80 kg Weight: 580 kg Serial number: S30057-1-2 Order number: S30057-1-2 Maximum pneumatic pressure: 490 kPa Supply voltage: 400 V Number of phases: 3-phase Frequency: 50/60 Hz Average power consumption: 4.0 kVA Dkodpszra R Dofx Aptjt If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Dkjdpfx Aezim A Isptet Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system Dsdozdl Sdepfx Aptjkt CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: ready for operation (used), Siemens SIMODRIVE 650 AC-HSA transistor pulse converter 6SC6508-4AA01 – without cards, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Dsdpfx Aozzhv Tjptokt

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase Dksdpfxjzwfppo Aptet With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Spindle with Röhm OVS 130 552-493 full-stroke cylinder for Monforts RNC 600E machine, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Dkodpozzh Ucofx Aptet

Condition: ready for operation (used), TOX Pressotechnik power pack ES250.100.395.43 / KT 04.0113 No.: 361769.1 No.: 204919.300 Pneumo-hydraulic unit with TOX 223023 valve, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dkedpfx Apszzigtstjt

Condition: ready for operation (used), Telemecanique / Schneider ATV58FHD16N4 frequency inverter SN, used, in good condition, 100% fully functional, scope of delivery as per photos. Dkjdezzid Sopfx Aptjt

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Dkodpfx Apszzh Ipstst

Condition: ready for operation (used), Siemens Simodrive 6SC6100-0GC08 462 010.9062.08 power supply, used, in good condition, 100% fully functional, scope of delivery as per photos. Dkedszzhwdopfx Aptet

Condition: used, Year of construction: 2005, machine/vehicle number: 55501133, This ABB spot welding cell is being auctioned off online in our industrial auction / machine auction follow-up auction, J&S GmbH Automotive Technology - Machine Park. You can find this and many other items on our platform. Djdpfxozyfz Rs Aptskt