Used High Pressure Water Jet Pump for sale (56)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CDT50 in the trailer version covers a pressure of 230 to 2000 bar with a volume flow of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in trailer version can be configured with numerous options such as hot water boiler, electrically operated hose reel, remote control etc. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm Itjdpohgbkfefx Adwsb CDT50-700 700 bar 25 Lpm CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD50 series of our high pressure machines covers a pressure from 230 to 2000 bar and a volume flow from 7 to 74 l/min. The pump is driven by a 4-cylinder water-cooled Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure long life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. There are 4 rubber feet mounted under the frame. The machine is also equipped with forklift pockets and lifting eyes at all four corners. For protection and storage of, for example, high-pressure hoses, a galvanized roof plate is provided. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl. Water cooled Power of drive motor: 37.3 kW Drive engine speed: 1800 rpm Tank capacity: 90 L Max. Fuel consumption: 10.0 L/h Loudness (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg). Standard accessories included. Itedjhgbf Espfx Adwob

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate Itedpfjhgbgqjx Adwsb CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Tank capacity: 140 L Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop Itsdpfx Ajhf Na Sjdwjb CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11,2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Standard accessories included.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high pressure cleaner. Itodpohf Na Iefx Adwjb This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7,5 kW (50Hz) / 9 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Year of construction: 2020, condition: ready for operation (used), Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available. Iodeucw Tvopfx Adwjtb

Condition: like new (used), Year of construction: 2024, operating hours: 140 h, functionality: fully functional, total width: 1,900 mm, total length: 3,800 mm, total height: 2,000 mm, operating pressure: 2,500 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 1,950 rpm, empty load weight: 2,500 kg, fuel tank capacity: 140 l, noise level: 109 dB, power: 148 kW (201.22 HP), Equipment: type plate available, Den-Jet CDT200-2500 Pressure: 2500 bar Flow rate: 25L Engine power: 200 hp Itsdjxawf Iepfx Adweb A lease purchase is also possible. The full manufacturer's warranty is still available. Contact: +436677994594

Condition: good (used), Year of construction: 2004, table length: 3,000 mm, table width: 4,500 mm, operating pressure: 3,800 bar, warranty duration: 12 months, total length: 4,500 mm, total width: 3,000 mm, water pressure: 3,800 bar, (Pictures in actual condition) Itsdpjgvpu Usfx Adwjb - two to four cutting heads - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - Z-axes can be moved in relation to each other - Z-axes double guided - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Iedpfsxgumcjx Adwetb Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Itodpexgua Aefx Adwjb Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 95521, Water Jet Sweden NCP 4020 D Year of manufacture: 2009 1.1 TECHNICAL DATA 1 x Water Jet Cutting Machine, NC 4020 D Iedpfsw Snybsx Adwstb 1 x FANUC 310iA control unit 1 x IGEMS CAD/CAM software 2 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed units 1 x KMT Jetline, 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit & control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine safety enclosure 1 x PanelOne HMI "EDGECUT" operator interface 1 x Remote control for high-pressure pump 1 x Remote maintenance 2 x Diaphragm pump and extraction units 1 x Waste container, 1000 l 1 x Pressure vessel, 200 l, and 1-ton online abrasive conveyor/online abrasive container 1 x Starter hole drilling unit 1 x MPG, portable manual control unit 1.1.1 MACHINE DATA Table dimensions (W x D): 4200 x 2275 mm - Cutting area (W x D): 3980 x 2010 mm - X-axis travel (2D): 3530 mm - Y-axis travel (2D): 2010 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse X: 30,000 mm/min - Rapid traverse Y: 15,000 mm/min - Rapid traverse Z: 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V + PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€) Itedpfxoi Hckrj Adweb

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Itedpfx Asxp Rcfjdweb

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Iedpsnab Sisfx Adwstb We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available Itsdpfjnab Rzex Adwob - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer! Itodpenab Rlofx Adwob

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced, inspected, and operational after retrofit in 11/2025, Maximator JET certificate Availability: in 4 weeks Year of manufacture (cutting table): 2019 Operating hours (cutting table): 5,900 h • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clear height: 200 mm with Quick UP • TAC12 cutting head, A/B +/- 12° • Automatic height sensing and collision protection • NUM CNC control system • Rittal control cabinet on wheels • Operating PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld control device • Laser positioning system • MJ 100 cutting valve • aJET 3D abrasive head • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container, 1,200 kg, with automatic pressure feed system Itsdpfxjxvqvfo Adwob • High-pressure piping on axes, up to the cutting head • Safety system with light barriers • Water tray with heavy-duty slat support • Edge stops in X and Y • Machine feet: precision wedge mounts • Warranty: 1 year or 1,200 operating hours • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 h, retrofit in 10/2025 with warranty, new pulsation damper with TÜV approval Technical data and prices subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Iedpjxufbtjfx Adwotb Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: used, Year of construction: 2008, functionality: fully functional, grinding width: 635 mm, grinding height: 133 mm, – Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: – Rated power: 5550 W – Actual power: 3700 W = 3.7 kW – Max. sanding width: 635 mm – Max. workpiece thickness: 133 mm – Min. workpiece thickness: 0.8 mm Itjdpfxow Ip Hus Adwob – Min. workpiece length: 230 mm – Sanding rollers: 2 x ø 152 x 635 mm – Height adjustment for the second roller – Speed: 1400 rpm – Sanding belt width: 600 mm – Two feed rates – Machine dimensions (L/W/H): 110 / 110 / 110 cm – Weight: 332 kg

Condition: excellent (used), !!!DEMONSTRATION MACHINE!!! For sale is an as-new JET DDS-237 sanding machine with a maximum sanding width of 940 mm. The machine is in excellent condition and has been refurbished and inspected by our specialist staff. (Fully functional) Technical data: - Double drum sander JET DDS-237 - Motor: 400 V / 7.5 HP Iodpfxox Sqzvo Adwjtb - Sanding drum speed: 1,400 rpm - Feed speed: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: column drill, pillar drill, drilling machine Reference: R-D1618

Condition: used, Used JetPharma Model MC JetMill50 stainless steel mobile jet mill. Process gas maximum pressure 12 bar at 0 to 50 deg.c. Mounted on stainless stand. Itodpjx Tibkefx Adwjb Specifications: Grinding Air Pressure: 174 PSI

Condition: like new (used), Year of construction: 2012, operating hours: 191 h, functionality: fully functional, compressed air connection: 20 bar, pressure: 20 bar, Cold Jet Aero 40 HP This machine is suitable for industrial cleaning, from routine tasks to very large projects. The advantage of this unit is its lack of next-generation electronics, making it straightforward and robust. It is considered one of the most aggressive and effective machines on the market. The machine is in excellent condition. Cold Jet Aero 40 HP Dry Ice Blasting Machine – Complete with the Following Equipment: - COLD JET AERO 40 HP DRY ICE BLASTER (191 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €19,500 This is one of the best machines available worldwide. It contains no electronic control systems, which makes it extremely reliable and reduces maintenance costs. For inquiries or to arrange a viewing, please contact DrDryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines and also supply new Cold Jet models. Contact us for more information. Worldwide shipping available. Relevant keywords: Cold Jet dry ice machine for sale Iodowyk Uxjpfx Adwotb dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine | dry ice blaster | dry ice cleaning Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Itodpfxex A Sfhe Adwob Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit.

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Itedpov Tmxuofx Adwsb Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Sanding belt width: 150 mm table: Pivotable Itedpfxewffpbj Adweb engine power: 1,5 kW Suction nozzle: 100 mm