Used Homogenisator With Container for sale (6,482)

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 5.6 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,216 kg, empty load weight: 784 kg, loading space volume: 7 m³, loading space width: 1,720 mm, loading space length: 3,740 mm, loading space height: 1,500 mm, Price on request. The price applies ex-warehouse 33106 Paderborn! Rsdpfx Aaeyda Hdjzjn Quantity discounts available for the purchase of multiple containers. Leasing/hire purchase options available. 17 units available in stock, RAL 7043 15 units available at short notice, RAL color of your choice Other designs and sizes available from our Paderborn warehouse. You are welcome to check our current stock on our website. Skip containers according to DIN 30720 Technical specifications: • Internal dimensions: 3,485 x 1,720 x 1,500 mm • Usable volume: 7 cbm • Unladen weight: 773 kg • Floor: 6 mm S 235 • Sides: 4 mm S 235 • All sheets and profiles continuously welded • Container inspected and certified according to DGUV 114-010 • Corner reinforcements • Double-sided 3-point tipping bearings (Ø45 bolt) • Stacking bar, L-profile • Securing bar • Frame edges: U 80x50x4 • Interior and exterior zinc phosphate primer, exterior finished with synthetic resin paint (80–100 μ) • Permitted total weight: 10,000 kg Errors and prior sale reserved. Photos for illustrative purposes only! For further questions, please send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 5.6 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,227 kg, empty load weight: 773 kg, loading space volume: 7 m³, loading space width: 1,720 mm, loading space length: 3,485 mm, loading space height: 1,500 mm, Price on request. The price is ex stock 33106 Paderborn! Quantity discounts available for purchase of multiple containers. Leasing/hire-purchase possible. Steel lid - 3 units immediately available in stock, RAL 7043 - 11 units available at short notice, other RAL colours selectable Technical Specifications: • Dimensions: 3740 x 1720 x 1500 mm • Base 5 mm S235 • Sides 3 mm S235 • Steel lid, 1.5 mm S235, can be positioned vertically • Torsion bar spring • All sheets and profiles continuously welded • Container tested and certified according to DGUV Regulation 114-010 • Corner reinforcements • Triple side tilting bearing (pin Ø45) on both sides • Stacking bar L-section • Safety bar • Frame edges U80x50x4 • Zinc phosphate primer inside and out, exterior coated with synthetic resin varnish (80–100 μ) Rsdpfsyda Dpsx Aazsn • Unladen weight 784 kg • Permissible total weight 10,000 kg

Condition: used, tank capacity: 1,023 l, GENERAL Equipment: Venting / Deaeration, Ball valve Design: Container Remarks: Frame Fe (galvanized) Speed: 97 rpm Internal diameter: 1,080 mm Overall height: 1,950 mm Power: 0.75 kW Agitator: Beam agitator Location: Bremen Technical documentation: Drawing, installation declaration in accordance with the EC Machinery Directive, assembly instructions Nameplate: Volume: 1,023 liters Redpfjxqbunjx Aazen Product-contact material: V2A 1.4301 (AISI304) Condition: Factory new Cylindrical height: 1,000 mm TANK Max. permissible operating temperature: 80 °C Base type: Frame EQUIPMENT Manhole / Access hatch: in top head, handhole Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: Bright rolled IIIc AGITATOR Voltage: 400 V Agitator positioning: Centered in top head

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming Rjdpfx Aaox Imqlszen • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: used, axle configuration: 3 axles, first registration: 08/2014, total length: 11,900 mm, total width: 2,550 mm, total height: 1,400 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, ABS, EBS, Superstructure year: 2014, Wheelbase set-up: 2x20 + 1x30 + 1x40 + 1x45, Extendable chassis: Rear, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 11 mm; Tyre tread right: 1 mm Axle 2: Tyre tread left: 13 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 10 mm; Tyre tread right: 4 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used commercial vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? It's simple! • Large, fast-changing stock • Verified quality • Competitive pricing • Professional business conduct • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The assurance of recognised quality • And more.... Please visit our website for special offers and to view our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an enquiry via our website. Ask directly about our European warranty package. Rodpsyfmfpefx Aazen

