Used Hauler Lt Wide Wall for sale (14,490)

Condition: excellent (used), Catalogue number 7431 TECHNICAL DATA - Max workpiece width: 950mm - Max workpiece height: 150mm Top: - Metal pressure roller - Unit (profiled rubber roller for calibration + pad shoe + metal roller) - Smooth, metal sliding roller Bottom: - Feed belt - Pneumatic oscillation of belts with photocells - Electric table lifting - 2 feed speeds - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Working pressure: 8 bar - Extraction connection diameter: 150mm - Dimensions (L/W/H): 1600x1250x2000mm - Weight: 1109 kg ADVANTAGES – German manufacturing – Additional pad shoe included – Used sander, in very good condition Hedpfx Akoyh H Tvjrel Net price: 23,900 PLN Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Hsdjytdkxspfx Akrjl Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7549 Hodpfx Aoyyyftjkrjl TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made Hedpfx Aksyquzcorel – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller Hodjx S I Nqepfx Akrel - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Hjdpjx Uz Rmjfx Akrel Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7612 Technical specifications: - Max. workpiece width: 1030 mm - Max. workpiece height: 150 mm From above: - Metal pressure roller - Split metal pressure roller - Unit (profiled rubber calibrating roller + pad + metal roller) - Smooth rubber idler roller From below: - Infeed roller - Feed belt - Outfeed idler roller - Pneumatically oscillating belts with photocells - Electric table height adjustment - 2 feed rates - Main motor: 11 kW - Brake - Handwheel for precise sanding height adjustment Hedpfx Akjylbmnsrsl - Feed motor: 0.33 kW - Table lifting motor: 0.12 kW - Operating pressure: 8 bar - Extraction port diameter: 150 mm - Dimensions (L/W/H): 1500 x 1750 x 2000 mm - Weight: 965 kg ADVANTAGES - German made - Original paint - Used sander in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change if there are significant exchange rate fluctuations)

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: Hodpfx Asyz Nq Iekrsl metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100mm - Max. working height: 170mm - 2 units: - Rubber pressure roller Hodpfx Aex S Eb Rekrol 1) Grooved metal calibration roller - Rubber pressure roller 2) Grooved rubber roller + sanding pad + metal roller - Rubber pressure roller - Motor power of unit I and II: 11kW - From below: - 3 metal sliding rollers - Conveyor belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Operating pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES – Not repainted – Italian manufacture – 2 operating units – DTR documentation – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may change with higher exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Hjdpeyh H Aqofx Akrel Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW Hedpfxeyqt Iue Akrsl - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm Hjdpoyz Sfbjfx Akrjl - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height Hedpfx Aey At T Aekrsl - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7773 TECHNICAL DATA Hsdpfx Asykaxmjkrol - max. working width: 900 mm - max. working height: 160 mm - from above: - metal feed roller I unit – grooved rubber calibration roller II unit – 2x metal calibration rollers + pad - from below: - conveyor belt - pneumatic oscillation of belts - electric table lift - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6–8 bar - extraction port diameter: 2x200 mm - dimensions (LxWxH): 1850x1950x2040 mm - weight: approx. 3000 kg ADVANTAGES - Italian production - calibration sander + pad - used sander, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on 4.2 EUR exchange rate (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES Hsdpfeyyygdjx Akrol – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: Hsdpsyz Rf Hefx Akrel - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm Hodpey Drn Ujfx Akrjl - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA Hsdpfx Akjx Rqr Sorjl - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm Hodpfx Aoyz Rtqskrsl - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: Hedpfx Aoy Ddp Dekrjl - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 2,793 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 3,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFT WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4500 – DUPLEX 4000mm – WIDE FORK POSITIONER – 2014 – 2793 H – DIESEL – 3150mm – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Consulting | Own transport | After-sales care 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. Our machines are fully inspected, serviced and ready to work — a true guarantee of reliability and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection (service, testing, oil & filter change, component regeneration) 🧾 UDT inspection available 🎨 Own paint & service workshop – perfect look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery 🛠️ After-sales support – we stay with you after purchase Hedjy H E Duspfx Akrol 🤝 Financing with top leasing companies 📄 Invoice in EUR or PLN 🏷️ IN OFFER COMBILIFT C4500 – Four-way / Multi-directional forklift 📆 Year: 2014 | ⏱️ 2793 h | ⚙️ Diesel | 💪 4500 kg 🎯 Mast: Duplex 4000 mm | 🔧 Forks: 1300 mm | Positioner: 3150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 1550 mm Dimensions: Height 2400 mm | Length 2500 mm | Width 2600 mm | Positioner width 3100 mm | Structural height 2800 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel, and pipe industries | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,567 h, load capacity: 2,500 kg, lifting height: 4,600 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, motor manufacturer: Volkswagen, fork length: 850 mm, overall weight: 4,800 kg, empty load weight: 4,900 kg, total height: 2,830 mm, total length: 2,020 mm, total width: 2,270 mm, Equipment: CE marking, adjustable boom, cabin, pallet forks, Very good condition Hodey Av Tlepfx Akrsl Wide fork positioner We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,567 h, load capacity: 2,500 kg, lifting height: 4,600 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, motor manufacturer: Volkswagen, fork length: 850 mm, overall weight: 4,800 kg, empty load weight: 4,900 kg, total height: 2,830 mm, total length: 2,020 mm, total width: 2,270 mm, Equipment: CE marking, adjustable boom, cabin, pallet forks, Very good condition Wide fork positioner Hjdpfx Aey Hkgzskrol We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and Fine Sanding Automatic, Kundig Brilliant Wide Belt Sander with electronic segmented sanding pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be provided on request. Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic sectional pressure bar Edge segments can be individually activated/deactivated Segment width of the pressure bar: 22mm (ideal for lacquer intermediate sanding) Pneumatically adjustable calibration roller, grooved rubber-coated roller with grain compensation Drive motor: 11kW Infinitely variable belt speed: 3 - 15 m/s via frequency converter Hedpeyxg N Nefx Akrol Feed belt infinitely adjustable from approx. 3 to 15 m/min Workpiece-controlled belt blow-off device Constant table height approx. 950mm by adjusting the upper part of the machine, thus integrable into sanding lines Feed belt remains very grippy and is in excellent condition Carpet with adjustable vacuum fan allows safe holding of small workpieces Maximum sanding width approx. 1100mm Workpiece height approx. 3.5 to 200mm Abrasive belt dimensions: 1120 x 2000mm Infeed and outfeed roller tables Hood lock Extraction connections: 1 x 180mm, 1 x 125mm Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt blow-off nozzle, vacuum fan, calibration roller adjustment, and parameters of the segmented sanding pad. Thickness measurement system with adjustable material removal and Enormatic automatic thickness setting with feed release, making constant caliper measurement unnecessary. Programs for different sanding tasks are storable and selectable via smartselect. CE mark Operating manual 2 sanding inserts available The four bellows have been replaced Supplied without the mains connection cable shown Original paintwork, only minor touch-ups Very good condition from a small workshop Machine has approx. 1,395 operating hours, or about 2 hours per week Dimensions approx. 1900 x 1650 x 2150mm (LxWxH) Weight approx. 2,300kg With large mobile storage table at belt height for storing sanding belts Table size approx. 1520 x 1360 x 950mm Includes various sanding belts from K80 to K400 The machine can be demonstrated on site by appointment. We only offer machines that are immediately operational and ready for demonstration at our warehouse. See 'Other Offers from this Supplier.'

