Used Hand Lever Valve for sale (14,420)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Ksdpjwc Rk Esfx Ahhedr Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked chassis manufacturer: NIKO Max. speed: 4.8 km/h forwards, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power generation integrated into the chassis, making stand-alone operation possible even without the box body (decontamination module), 230/400 V power supply Generator manufacturer: GTS, 400/230 V, At 400 V = 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V = 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering Hydrostatic drive Electric starter Hand winch Headlights Folding driver’s platform Parking brake Chassis operating voltage: 24 V Decontamination module 4 (box body): Kärcher HY 10/8; equipment: TEP90, fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Box body can be tilted and removed using spring bolts and 380 V plug The vehicle was intended for the Bundeswehr to decontaminate vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip body, flatbed, etc. Operating hours as per display Kdjdpfxox Edcko Ahhjr Vehicle preferably sold to commercial users or for export, private sale conditional. Sold without warranty. Net price for export Net: 6,800 EUR + (19% VAT) 1,292 EUR = Gross: 8,092 EUR The above information is non-binding; errors, changes, and prior sale reserved! Export license required. Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked Undercarriage Manufacturer: NIKO Max. speed: 4.8 km/h forward, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 Air-cooled Four-stroke Diesel Engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power supply, installed within the undercarriage, making autonomous operation possible even without the body structure (decontamination module); 230/400 V Generator Manufacturer: GTS, 400/230 V At 400 V: 6.4–8 kW; 11.6 A; 8 KVA At 230 V: 4–5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering movements Hydrostatic drive Electric starter Hand-operated cable winch Headlights Foldable driving platform Parking brake Operating voltage undercarriage: 24 V Decontamination Module 4 (enclosed body): Kärcher HY 10/8; Equipment: TEP90, Fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Body structure tiltable and removable by spring bolts and 380 V plug The vehicle was intended for the German Armed Forces (Bundeswehr) for decontaminating vehicle interiors. It was only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Additional attachments possible: stake body frame, tipper body, flatbed, etc. Indicated operating hours as per display. Vehicle preferably sold to businesses or for export; private sales subject to reservation. Sale without warranty. Kedox Edb Hepfx Ahhedr Net price for export: Net: €6,800 + (19% VAT) €1,292 = Gross: €8,092 The above information is non-binding. Errors, changes and prior sale reserved. Export license required. Tel: 08026/2188

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 500 kg, temperature: 250 °C, heating capacity: 105 kW (142.76 HP), air demand: 7,000 m³/h, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, Equipment: lighting, Compact powder coating system (complete system) – booth, curing oven, conveying system & Gema technology Complete system for manual powder coating of parts up to 3,000 mm in length and 500 kg payload per carrier. First-class brand-name components (Gema, Siemens, Schneider Electric, Donaldson, Riello), including installation, commissioning and operator training. Overview & Concept For sale is a brand-new, manual powder coating complete system for workpieces up to 3.0 m in length. The system combines an efficient extraction coating booth, a powerful gas curing oven, and a flexible rail conveying system including steel structure (individual design/planning of a powder coating system possible upon request!). 1. Powder coating booth (double-sided manual coating) - External dimensions (L x W x H): 3,400 x 1,100 x 2,150 [mm] - Workpiece opening dimensions: 500 x 1,600 [mm] - Extraction & filter: 2x radial fans at 4,500 m³/h (ATEX version, 3 kW each); 2 filter units with a total of 6 antistatic Teflon filters (Donaldson, 325 x 660 [mm]) - Cleaning: Automatic/manual compressed air pulse cleaning (6 valves) - Safety/equipment: ATEX-compliant internal lighting, sound insulation in the fan area, control via Siemens/Schneider wall control cabinet Electrostatic powder coating technology (Gema) (other manufacturers can also be supplied upon request) - 2x hand guns: Gema OptiSelect Pro with PowerBoost® technology, ATEX-certified - 2x control units: Gema OptiStar 4.0 CG20 with DVC and PCC precision current control, 250 memory programs, app connectivity - 2x injectors: Gema OptiFlow IG07 with quick-release & non-stick cartridge Convection curing oven (chamber oven with double door) - Internal dimensions (L x W x H): 3,500 x 2,000 x 2,300 [mm] - Max. temperature / operating temperature: up to 250°C / 180 - 200°C - Heating: Indirect thermo block with Riello/Ecoflam burner (approx. 105 kW (90,000 kcal/h)) - Fuel: Natural gas or liquefied gas (LPG) (other energy supply e.g. electricity possible upon request) - Recirculation: 2 x 3,500 m³/h recirculation fans (plus automatic fan exhaust fan) - Insulation: 150mm rock wool insulation Manual conveying system including steel structure Load capacity: Max. 500 kg per carrier Equipment: 5 oven rails, 15 carriers (3m each), 3 transverse transfer trolleys Running trolleys: Equipped with high-temperature resistant bearings Scope of supply & services / Commercial points Included in the price: - Booth with extraction & filter unit - 2x Gema powder coating units - Curing oven including thermo block & burner - Conveying system including steel structure & trolleys - Installation, commissioning & operator training on site Kdjdpszu Imrjfx Ahhjr