Condition: used, Year of construction: 2019, Overview  This 40-foot refrigerated container was manufactured in January 2019 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container shows minimal damage and was last serviced in December 2021. The unit works perfectly and the interior is illuminated. The container is easy to clean thanks to the Easy Clean Paint. Technical details  Year of construction: 01/2019 Maximum load capacity: 29,560 kg Tare weight: 4,440 kg Cooling range: -30°C to +30°C Coolant: R 134a Power connection: 32 A heavy current Last maintenance of the cooling system: 12/2021 Interior lighting  Easy cleaning with Easy Clean Paint  Redpfeuwz Hrox Aazen

Condition: used, Year of construction: 2006, Overview This 20-foot refrigerated container was manufactured in 2006 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container was last serviced in November 2024 and works perfectly. The container is easy to clean thanks to the Easy Clean Paint. Technical details  Year of construction: 2006 Maximum load capacity: 30000 kg Cooling range: -30°C to +30°C  Coolant: R 134a  Power connection: 32 A heavy current Last maintenance of the cooling system: 29/08/2024 Easy cleaning  Accessories such as alarm, polar curtains, locks, alu ramp included Rodpevf E Sdsfx Aazen

Condition: good (used), axle configuration: 3 axles, first registration: 03/2018, suspension: air, color: red, Year of construction: 2018, Make axles: BPW Rjdpoxyy S Djfx Aazjn Brakes: disc brakes Suspension: air suspension Empty weight: 3.540 kg Carrying capacity: 35.460 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information ADR : EX II - EX III - FL -AT

Condition: good (used), axle configuration: 3 axles, first registration: 03/2018, suspension: air, color: red, Year of construction: 2018, Make axles: BPW Brakes: disc brakes Suspension: air suspension Rjdjx Dbh Uepfx Aazsn Empty weight: 3.540 kg Carrying capacity: 35.460 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information ADR : EX/II / EX/III / FL / AT

Condition: used, Year of construction: 2022, 2022 | Iveco Daily 35S16H3.0D with Tool Box on both sides | Used Commercial Vehicle - Tipper Rjdpsycmm Ijfx Aazon 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 39 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine malfunction Add Blue Code stored 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39879 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2025, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: Rsdpfoq Nfbhsx Aazon - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process.

Condition: used, Volume: 700L Usable volume: 80-500L Internal diameter: 1100 mm Suitable for vacuum: -1 bar Double jacket: pressure proof + 3 bar Capacity: 18,5 kW with frequency converter Nominal speed: approx. 3000 rpm (with 50Hz) Protection: IP 54 suitable for heating and cooling Stainless steel 316L + Homogeniser Rodpfjyf D E Tex Aazsn

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 34 h, load capacity: 8,000 kg, lifting height: 3,440 mm, free lift: 1,170 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork carriage width: 2,120 mm, fork length: 2,400 mm, empty load weight: 12,500 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,130 mm, Diesel Forklift Load center of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tires type: Superelastic Front tires size: 8.25-15 non-marking Rodpev Ihkhefx Aazjn Rear tires type: Superelastic Rear tires size: 8.25-15 non-marking Description: In addition to this Clark model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, would be happy to advise you in detail about this C80D. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Sideshift, fork positioner, Heating, full cab, full free lift, DPF

Condition: new, color: other, Field of application: Mining We produce, mobile, primary, primary - secondary or tertiary, impact - crushers. On a trailer, with a hopper, belts, grizzly or wooble feeder, to separate clay and earth from the rock. It can also be a combination of crushers + screen, sieve, with two, three or four deck_ DRY PROCEDURE or WET PROCEDURE. The final products are tampons: 0-30 mm, 0-60 mm or 0-100 mm or asphalt-construction fractions; 0/4, 4/8, 8/11, 11/16, 8, / 16, 16/22, 16/32 mm. The plant is used for work in soft and medium hard rock. Technology has advanced, today they can crush impact crushers even in difficult working conditions. On a tertiary impact crusher in difficult working conditions, the impact hammers can be pre-shredded up to 40,000 m3 of gravel or eruptive stone. The power supply of the plant is via a cable, from a transformer station or via a generator. The size of the plant will depend on the project inquiry . ----- ----- ----- Mining crushing plants are offered, on a trailer; jaw crushers, cone crushers, vertical crushers, all types of separations, DRY PROCEDURE and WET PROCEDURE, with washing. ----- ----- ----- The warranty on the plants is 2 years. We provide service, all spare parts. ----- We offer all technical support on the issue of how correct and economically justified work out some quarry !! Rjdjx D Dcbspfx Aazsn Many years of professional experience in surface exploitation in quarries, open pit, of mineral resources.