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,540 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, motor model: V2403-T, Equipment: CE marking, adjustable boom, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🎨 In-house service & paint shop | 📊 Professional consulting | 🚚 Own transport fleet | 🤝 After-sales support Looking for a forklift you can trust? We are a reputable dealer of new and used forklifts with longstanding experience. Serving clients across Europe, we cater to small businesses as well as large international industrial companies. Our forklifts are more than just machines – they’re a guarantee of smooth and reliable logistics in your operations. ⭐ Why choose us? ✅ Every forklift undergoes a comprehensive technical inspection (full service, testing, filter and oil replacement, refurbishment of key components) ✅ Full UDT certification available upon request ✅ 🎨 In-house paint shop and service workshop – trucks fully reconditioned both technically and visually ✅ 🚚 European-wide transport with our own modern fleet and professional drivers ✅ 👨‍🏫 Operator training provided on delivery + functional testing at your site ✅ 🛡️ After-sales technical service and support – we are at your side even after purchase ✅ 🏭 See and test machines at our headquarters – you are welcome to visit! ✅ 🌍 Hundreds of satisfied customers throughout Europe – join those who trust us already ✅ 💶 Financing support – we cooperate with leading leasing companies ✅ 📑 Invoices issued in EUR or PLN – according to your preference Hjdpfxsy Hla Ne Akrsl 🚜 CURRENTLY AVAILABLE: COMBILIFT C4500 – 4-way forklift 📅 Year: 2018 ⏱️ Operating hours: 5,540 h ⛽ Power: Diesel 📦 Capacity: 4,500 kg 📏 Mast: Duplex – 4,000 mm 🔧 Wide fork positioner 3,100 mm | Forks 1,300 mm 🛞 Superelastic tyres – 100% condition 🟢 Technical condition: Excellent, fully serviced ✨ Visual condition: Very well-maintained, rust-free, ready for operation Dimensions: 📐 Truck height: 2,400 mm 📐 Overall length: 2,500 mm 📐 Width: 2,600 mm 📐 Positioner width: 3,100 mm 📐 Overall height: 2,800 mm 🏆 Ideal for: 📦 Warehouses with narrow aisles 🌲 Wood, steel and pipe industries 📏 Handling long loads 🏭 Both indoor and outdoor operation