Used Hitachi Ex 135 W for sale (98)

Condition: used, functionality: fully functional, fuel type: diesel, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Technical condition: New Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Fpjdpsumy Apofx Ap Djn Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, pallet forks

Condition: used, functionality: fully functional, fuel type: diesel, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Technical condition: New Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, Fpedpfsumy Avox Ap Den pallet forks

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 18,000 kg, input voltage: 20,000 V, input frequency: 50 Hz, total height: 4,850 mm, total width: 3,400 mm, total length: 3,600 mm, nominal power (apparent): 11,500 kVA, secondary voltage: 690 V, protection type (IP code): IP23, temperature: 40 °C, Equipment: type plate available, Hitachi Energy RESIBLOC® Cast Resin Transformer – 11.5 MVA – New & Unused For sale is a high-quality Hitachi Energy RESIBLOC® cast resin transformer, which was procured for a project but never put into operation. Since delivery, the transformer has been stored exclusively under professional conditions and is therefore factory-new and unused. Fpjdszkmtpjpfx Ap Don The transformer is ideally suited for applications in power supply, battery storage projects (BESS), industrial plants, data centers, and other energy-intensive infrastructure projects. Technical data * Manufacturer: Hitachi Energy Germany AG * Type: RESIBLOC® Cast Resin Transformer * Condition: New, unused, never in operation * Rated power: 11,500 kVA (11.5 MVA) * Primary voltage: 20 kV (switchable to 10 kV) * Secondary voltage: 690 V * Frequency: 50 Hz * Connection group: Dyn5 * Protection class: IP23 * Cooling: AN (natural air cooling) * Design for outdoor installation * Including busbar system * Total weight: approx. 18,000 kg * Dimensions (L × W × H): 3,600 × 3,400 × 4,850 mm Condition * Factory-new * Never electrically connected * Never put into operation * Stored exclusively * Technical documentation available Inspection possible by arrangement. Assistance with loading and transport can be organized if required.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, inverter, converter, servo drive, drive controller Fpedpfxext Hdas Ap Dsn -Manufacturer: Hitachi, frequency converter inverter -Type: WL200-004SFE -Power: 0.4 kW -Number: 2x inverters available -Price: per piece -Dimensions: 120/70/H130 mm -Weight: 0.7 kg/pc.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 850 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: FANUC, table width: 630 mm, table length: 630 mm, overall weight: 15,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 45,000 W, number of axes: 4, This 4-axis HITACHI SEIKI HS630 was manufactured in 2001. It features a travel of 850 mm on the X-axis, 800 mm on the Y-axis, and 850 mm on the Z-axis. The machine has a table work area of 630 x 630 mm and a maximum pallet load capacity of 1200 kg. If you are looking to get high-quality machining capabilities, consider the HITACHI SEIKI HS630 horizontal machining centre we have for sale. Contact us for further details. Fpedez Dud Topfx Ap Don - Recent Maintenance / Upgrades: Equipped with new linear guides on Y-axis, refurbished ball screw with new bearings- Control System: Seikos Lambda / Fanuc Control- Table Work Area: 630 x 630 mm- Indexing Angle: 1° (360°)- Indexing Method: Absolute, 3-position- Pallet Load Capacity: Max. 1200 kg- Distance Spindle Center to Table Surface: 100 - 900 mm- Distance Spindle Nose to Table Center: 150 - 1000 mm- Spindle Taper: NT50 / NT40- Spindle Speed: 1.0 - 6000 rpm / 100 - 10000 rpm (Fully automatic & stepless)- Smallest Increment: 0.001 mm- Cutting Feedrate: 1 - 20000 mm/min- Jog Feedrate: 5000 mm/min- Rapid Traverse: 45000 mm/min- Spindle Motor (AC 50% ED): 30/45 kW (40/30 HP)- Hydraulic Motor: 2.2 kW (3 HP) - 4P- Lubrication Motor: 17-2 (0.02)-2 W (HP)-P- X-Axis Drive Motor: FANUC MODEL α30- Y-Axis Drive Motor: FANUC MODEL α40F- Z-Axis Drive Motor: FANUC MODEL α30- Table Indexing Motor: 1.0 kW (1.4 HP)- Spindle Cooling Motor: 0.4 kW (0.5 HP) - 4P- ATC Tool Capacity: 40 pieces (Optional 60 / 90 / 120 tools)- Max. Tool Diameter: Ø 125 mm- Max. Tool Length: 500 mm- Max. Tool Weight: 25 kg- Tool Selection Method: Any / Bi-directional via 2- and 4-digit T-Word- APC Exchange Method: Rotary type- Machine Weight: 15000 kg (33000 lbs)- Tool Shank Standard: BT50- Tool Shank Runout Tolerance: Max. 0.025 mm (Positions A & B)- Tool Shank Perpendicularity: 0.015/100 mm relative to plane A