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, Rsdpfx Aex D A R Djazen • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,000 h, load capacity: 3,000 kg, lifting height: 3,950 mm, free lift: 1,250 mm, fuel type: diesel, mast type: triplex, construction height: 2,100 mm, power: 47 kW (63.90 HP), fork carriage width: 1,600 mm, fork length: 1,200 mm, empty load weight: 5,500 kg, total length: 4,080 mm, drive type: Diesel, construction width: 1,323 mm, Rough Terrain Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Hydrostatic Speed Class: 20 Condition: Ready for operation and fully functional Technical Condition: Good Front Tires Type: Solid rubber (Superelastic) Front Tires Condition: 60 - 80% Rear Tires Type: Solid rubber (Superelastic) Rear Tires Size: 700x12 14PR Continental Redpfxoxtgrwe Aazsn Rear Tires Condition: 60 - 80% Description: The MSI 30 is a versatile mast forklift and unique in its class. It can be used in the wood and paper industry, recycling sector, and various logistics applications, among others. Whether inside industrial buildings, on the yard, or on light terrain, the hydrostatic transmission combined with a powerful engine and two large-diameter drive wheels ensures precise and smooth operation. This machine delivers daily productivity gains. For efficient maneuvering, the MSI 30 features a steering axle with an integrated cylinder, providing a very tight turning radius. Thanks to the wide range of available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It offers a lifting capacity of 3.0 t. Sideshift, 3rd valve, 4th valve, rear work light, front work light, heating, full cab, full free lift,

Condition: new, Year of construction: 2025, NEW CONTAINER / ONE WAY / Year of manufacture 2025 +Lock box +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015 Rodpfx Aaewu Uuxozon

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,866 h, load capacity: 2,500 kg, lifting height: 4,650 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery voltage: 80 V, DGUV certified until: 01/2027, fork length: 1,100 mm, tire condition: 100 %, Equipment: CE marking, UVV, full service history, lighting, sideshift, Linde E 25-01 Electric Forklift with the following specifications: Operating hours: 1,866 Lifting capacity: 2,500 kg Lift height: 4,650 mm Overall height: 2,180 mm Year of manufacture: 2016 LINDE 2.5 ton electric forklift with half-cab, very low hours, good battery, new front and rear tyres, triplex mast with full free lift, side shift, mini levers, one-pedal operation, lighting, fork length 1,100mm, battery charger included. Price ex works, including service according to Linde manufacturer's specifications and valid UVV safety inspection. Viewing, demonstration, and test drive available by appointment via telephone. Rsdjx I D Dpepfx Aazon Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers can be found on our website.

Condition: new, Year of construction: 2024, 20-Foot Container NEW - ONE WAY Rodpeg S Aibjfx Aazjn with lock box and forklift pockets Year of manufacture 2025

Condition: used, tank capacity: 1,500 l, GENERAL Design: Container Remarks: Frame made of V2A/V4A; manway diameter approx. 455 mm; one opening at the cone end, diameter approx. 600 mm (closure for this opening is missing) Overall width: 1,200 mm Overall height: 1,890 mm Overall length: 1,200 mm Redeyclv Iepfx Aazjn Location: Bremen Nameplate: Volume: 1,500 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: pharmaceutical industry TANK Bottom: conical bottom Support type: frame EQUIPMENT Manhole/Dome: in the top head Note: manhole cover is missing

Condition: used, tank capacity: 400 l, GENERAL Equipment: Disc valve Design: Container Remarks: Manufacturer: Bohle; Frame made of stainless steel V2A (dimensions approx. 1200 x 800 mm); 1 longitudinal sight glass in the cylinder; Sampling lances and 1 sieve insert inside the container Inner diameter: 750 mm Total width: 800 mm Total height: 1,850 mm Total length: 1,260 mm Top cover: Removable / Hinged top cover Location: Bremen Volume: 400 liters Wall thickness cylinder: 2.0 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: Used Last application: Pharmaceutical industry CONTAINER Base type: Frame EQUIPMENT Outlet: 150 mm MATERIAL QUALITY Interior surface: High gloss TECHNICAL DATA / DIMENSIONS Redpfeyclvzox Aazjn Bottom wall thickness: 1.9 mm Top cover wall thickness: 1.8 mm

