Used Heavy Duty Shredder for sale (5,574)

Condition: used, mileage: 1,03,100 km, power: 460 kW (625.43 HP), first registration: 06/2020, fuel type: diesel, empty load weight: 10,696 kg, maximum load weight: 15,304 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,400 mm, fuel: diesel, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, Mercedes-Benz Actros 2663 LS 6X4 Tractor Unit First registration: 06/2020 103,100 km 630 hp engine with 15,569 cc displacement Nedoyzg Rxspfx Akfjcr GigaSpace cab with 2 beds Automatic transmission Retarder Air conditioning, auxiliary heater Adaptive cruise control Lane keeping assist MirrorCam Full spoiler kit Driveline 68,000 kg Weight specification 28,000 kg 6x4 axle configuration Air suspension front and rear Wheelbase: 3,400 mm Tires: 385/65 R22.5 tread 80% Tires: 315/70 R22.5 tread 70% Unladen weight: 10,696 kg The vehicle is first-hand and in well-maintained condition. New technical inspection (TÜV). Export/net price: €85,900 All information without guarantee, subject to error.

Condition: used, mileage: 1,81,300 km, power: 310 kW (421.48 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 9,050 kg, maximum load weight: 16,950 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,350 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, Mercedes-Benz Arocs 2642 LS 6X4 tractor unit First registration: 06/2016 Only 181,300 km with documentation! Short cab Automatic transmission Air conditioning, auxiliary heater Adaptive cruise control Lane departure assistant AP axles Rear air suspension Aerodynamic package Wheelbase: 3,350 mm Tyres 385/65 R22.5, tread approx. 70% Tyres 315/70 R22.5, tread approx. 70% Nodjyzg N Uspfx Akfjcr Unladen weight: 9,050 kg The vehicle is from first owner and in well-maintained condition. Export / net price: 43,900 Euro All information without guarantee, subject to errors and changes.

Condition: used, functionality: fully functional, empty load weight: 1,680 kg, total length: 3,000 mm, construction height: 470 mm, drive type: Keine, tractive force with load: 15,000 N, construction width: 1,680 mm, Heavy duty trailer Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Ncedpou Dzrnsfx Akfjr Front tires size: 265/160-160 Rear tires Type: Superelastic Rear tires Size: 265/160-160 Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, sideloaders & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, empty load weight: 1,345 kg, total length: 2,700 mm, Year of construction: 2018, construction height: 540 mm, load capacity: 6,000 kg, tractive force with load: 6,000 N, construction width: 2,110 mm, Heavy duty trailer Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 18x7-8 non-creeping Rear tires Type: Superelastic Rear tires Size: 18x7-8 non-chalky Ncjdpfx Akeu Dzrujfjr Description: All-wheel steering Non-creep tires,

Condition: used, functionality: fully functional, empty load weight: 1,345 kg, total length: 2,700 mm, Year of construction: 2018, construction height: 540 mm, drive type: Keine, load capacity: 6,000 kg, tractive force with load: 6,000 N, construction width: 2,110 mm, Heavy duty trailer Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 18x7-8 Rear tires Type: Superelastic Ncedeu Dzrzepfx Akfjr Rear tires Size: 18x7-8 Description: All-wheel steering

Condition: used, functionality: fully functional, empty load weight: 1,850 kg, total length: 4,000 mm, Year of construction: 2024, construction height: 710 mm, load capacity: 18,000 kg, tractive force with load: 18,000 N, construction width: 2,000 mm, Heavy duty trailer Condition: Ready for use and fully functional Technical condition: New Njdou Dz Rqjpfx Akfocr Description: All-wheel steering - steering knuckle with adjustable track and steering rods, steering limiting pull at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment and