Condition: used, Year of construction: 2009, cooling capacity: 412 kW (560.16 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,550 kg, input voltage: 400 V, total width: 1,900 mm, total length: 5,370 mm, total height: 2,420 mm, AIRCOOLED CHILLER HITACHI RCUE 412 kW Cooling capacity: 412 kW(12/7 — 35°C) Year of manufacture: 2009 Options: with economizer Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Hitachi (screw) Fpsdpfexxwflex Ap Don Number of fans: 12 pcs. Type of refrigerant: R407C Dimensions: 5.37 x 1.90 x 2.42 m. Weight: 3550 kg. Working hours: 29382/21390 h. Evaporator needs to be repaired

Condition: new, functionality: fully functional, Year of construction: 2024, * New machine * Mitas 405/70 R18 tires * 1st auxiliary hydraulic circuit * Hydraulic equipment for 1st auxiliary circuit * Permanently engaged 1st auxiliary circuit * Comfort seat with mechanical suspension * Storage box with lid * Hydraulic quick coupler * Standard bucket and forks Technical specifications: - Operating weight (in kg): 5,410 - Cab: ROPS and FOPS safety cab - Engine power (kW): 55.4 (Stage V) - Bucket capacity (in m³): 1.0 - Max. pump flow rate (in l/min): 3,270 - Bucket pivot point (in mm): 2,400 - Dump height (in mm): 40.0 - Tipping load (straight) (in t): 3.68 Fjdpfx Apewlz H Nj Dspn

Condition: excellent (used), functionality: fully functional, power: 140 kW (190.35 HP), Year of construction: 2021, operating hours: 7,212 h, Equipment: air conditioning, cabin, gripper hydraulics, hammer hydraulics, Hitachi ZX 250LCN-7 Year of manufacture: 2021 Operating hours: 7,212 h CW40 quick coupler Fpedpfxjy U E Hrj Ap Djn with various options For more information, please inquire!!

Year of construction: 1988, condition: used, Two CNC turning centers Hitachi Seiki HITEC-TURN 20SII are available, control: Seiki MULTI, weight: approx. 4.3t, an on-site inspection is possible. Fodpfez I Dcyex Ap Depn

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 12,300 h, HITACHI Hydraulic Excavator type ZX 670 LCH-3 Year of construction: 2011 Hours: 12 300 hours Engine brand: ISUZU Engine power: 345 KW Excavator weight: 67 300 KG Supplied with a bucket in perfect condition. Operating status OK Fpodpfx Apsz Nyd Rj Den

Condition: used, functionality: unexamined, fuel type: diesel, color: orange, overall weight: 34,190 kg, number of seats: 1, mast type: mono, Year of construction: 2010, operating hours: 15,658 h, Equipment: CE marking, air conditioning, cabin, onboard computer, steel tracks, Hitachi ZX350LCN-3 tracked excavator Year: 2010 15,658 hours Used machine More information available on the Almerisan website. Fedpeznwhljfx Ap Depn

