Used Helical Head for sale (10,165)

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 0872101270802, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser hours: 6,000 h, laser power: 3 W, pipe diameter (max.): 152 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 23 kg, type of cooling: water, overall weight: 23,900 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Model: ADIGE / BLM GROUP LT7 Machine Type: Automatic 3D fiber laser tube/profile cutting machine Laser Source: Fiber laser Laser Power: 3kW Cutting Diameter: Ø12 – Ø152.4 mm 3D Cutting Head: BLM GROUP 3D Tube Cutter Max. Profile/Bar Weight: 23 kg/m Minimum Loadable Length: 1900 mm Max. Loadable Length: 6500 mm Automatic Loading: Yes Bundle Loading: Yes Single Profile/Bar Loading: Yes Max. Bundle Loading Capacity: 5,000 kg Automatic Unloading: Yes Unloading Position: 3 programmable positions Unloading Length: 6500 mm Processable Materials: Carbon steel, stainless steel, aluminum, copper, brass Standard Configuration: 6500 mm loading + 6500 mm unloading Machine Weight: Approximately 23,900 kg (including fume extraction system) Average Power Consumption – O₂: 15 kW Fpsdjzzzb Aopfx Aatel Average Power Consumption – N₂: 20 kW

Condition: ready for operation (used), functionality: fully functional, max working width 500mm max working height 200mm height of side heads 10cm changenable side heads Fedpfx Ajzz Nh Dsatspl 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 20,000 m/min, table load: 1,000 kg, with multi-angle head for efficient and productive 5-sided machining of long parts, such as beams, profiles, tubes, etc. • Max. travel distances: X-axis: 6000 mm working range Y-axis: 800 mm working range Fpodpfxsznlkzj Aatjl Z-axis: 600 mm • Max. load capacity: 1500 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 36 mm in S355 • Thread cutting: M20 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • Limit and reference switches in non-contact design • Spindle overload protection • Robust, precise cross table, generously sized • Safety device combined with light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approximate footprint (L x W x H): 9050 x 3600 x 3150 mm • Total weight: approx. 8 tons • Customer-side connections: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7 Basic • Main computer: MC 355 with 19" FullHD multi-touch screen • Mobile machine control panel with keyboard TE 350 - Tool changer, 24-position - Minimum quantity lubrication and/or coolant system - Chip conveyor including discharge chute Heidenhain options, such as: - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 6 pcs. Mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) - Multi-angle head (moving, automatically interchangeable, controlled rotary axis 360°, lockable every 15°, automatic tool changer, 10-position, angle head length approx. 215 mm, usable length approx. 160 mm, machine-side mounting: SK 40 with 4-point clamping system, hydraulic, tool-side design: BENZ HSK 50 or comparable, translation 1:1, max. speed 3000 rpm, cycle operation, max. torque: 100 Nm, lubrication: grease/continuous, weight approx. 50 kg, minimum quantity lubrication with 1-2 nozzles.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Stürtz horizontal 4-head welding machine for welding plastic components. Fpodpfjzfky Nsx Aatel Welding dimensions: 2600 x 3000 mm Weld bead height limit: 2.0 mm (adjustable to 0.2 mm) Suitable for welding entrance doors. Penetration depth: 6.0 mm Operation via PC Jetter (Dell PC conversion kit)

Condition: used, center height: 210 mm, with tailstock and 3-jaw chuck, 230 mm, center height 210 mm, bore 50 mm. Fpedpfxjzw Uhbo Aatel

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Fedezz A A Ispfx Aatopl Operating and programming manual Inspection while the system is running is welcome.

Condition: used, Year of construction: 1992, In- and outlet on the right side set to 28 MCA 6 heads Capacity: about 10.000 bph amount of capping heads: 6 capacity / hour ca.: 10000 working direction: rotating turret Drive: Treibriemen / variabel Fedpfjzx Aw Hex Aatspl

Condition: used, Year of construction: 2014, Miyano ABX-64THY2 Twin Spindle Fixed Head Stock Lathe with Fanuc Series 31i Model B CNC Control, Triple Turret all 12 Position, Hainback Collet Chucks, 10 Axis Machine, Driven Tooling Capability, Spindle 1 - 40 - 4000rpm, Spindle 2 - 50 - 5000rpm, Max Working Diameter 64mm, IEMCA Master 21 3m Bar Feed, LNS Swarf Conveyor. S/No. CP640028 (2014) 11.350kg. (2) X Right Angle Driven Tooling for Miyano ABX64, (2) x Straight Driven Tooling for Miyano ABX64. Country of Origin: Japan Fedpfx Aajzzbxbetspl Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Fjdpszwt Ndjfx Aatspl Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Fpjdpfx Aozz I N Toatjl Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1995, machine/vehicle number: 0126/95, in very good condition Fpodpfx Ajzx Aufjatsl capacity / hour ca.: 6000 amount of capping heads: 4