Condition: new, fuel type: diesel, color: white, gearing type: automatic, Year of construction: 2025, Equipment: all wheel drive, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ KRÜGER Hose Dumper on HINOWA Crawler Chassis (Diesel) NEW High-pressure hose reel ? 200 m DN25 Designed for 200 m DN25 rubber hose (high-pressure hose included) * hydraulically driven * infinitely variable adjustment of flushing hose speed * manual freewheel * automatic hose guide with traversing spindle * double roller window 1? * high-pressure water gauge * hydraulic system Operation – Hydraulic hand levers Support blade up / down * Flushing hose up / down * Flushing hose speed slow / fast Hydraulic equipment Control valves Kedpfxsya S Ils Ahhodr Chassis / Carrier Vehicle Make: Hinowa / Type: Crawler Chassis HS701 Standard – White For further details and/or pictures, please contact us directly. A wide selection of additional vehicles for SALE or RENT can be found at: Modifications, prior sale and errors excepted. The buyer is obliged to independently verify the condition and features of the goods. Sale is subject exclusively to our terms and conditions and without any warranty.

Condition: like new (used), Year of construction: 2026, pressing force: 20 t, For sale is a C-frame assembly and small-series production press from the manufacturer DURENDUS with a maximum pressing force of 20 tons. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for assembly work, small-series production, pressing operations, and straightening processes in industrial applications. ##### Technical data + information: C-frame assembly and small-series production press – 20 tons – 700 × 920 mm ==== General information - Design: C-frame / single-column press - Manufacturer: DURENDUS - Pressing force: 5–20 tons (adjustable) - Maximum installation height: 550 mm - Table size: 700 × 920 mm - Press head: Ø 100 mm - Table height above the ground: 1,000 mm - Overall dimensions (W x D x H): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or according to customer requirements - Forklift pockets: available - Press area lighting: available ==== Hydraulic cylinder - Stroke: 0–400 mm (adjustable) - Cylinder diameter: Ø 110 mm - Piston rod diameter: Ø 65 mm Kdjdpfxey Sx Uwo Ahhsr - Maximum working pressure: 280 bar - Return speed: 50 mm/s - Working speed: 10 mm/s - Idle speed: 10 mm/s - Pressure build-up time: max. 2 sec. (steel on steel) ==== Hydraulics & drive - Hydraulic pump: ASC - Delivery rate: 24 l/min - Motor power: 3 kW - Pressure accuracy: ±5 bar - Tank volume: 60 l - Valve technology: DUPLOMATIC - Filter technology: FILTREC - Oil level monitoring: electronic - Cooling: oil-air cooling - Hydraulic unit: mounted at the top rear ==== Control system - Operation: foot pedal or hand lever - Pressure setting: via rotary control - Stroke limitation: via adjustable sensors - Selector switch: foot / hand operation - Switch cabinet components: mostly SIEMENS ==== Safety - Emergency stop switch - Stroke limitation - Stable steel construction - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 3 kW - Total connection power: max. 5 kW ##### Application areas: Assembly work, small-series production, pressing, straightening, toolmaking, fixture construction, metalworking, maintenance, workshop operations, service applications (Hydraulic press, C-frame press, single-column press, assembly press, small-series production press, workshop press, 20-ton press, pressing press, straightening press, industrial press, C-frame press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they meet all aspects of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 100 t, Single-Column Press – 100 t – C-Frame – 700 × 750 mm – Hydraulic Press For sale is a hydraulic single-column press (C-frame) with a pressing force of 100 t. The machine features a table size of 700 × 750 mm, a maximum daylight opening of 550 mm, and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly, and forming tasks in industrial production environments. ==== Technical Data & Information: Hydraulic Single-Column Press – C-Frame – 100 t ==== General Information - Design: Single-column press / C-frame - Pressing force: 100 t - Table size: 700 × 750 mm - Max. distance ram – table: 550 mm - Working height: 1,000 mm - Overall dimensions (W × D × H): 1,200 × 1,150 × 2,550 mm - Total weight: approx. 