Condition: repair required (used), Year of construction: 1995, machine/vehicle number: VM40067E, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, overall weight: 6,000 kg, spindle speed (min.): 8,000 rpm, Brand / Manufacturer: HITACHI Model: SEIKI VM 40 II Year: 1995 Taper: BT40 Serial number: VM40067E Control unit: SEICOS MY II DIMENSIONS Fpsdpfx Apszl S I Uo Dsn Table dimensions: 760 x 400 mm. TRAVEL X-axis traverse: 560 mm. Y-axis traverse: 410 mm. Z-axis traverse: 410 mm. SPINDLE Spindle speed: 8,000 rpm. Spindle power: 5.5 / 7.5 kW. WEIGHT AND DIMENSIONS Machine weight: 6,000 Kg. ACCESSORIES 30-station automatic tool changer / ATC Capacity: 30 Tools Nikken 4th axis CNC rotary table (REQUIRES REPAIR) The machine is complete and includes documentation and manuals. The mechanical part is in good condition. The electronics need repair; likely the power supply. (NEEDS TO BE REPAIRED) The machine is complete. It also has documentation and manuals. The mechanical part is good. The electronics need repair. Probably the power supply.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2026, machine/vehicle number: Hitachi HPV102HW, Rebuilt Hitachi HPV102HW main pump complete with gearbox and pilot pump. Service exchange unit. New parts: - Bearings - Cylinder blocks and valve plates Fsdpfxoyg Ip So Ap Depn - Head cover - Drive shafts - Seal kit Regulators are for Hitachi Zaxis 180W and Zaxis 210W. Also suitable for: Hitachi Zaxis 200, Zaxis 210, Zaxis 250, Zaxis 280 Hitachi EX215, EX255, EX285 Hitachi EX200-5, EX220-5, EX250-5

Condition: ready for operation (used), Hitachi Seiki tool turret, 5-position, Ø 50 cm, mounting plate: 235 x 345 mm, Ø bore for tool holders: 40 mm, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Fpsdpfsi Ea Nmox Ap Dsn

Condition: new, functionality: fully functional, power: 11.5 kW (15.64 HP), fuel type: diesel, fuel tank capacity: 22 l, overall weight: 1,980 kg, operation weight: 1,980 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, operating hours: 2 h, Equipment: additional headlights, adjustable chassis, cabin, gripper hydraulics, hammer hydraulics, rubber tracks, HITACHI ZX19-6 New machine from production year 2025 with approximately 2 operating hours. Engine rated power: 11.5 kW / 15.6 hp Operating weight: 1,980 kg Equipment: - Hydraulic adjustable undercarriage (980 mm - 1,280 mm) - Hydraulic support and grading blade - Mono boom hydraulically adjustable to the side - Hydraulic pilot control joysticks - Two-speed travel drive - ROPS cab incl. heating, front and rear windshield wipers, 12V socket, rearview mirror, cup holder, armrests - 3 x LED work lights - Radio Working equipment: - Stick: 1,080 mm - Boom: 1,700 mm - Mechanical quick coupler incl. lifting hook / Lehnhoff MS01 Warranty/guarantee as per manufacturer’s terms Delivery condition: ex-stock 15345 Altlandsberg / delivery to Berlin and Brandenburg available upon request Interim sale reserved. The sales price is net; VAT can be shown separately. Detailed pictures available on request. Fpedsympxujpfx Ap Dsn Possible attachments (price on request): - Digging bucket 220 mm - Digging bucket 300 mm - Digging bucket 500 mm - Cable bucket - Grading bucket 1,000 mm (rigid) - Hydraulic breaker - Earthwork grapple

Condition: used, Year of construction: 2021, operating hours: 11,213 h, Internal vehicle no.: MK300022 Available immediately at our yard in Kaufungen. More information at: Luis Lucena Viktoria Sologubova Hitachi ZX210LC-6 tracked excavator - 23.1 tonnes - 11,213 operating hours German Hitachi ZX210LC-6 tracked excavator, manufactured in 2021. The machine has an engine output of 128 kW, an operating weight of 23,100 kg and is supplied with a quick coupler and a Kiesel digging bucket. Technical specifications: * Vehicle number: MK300022 * Vehicle condition: Used machine * Category: Tracked excavator * Manufacturer: Hitachi * Model: ZX210LC-6 * Manufacturing date: 04/2021 * Year of manufacture: 2021 * Operating hours: 11,213 hours * Engine power: 128 kW * Operating weight: 23,100 kg * German machine * CE marking present Equipment: * Quick coupler * Enclosed operator's cab * Tracked undercarriage * Hydraulic excavator * Kiesel digging bucket Digging bucket specifications according to the identification plate: * Manufacturer: Kiesel * Type: Digging bucket * Machine class: 23-29 tonnes * Cutting width: 1,000 mm * SAE capacity: 940 liters * Weight: 902 kg * Serial number: 180078 * Manufacturing date: 02/2018 Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: MK * Purchase price: €63,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €1,040.02 * Residual value: €9,380.00 If this offer interests you or you would like to adapt it to your needs, please contact us (Mr. Enchev). Fpsdpfx Apezfc U Eo Den We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing can be arranged directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2021, operating hours: 1,690 h, Hitachi ZX225USLC-6 forestry excavator, year of manufacture: 2021, operating hours: only 1,690 h, includes Vosch grapple saw, includes hydraulic trench cleaner 1,600 mm, air conditioning, camera, OQ65 quick coupler, central lubrication, foldable protective canopy for front and roof, hydraulic protection on the boom, additional weight at the rear, weight: 28,100 kg, engine [128 kW/174 hp], in good condition, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. = Further information = Drive type: wheeled. Please contact Tobias Ebert for further information. Fpedpozqi Shjfx Ap Djn