Condition: used, tank capacity: 40 l, GENERAL Design: upright Remarks: Lid opening approx. 220 mm (small cutout in the lid, see photos); slight metallic discoloration inside; without bottom outlet Inner diameter: 350 mm Total height: 560 mm Top: open with loose lid Location: Bremen Volume: 40 liters Cylinder wall thickness: 1.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 360 mm Last use: pharmaceuticals CONTAINER Base type: skirted base EQUIPMENT Outlet: not available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 1.0 mm Rodpfx Aaeycluwszjn Top wall thickness: 1.1 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, operating hours: 33,590 h, load capacity: 16,000 kg, Equipment: adjustable boom, cabin, gripper hydraulics, For sale we offer a powerful Svetruck TMF 12/9 forklift with a net weight of 50 tons and a load capacity according to the specification of 12t (in reality without a problem with a lifting capacity of 20 tons) lifted to a height of up to 7.5 meters. Forklift / Reach Stacker from new with one owner in the Port dealing with unloading and loading of wooden logs onto ships. Svetruck is prepared for transport. It currently has a dismantled gripper (possibility of installation at this price). -====••==== 2 The first photos show the equipment originally assembled! We have the arm and the rest of the equipment. - We also purchased an interchangeable arm from ELME from 2004 thanks to which you can transform this truck into a Reach Stacker lifting sea or land containers. We have the original arm on our yard (scissors for transporting bales as in the first photo) We also have a gripper for full containers ELME Spreader We offer assistance in assembling the arm at our place or at the customer's The cost of such an operation is 2000 Euro. - We will also help with conversion to Reach Stacker (container ship) We have a gripper on site at our place. ---- Forklift Svetruck SVE-TMF 12/9 HB - 1990 Dimensions: 6.8 m × 3.53 m × 3.9 m Rsdsv Rbn Eopfx Aazsn Model: SVE-TMF 12/9 HB Net weight: 50000 kg Year of production: 1990 Lifting height: 7500 mm Lifting max 12t Lifting at the highest point max 9t Cabin equipment: Radio Air conditioning + Webasto CB Radio 2 Seats = Engine Brand Volvo Type inline Power 393 HP (289 kW) Fuel diesel Capacity 12130 cm³ Number of cylinders 6 ----- Attention! The given price is in Netto value and is valid for Export and for companies. A large discount is possible for an individual customer - We invite you to contact us directly by phone, so that you can get your best price :) — After price negotiations, we are able to record a video or perform a computer or paint meter test for a determined customer, in order to calmly buy the equipment remotely. ===== Of course, we encourage you to come for an inspection, but if it is not possible, this form of purchase will be available, which guarantees a safe form of purchase. - Dear Customer! If you want to buy DELICATE Equipment, THEN WE INVITE YOU TO US. If YOU ARE ONLY GUIDED BY PRICE, and parameters such as: ACTUAL MILEAGE OR ACCIDENT FREENESS are SECONDARY VALUES for you, then in our humble opinion it is a WASTE OF YOUR AND OUR TIME. ——— We provide professional, free advice and are characterized by an individual approach to the Client. We will always give you reliable advice even if you are in arrears with payments or are in the Bik and Krd databases. - We have attractive credit or leasing conditions. Detailed information about financing will be provided by our representative Mr. Tomasz at tel.: 667910542 ===== THIS ANNOUNCEMENT IS FOR INFORMATION ONLY AND DOES NOT CONSTITUTE AN OFFER IN ACCORDANCE WITH ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ADVERTISEMENT OR OUT-OF-DATE ADVERTISEMENT.

Condition: used, tank capacity: 50 l, GENERAL Design: upright Remarks: Base saddle made of 1.4541 (V2A); handhole approx. 800 x 970 mm; 1 lateral connection diameter approx. 10 mm in the lower cylinder area (not at the lowest point; no bottom outlet); 1 small dent at the cylinder/top head transition; small dents in the lower bottom Inner diameter: 390 mm Total height: 660 mm Location: Bremen Volume: 50 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Last application: Pharmaceutical Redjyclttspfx Aazen VESSEL Mounting type: Base saddle EQUIPMENT Manway/Dome: Handhole

Condition: used, tank capacity: 500 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (painted), ball valves glued Total width: 1,230 mm Total height: 1,150 mm Total length: 1,030 mm Location: Bremen Rjdpfx Aaoyclqxszjn Nameplate: Volume: 500 litres Material in contact with product: V2A 1.4301 (AISI304) Condition: used Previous application: adhesive industry TANK Stand type: Frame EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: 75 mm Note: signs of use