5,800 kg - Frame: Welded steel construction - T-slots / boreholes: DIN 650 / 22 mm ==== Hydraulic Cylinder - Stroke: 400 mm - Piston rod: Ø 80 mm - Cylinder: Ø 140 mm - Max. working pressure: 270 bar - Interchangeable press head: Ø 100 mm Kodpoytql Aofx Ahhedr ==== Hydraulic Power Unit - Return speed: 14 mm/sec - Working speed: 9 mm/sec - Hydraulic pump: ASC - Flow rate: 19 l/min - Motor power: 7.5 kW - Oil tank capacity: approx. 70 l - Hydraulic manifold / valves: Duplomatic - Pressure display: Manometer - Pressure adjustment: adjustable - Sensors: limit sensor and pressure switch - Cooling: air cooling - Hydraulic power unit: mounted on top of the press ==== Electrical Equipment - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 7.5 kW - Total connected load: approx. 10 kW ==== Control Cabinet - Protection rating: IP54 - Reserve space: 30 % - Cooling: available - Interior lighting: available - Operating mode selector: lockable ==== Operation - Manual operation via hand-lever valve - Foot pedal control - Pressure adjustment via pressure relief valve - Manometer display - Emergency stop on control panel ===== Assembly work, forming processes, straightening operations, pressing operations, industrial manufacturing Hydraulic press, single-column press, C-frame press, workshop press, assembly press, straightening press, industrial press, production press

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Kdodpfxsxbgrgs Ahhor Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2026, machine/vehicle number: -, functionality: fully functional, pressing force: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press by Hidrobrasil, offering a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured at short notice, and individually customized. It is ideal for straightening, assembly, pressing-in, and pushing-out operations. ==== Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Max. opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm Kdedpfeyia D Rex Ahhsr ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Versions: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank capacity: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: manometer - Pressure adjustment: adjustable - Pressure switch: included - Power unit: side-mounted ==== Operation - Hand lever operation - Sensitive speed control - Pressure setting via rotary knob ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Operating mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Equipment and Features - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table versions available - Construction can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ==== Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insert press, frame press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses surpass Canadian and European safety requirements by fully complying with the national Brazilian safety directive NR 12, which builds upon these standards. Our major strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station Kdodpexayl Dofx Ahher + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: excellent (used), Year of construction: 1994, power: 5.5 kW (7.48 HP), SPINDLE MOULDER GRIGGIO T270 WITH 2-POSITION TENONING SLIDING TABLE RIGHT-HAND SIDE EXTENSION ADJUSTABLE FRONT SUPPORT BAR ADJUSTABLE SPEED FEEDING DEVICE WITH 4 ROLLERS 40 MM DIAMETER SPINDLE WITH 270 MM USEFUL LENGTH 190 MM USEFUL DEPTH OF TABLE CUP MAXIMUM SIZES OF THE TOOL ALLOWED UNDER THE WORKING TABLE: 320 X 190 MM HANGING CONTROL PANEL WITH ELECTRONIC HEIGHT PROGRAMMER 8 SPINDLE HEIGHT SETTING POSITIONS LOCKING SPINDLE LEVER WORKING TABLE SIZE: 1850 X 730 MM MAXIMUM OPENING OF FRONT ADJUSTABLE SUPPORT BAR: 330 MM WORKING TABLE HEIGHT: 900 MM SPINDLE USEFUL LENGTH: 270 SPINDLE STROKE: 250 MM SPINDLE DIAMETER: 40 MM SPINDLE ROTATION SPEED: 3000-4500-6000-8000-10000 RPM TABLE RING DIAMETER: 115-170-220-270-350 MM MOTOR POWER: 7.5 HP 2-POSITION TENONING SLIDING TABLE – WORKING TABLE SIZE: 900X300 MM TILTING: -60° +60° STROKE: 1300 MM NET WEIGHT: 900 KG Kodpfxjznnx Ie Ahhedr VERY GOOD CONDITION