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Fedotqu U Tepfx Aatjpl Extrusion machine Trimming machine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 052022-28888-03, overall weight: 2,700 kg, total length: 13,500 mm, load capacity: 5,000 kg, working height: 6,000 mm, Equipment: documentation/manual, Verlinde 5,000 KG single-girder overhead crane in new condition. 2 units available. - Span: 13,227 mm - Lifting capacity: 5,000 KG - Lifting height: 6 m - Year of construction: 2022 Fpodpfxjzbyiae Aatol - Control: radio-controlled Autec - Crane documentation: available Speeds: Crane travel: 2 - 32 m/min. (Frequency controlled) Trolley travel: 5 / 20 m/min. (Relay controlled) Lifting/lowering: 0.80 / 5.00 m/min. (Relay controlled) Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane isn't exactly what you're looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor bars Keywords: overhead crane, bridge crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Maximum cutting length: 3050 mm. Fpsdpfx Aaezlqbaotsl Equipped with a rear finger stop.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 110-014358, total length: 6,000 mm, total width: 2,240 mm, load capacity: 12,500 kg, working height: 6,000 mm, Abus 12,500 KG single-girder overhead crane in very good condition. - Span: 5740 mm center-to-center. Fpedpfxoy Uwubs Aatjl - Lifting capacity: 12,500 KG - Lifting height: 6 m - Year of manufacture: 2011 - Wired control Delivery, customization, installation, inspection, and commissioning are all possible upon consultation. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling cables Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: like new (used), VMK Automatic Heading Machine for Pelagic Fish VMK industrial heading machine for pelagic fish, designed to automate the cutting and removal of fish heads within industrial processing lines for seafood products. The equipment allows for the continuous performance of feeding, positioning, and heading operations, reducing manual handling and facilitating a uniform flow towards subsequent processing stages. Its industrial construction, primarily in stainless steel, is specifically designed for operation in humid and demanding environments typical of fish processing plants. Fedpfx Aoyuffyeatepl MAIN FEATURES -Manufacturer: VMK -Type: Automatic fish heading machine -Application: Pelagic fish -Function: Cutting and removal of the head -Controlled feeding and positioning of the fish -Automatic and continuous processing -Integrated transport system -Multiple feeding channels -Construction primarily in stainless steel -Hygienic design for the food industry -Robust construction for industrial use -Accessibility for cleaning and maintenance -Integrable into existing fish processing lines -Suitable for continuous operation in seafood processing plants APPLICATION The VMK heading machine is designed to be integrated into the preparation area of an industrial processing line for pelagic fish. The fish is fed and guided in a controlled manner towards the cutting area, where the heading operation is performed automatically. Subsequently, the product can continue to the next preparation or processing stages. It can be integrated with: Fish feeding systems Conveyors Sorting and grading machines Cutting and evisceration equipment Filleting machines Fish washers Inspection tables and belts Freezing systems Packaging equipment Complete fish processing lines APPLICATIONS Particularly suitable for canning industries, fish processing plants, and companies specializing in seafood products that need to automate the preparation of pelagic species. It can be used as part of lines designed for the processing of sardines, mackerel, and other species of pelagic fish, depending on the format, product dimensions, and installed configuration. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: Fpedpfx Aaoirmgfstol High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: used, Year of construction: 1984, functionality: unexamined, Citizen Cincom F20 sliding head CNC lathe Year (1984) with Citizen Cincom control and bar feed 2 available Fedpezmadtjfx Aatepl

Condition: good (used), functionality: fully functional, heads set: right/left/top/top spindles span 32mm Fjdpfxjzz N R Ss Aatjpl motors 1,1kW heads with 5 spindles max heads span 2,5m pneumatic clamps regulation of drilling speed

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, spindle diameter: 30 mm, table length: 2,500 mm, Equipment: documentation/manual, a scarcely used PANHANS table milling machine with a swiveling spindle, D=30mm, table extension to the left/right, extendable table support. The condition of the machine is very good. Several milling heads are also included, plus a 3-roller feed mechanism. Fedpfx Aajzzzc Tetjpl

Year of construction: 1994, condition: used, functionality: fully functional, Emmegi Norma 350 TU/4 double-head saw with dust extraction system and spare blades for cutting PVC profiles. Fpjdpfx Aaoza Smnotsl €2,500 (excluding VAT). No delivery; must be picked up at the workshop.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Fjdpow Ixz Ujfx Aatspl Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Fpsdpfx Aajxrg R Rjtel Cutting lenght: 6200mm Blade 500mm

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Fpjdozr Hd Rjpfx Aatjl

Year of construction: 1988, condition: reconditioned (used), Grinder type DURE Cel The grinder is designed for sharpening woodworking tools such as: circular, straight and helical tooth milling cutters; milling heads, circular saws with carbide blades, planer blades; chisels. It is used in vegetable sawmills for woodworking. Dure grinder Technical and operating data Supply voltage: ~3 x 400 V; 50 Hz Largest tool travel of the tool carrier: 660 mm Largest travel of the cross slide: 160 mm Largest horizontal travel of grinding head: 140 mm Rotation of grinding head in horizontal plane: 360° Rotation of the grinding head in the vertical plane: ± 30 ° Largest vertical displacement of the grinding head: 240 mm Spindle speed: 3500 or 6000 min-1 Overall dimensions of the sharpener (L x W x H): 1380x830x1460 mm Weight of the grinder (with accessories): 515 kg Largest diameter of sharpened cutters: 250 mm Largest diameter of sharpened blades: 600 mm Diameter of shanks of sharpened cutters: max. 20 mm Fpodpfxeuuk Dte Aatol Maximum length of sharpened blades: 640 mm Year: 1988