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 1,92,000 mm, total height: 2,000 mm, shelf height: 2,000 mm, shelf length: 1,92,000 mm, frame height: 2,000 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 32, 16 double-row shelving units, Sendzimir-galvanized, each with 6.03 m length, 2 m height, 0.6 m depth, each with 6 sections, 0.97 m clear width per section, each section with 6 shelves, shelf load capacity 160 kg. - 224 frames (FR20060) pre-assembled, 2000x600 - 1152 shelves (FB097604) 970x600x40 - 96 connectors for double rows (FBDV-Set) - 32 double bracing units (VK2010) - 32 load capacity signs (BSMcP) Frames pre-assembled Ncodpfoyyvq Sex Akfsr Freight / Delivery: - max. 20 business days after receipt of payment - Delivered free to construction/assembly site - Unloading from truck is to be arranged by the buyer with their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, support length: 3,600 mm, shelf length: 11,200 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, 1 row of pallet racking (M45113615-3) 11.2 m long, 4.5 m high, 1.1 m deep, 3 sections, each 3.6 m wide, each with 3 beam levels, compartment load capacity 3,000 kg. - 4 frames (RM4511 - RAL5019) - 8 base plates, spacer material, fastening material - 16 floor anchors (ZZBA1210) - 18 individual beams (T3615 - RAL2008) - 1 load capacity sign (BSMcP) Frames bolted, not pre-assembled Shipping / Delivery: - up to 20 working days after receipt of payment Nedpjv Urchjfx Akfecr - free delivered to construction site / assembly location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany, excluding islands! Deliveries to EU countries by individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 14,200 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 14,100 mm, load per truss pair (max.): 3,050 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45112711-3+) 14.1 m long, 4.5 m high, 1.1 m deep, 5 bays, each 2.7 m wide, 3 beam levels each, shelf load 3050 kg, complete with support grid 1000 kg. - 6 frames (RM3511 - RAL5019) Nedpfjv Unxlex Akfocr - 12 base plates, shims, and screws - 24 ground anchors (ZZBA1210) - 30 single crossbeams (T27114 - RAL2008) - 45 support grids (ZG8811010004) - 1 collision protection / impact protection (ZRS40901) - 1 load-bearing plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, Three-bay pallet rack (M35112711-3) 8.5 m long, 3.5 m high, 1.1 m deep, 3 bays, 2.7 m wide, 2 beam levels each, shelf load 3000 kg. - 4 frames (RM3511 - RAL5019) - 8 base plates, shims, screws - 16 floor anchors (ZZBA1210) - 12 individual beams (T2711 - RAL2008) - 1 load plate (BSMcP) Frame bolted, not pre-assembled Ncsdjv Urrcspfx Akfsr Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / assembly location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, machine/vehicle number: XL9T0N30004415018, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2005, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Rear axle 1: Max. axle load: 9000 kg Ncodpfoyzxr Isx Akfer Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.280 kg Carrying capacity: 38.720 kg GVW: 45.000 kg Registration number: OH-62-ZN

Condition: used, machine/vehicle number: XL9T0N30064415025, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2006, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,100 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 6.300 kg Carrying capacity: 38.700 kg GVW: 45.000 kg Nodpfoyzxrzex Akfscr Identification Registration number: OJ-33-JK

Condition: used, machine/vehicle number: XL9T0N30064415028, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2006, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,110 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles Ncodoyzxruepfx Akfsr - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 30% Weights Empty weight: 6.380 kg Carrying capacity: 38.620 kg GVW: 45.000 kg Identification Registration number: OJ-24-LK

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Nedoywpciopfx Akfecr

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM Nodpfxoh U Rzgs Akfjcr WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, machine/vehicle number: WSJPRS327DTBA9129, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,250 mm, loading space width: 2,450 mm, total length: 13,180 mm, total height: 1,600 mm, color: other, Year of construction: 2013, = Additional options and accessories = - Steering Axle = More information = Axle configuration Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 8.000 kg Carrying capacity: 34.000 kg GVW: 42.000 kg Functional Height of cargo floor: 160 cm Condition General condition: average Technical condition: average Visual appearance: average Identification Registration number: QAQU503 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A Nsdpfx Aoyzt Sijkfecr

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC -Platform: Length 2750 mm, dimensions see photos / technical drawing Ncodpfel Dvtksx Akfer -Load capacity: 1200 kg -Maximum speed: 25 km/h -Number: 2 trailers available -Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

Condition: used, machine/vehicle number: XL9T0N30064415027, axle configuration: 3 axles, first registration: 10/2006, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Ncodpfeyzfcysx Akfsr Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.380 kg Carrying capacity: 38.620 kg GVW: 45.000 kg Registration number: OJ-69-LH

Condition: used, machine/vehicle number: XL9T0N30074415043, axle configuration: 3 axles, first registration: 04/2008, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Ncsdpfeyzfctex Akfsr Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Registration number: OK-32-JP

Condition: used, machine/vehicle number: XL9T0N30074415041, axle configuration: 3 axles, first registration: 10/2007, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Nodsyzfcmspfx Akfocr Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Registration number: OK-08-BF

Condition: used, machine/vehicle number: XL9T0N30074415046, axle configuration: 3 axles, first registration: 10/2008, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Ncedjyzfbcspfx Akfjr Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Registration number: OK-93-SH

Condition: used, machine/vehicle number: XL9T0N30064415026, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2006, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.330 kg Carrying capacity: 38.670 kg Nodpfx Akeyfv Duofscr GVW: 45.000 kg Registration number: OJ-45-JZ

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Njdpfx Akjy Amg Aefocr Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, double turntable steering, heavy-duty trailers -Handover: in the current condition as viewed -Note: Check the condition of the wheels -Heavy-duty transport vehicle: Industrial trailer with 1-axle turntable steering -Platform: 6980/1180/H500 mm -Load capacity: 9 t -Tires: Front 400/75-305 / Rear 525/120-370 solid rubber twin tires -Dimensions total: 8370/1300/H660 mm -Weight: 960 kg Nsdpfx Ajw Dztgekfecr

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Nedpfx Aot Ei Hujkfecr Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...