Condition: used, functionality: fully functional, Brand: Graco - Reference: HFRS63 Stainless steel HFR dosing system with 2:1 ratio and application valve for sealants and adhesives - UPC Code: 00755652143321 Kdsdpewudxtsfx Ahhsr - General industry • Insulated glass • Medical sector • Solar technology • Transportation • Flexible packaging • Composites • General assembly applications Applications: • Batch control • Filling • Encapsulation • Vacuum infusion • Automated assembly applications • Pultrusion - Applicable products: Urethanes, Polysulfides, Epoxy materials, Acrylics, Silicones, Glues - Max flow rate: 1.2L/min - Max working pressure: 172 bar - Max air inlet pressure: 6.9 bar - Mixing ratio: 2:1 - Max fluid temperature: 50°C - Fully refurbished second-hand item - 6-month parts warranty (terms upon request) - Shipping or in-store pickup available

Condition: used, Year of construction: 2018, operating hours: 5,690 h, mileage: 89,600 km, power: 55 kW (74.78 HP), empty load weight: 15,000 kg, Operating hours: 5,690, First registration: 23.02.2018 Carrier vehicle: DB Atego 1324 #WDB96752620163901 Basic equipment VT 651 Exhaust air blower: Control speed variable between 2,400 rpm and 3,500 rpm, suitable for the respective application. Driven by the auxiliary engine via the reduction gearbox and fluid coupling. Gearbox ratio: 1.79:1 Kdsdpfx Ahou Ay Tzsher Disc brushes: Quick-release brush system with infinitely variable speed up to 200 rpm (controlled from the cab). Suction nozzle: Cast aluminum suction nozzle with a 250 mm inlet opening and tool-free adjustment. Sweeping roller: Quick-release brush system with a nominal rotational speed of 160 rpm. Dust suppression system: Spray nozzles for dust suppression at the suction nozzle(s), disc brushes, and at the vehicle front. Pressadrain water expulsion system. Electrical system: 24 volts. All external wiring harness connections rated to automotive standard IP67. Controls: Main control panel centrally mounted in the cab with Johnston Video Monitor (JVM) provides information on a wide range of sweeping functions and allows download of recorded data. Up to four cameras (optional accessories) can also be monitored on the JVM screen. A separate palm-rest control includes controls for main sweeping functions and is mounted on the door side. Superstructure and hood: The superstructure consists of the debris container and the integrated water tank, manufactured from high-performance stainless steel sheet. The hood is lined with frequency-adaptive sound-absorbing material. The water tank is equipped with baffle plates and filled via a hydrant filling port type "A". A dual, dry-run-protected diaphragm pump runs continuously. Watertight rear door with double locking system and drainage function. Two side access doors on the superstructure. Insertable superstructure floor as a transfer port for use as a street washer. Rear discharge chute, double amber beacons at the rear protected by wire cages. Automatic multi-positional body support mechanism and side-mounted storage compartments as standard features. Special features: - Special painting LA1 2603 deep orange - Water recycling - High-pressure washing system - Hand suction hose - Brush tilt adjustment from cab - Manual water valves in cab Optional equipment: - Side underrun protection left - Relocated battery box - TÜV approval - Chassis programming - Tachograph inspection and sealing Location: 54595 Prüm