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 713/714, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller model: FANUC /SEIKOS 18Mi, spindle motor power: 8 W, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, HITACHI SEIKI Vertical Machining Center VS50, 3 axes X Y Z + 4th axis with 360,000 positions. Tool magazine: 20 SK40. Control: Fanuc / Seikos 18Mi. Fodpeyzyc Iofx Ap Djpn

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 9,202 h, Please contact Kristoff Van Havere for more information Fpodpfx Apjzymv Aj Don - Hydraulic quick hitch CW40 - Bucket 1800mm - Auxiliary piping for hammer and sorting grab - Perfect condition

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, color: orange, overall weight: 8,650 kg, chain condition: 100 %, number of seats: 1, mast type: mono, Year of construction: 2019, operating hours: 4,805 h, Equipment: additional headlights, air conditioning, hammer hydraulics, low noise, onboard computer, rubber tracks, Rubber-tracked excavator Hitachi ZX85USB85-6 4,805 hours 1 bucket Front blade Very good overall condition Ready for use. More information on the Almerisan website. Fpedpfjzta Ulox Ap Don

Condition: excellent (used), power: 133 kW (180.83 HP), fuel type: diesel, color: other, number of seats: 1, first registration: 08/2016, Year of construction: 2016, operating hours: 6,868 h, Equipment: air conditioning, = Additional options and accessories = - PTO = Remarks = Fsdpfxszwnnhs Ap Dopn Condition CE type: CE = More information = General information Cab: day Technical information Number of cylinders: 4 Engine capacity: 5.193 cc Track width: 259 cm Empty weight: 26.400 kg Dimensions (LxBxH): 1036 x 319 x 307 cm Functional Maximum reach: 1.001 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good

Condition: used, fuel type: diesel, first registration: 06/2014, Year of construction: 2014, operating hours: 2,900 h, Excavator Hitachi ZX33U-5A CLR – 2,900 operating hours – air conditioning – CW 5 – quick coupler system and auxiliary lines – total weight 3,320 kg – = Further Information = Model year: 2014 Drive: Track Unladen weight: 3,320 kg Please contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Fpedpfx Asw A Thmsp Don

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 580 mm z-travel 580 mm control SEICOS 16M B-axis (table) 360 x 1° mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min turning speed range - stepless 35 - 12.000 Nm spindle drive 22,00 kW max. torque on the spindle 236 tool taper BT40 toolpiece magazine: chain magazine 61 Stück size of pallet 2x 400x400 mm max. workpiece diameter 630 mm workpiece height max. 680 mm workpiece weight max. 400 kg total power requirement 30,00 kW weight of the machine ca. 12,00 t Fodezugf Tjpfx Ap Dspn dimensions of the machine ca. 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.

Condition: used, Year of construction: 2012, Operational condition machines. Ask for specification and details. 2 units available! Fpodpfsywi Apox Ap Don

Condition: used, fuel type: diesel, Year of construction: 2021, operating hours: 2,940 h, Track width: 70 cm Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW40 Fjdpfx Apozymv Ne Dspn - Bucket 1800mm - Auxiliary piping for hammer and sorting grab - 3 piece boom - Central grease system - Cab overpressure filter unit