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Kjdpfx Ahozd Hntjhsdr Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 720 mm, table length: 1,000 mm, drop-through hole in table: 220 mm, ram adjustment: 120 mm, stroke adjustment: 125 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: IMMEDIATELY FROM STOCK GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Body and welded parts will be stress relieved by vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 150 Tons Table-Ram Distance 500 Mm Distance Between Walls 1080 Mm Ram Adjustment 120 Mm Kedovyrywopfx Ahhodr Press Approximate Width 1400 Mm Press Approximate Depth 1900 Mm Press Approximate Height 3000 Mm Table Hole Diameter 220 Mm Table Size 720 / 1000 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 900 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 15 + 0.75 KW Motor Speed 1450 RPM Approximate Weight 12,000 Kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece Kodpex Hfdzofx Ahhjdr -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request! Kodpfoq H Aqxjx Ahhsdr

Condition: used, functionality: fully functional, load capacity: 2,500 kg, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: None Kjdpfx Ahszqxcvshsdr Technical condition: New Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual travel and lift, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Kdedpfjzc N Emex Ahhor Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever Kdsdeu Nz Tispfx Ahhor 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: used, Year of construction: 2013, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,950 mm, fuel type: gas, construction height: 2,714 mm, gearing type: automatic, Equipment: cabin, Linde H 35 T - Series 393 - Full Service Forklift Made in Germany. Good condition, technically sound, and ready for use. Current service completed. 980 hours remaining until next service. UVV inspection completed. Ksdpfx Ahjv Tauvjhsdr 6,012 operating hours Full cab - raised - Super-comfort driver's seat Holder with writing tablet Exterior mirrors Front and roof blinds Heating Air conditioning 2-pedal operation 2 front work lights 1 rear work light 1 Blue Spot light 1 flashing light Standard mast Cross lever joystick operation Lift height: 3,950 mm Overall height: 2,714 mm Free lift: 150 mm Integrated sideshift Forks 1,800 x 125 x 45 mm Forks - other lengths available - 3rd valve / single auxiliary hydraulics SE tires Front tires 70% Rear tires 50% Technical specifications - errors excepted. Sale without warranty.

Condition: excellent (used), Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Arburg Multilift H Side Robot Year of Manufacture: 2013 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1,650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA – touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened – bimetallic Main machine motor – servo motor driven by frequency inverter – for energy savings Kdedezc N Smjpfx Ahher Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Centralized lubrication Automatic mold height adjustment Kistler sensor – mold pressure control The injection molding machine was operated in a so-called “cleaning room”, equipped with additional protective devices against contamination as well as two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y- and B-axis (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 6,680 kg Length/width/height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Kjdpjzc Nwcofx Ahhedr Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2004, Offer 24455 Kedpfxjuv Eygo Ahhsdr Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: used, Year of construction: 2017, machine/vehicle number: LC623, Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSupported cup formats: 100 ml and 200 mlBase material: PET film, 500–700 micronLid materials: Aluminum 40 µm or 12 µm / APET + 12 µm / HSL heat-sealable, peelableProduct contact parts: Stainless steel AISI 316Maximum film width: 390 mm (base), 375 mm (upper)Reel diameters: lower 800 mm, upper 300 mmMain machine weight: approx. 2,500 kgCase sealer model: GEM F470Case erector model: F2000Advanced Automation & Control SystemsThe line features robust automation for consistent cup forming, accurate dosing, and reliable sealing. The TR-ALP 10 employs a time-controlled gravimetric dosing system with 10 control valves for uniform fill volumes. Electrical architecture is industrial-grade with clear protection ratings and safety circuitry.Power supply: 3 x 380 V ACInstalled power: 25 kWCurrent: 40 AFrequency: 50 HzControl voltage: 24 V DCDosing system: time-controlled gravimetric, 10 valvesFilling temperature: 15–25 °CSafety hardware: integrated emergency and safety switching (industrial components)Production Line Integration CapabilitiesEngineered for seamless industrial packaging, the line integrates cup production with end-of-line case handling. A vacuum pick-and-place robot cartoner manages multiple cup sizes, with packing recipes for both 100 ml and 200 ml formats. Automatic case erecting, sealing, and three conveyors enable inline or modular operation in diverse layouts.End-of-line: robot cartoner, case erector F2000, case sealer GEM F470, conveyorsPacking configuration: 30 cups/carton (200 ml: 2 layers 15x2; 100 ml: 3 layers)Format flexibility: 100 ml and 200 ml tooling setsContainers: PET cups; secondary packaging in cartonsMachine Condition & Maint... Kdodpfxey Icp Do Ahhsr