Used Hot Foil Stamping for sale (15,297)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, equipped with: Iedpjrwnyvofx Adwjal 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 2 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Iaodpfx Adotx E N Tjwol Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: new, Year of construction: 2024, Asphalt Hot Box / Asphalt Recycler НВ-1/Recycler Asphalt Hot Box / Asphalt Recycler HB-1 is designed to maintain the working properties and temperature of hot asphalt during its transportation from the asphalt plant to the place of work and in its process. High quality thermal insulating mineral wool, which is installed around the working tank, is used for thermal insulation. The unit also has the function of asphalt recycling with an infrared heater located at the top. The asphalt is heated on a grate. SPECIFICATIONS: Ijdpfxjvprxxo Adwsal - Volume - 0,4 m3 - Capacity is 2-2.5 tons per 8 hours. - Propane fuel - Consumption - 3-4 kg / h (depending on the outside temperature) - Mechanical control (open fire ignition system)

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED Isdpfx Adexxinfjwjal - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: good (used), Welding rail -from: Röschermatic VM-19/S/CE vacuum unit -Length: 495/90/H 160 mm -Weight: 1.5 kg Isdpod I H Szofx Adweal

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C Iedpfox S E Nuex Adwjal adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: excellent (used), Year of construction: 1983, equipped with: 1 Feeding system right hand side 1 Eccentricpress 250 kN 5 Slide units working range: wire diamter range: 1,5 - 5,0 mm Iaodpfx Adsvuzvdswsl stripmetal width: max. 50 mm feeding length: max. 200 mm output: max 450/min.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Used high-performance roll garbage bag production machine for sale. Equipment: Roll lifter, longitudinal welder, folder, bottom welder, labeller. The machine is in excellent condition and can be inspected during operation. Support and spare parts are available from the manufacturer. Technical data: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive type: Servo - Number of tracks: 2 Additional specifications: - Heavy-duty, automatic 2-lane roll garbage bag production machine - Film thickness: LD/LLDPE: 0.012–0.060 mm (single layer) HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (speed depends on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm - Power demand: 20 kW Ijdpfxsx Ry Eno Adwjal Single-line labelling machine: - Label width: 70–200 mm (1 lane) - Label length: 180–350 mm - Maximum label roll diameter: 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife, longitudinal welder 3. TA-800C1 Bag making and welding unit 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Additional details: - Warranty: None - Current status: In production - Availability: Immediate

Condition: used, Year of construction: 2003, Year: 2003 Type: hot or cold product filling line for pots and bottles Application : Suitable for viscous products such as creams in the cosmetics / pharmaceutical or other industries   Type : Automatic linear filler Manufacturer: Tirelli Model : CHICO 2P Year: 2003 Number of heads : 4 units Volumetric filling technology with 2 metering pistons Jacketed 25 L hopper + piping Temperature controller Pneumatic bottle-lock centring device PLC controls and configuration Linear conveyor with pallet chain SISE 95E6E 13 DC60 temperature controller (3.5 KW / 90°C / Water) – Year 2014   Type : Automatic capping machine with star wheel Type of cap: screw cap Manufacturer: Tirelli Model : RO Year: 2003 Automatic cap feeder : vibrating bowl + giraffe conveyor Presence / jamming / dispensing sensors Pick and place   Type: Automatic jar / bottle unscrambler Manufacturer: Romaco Bosspack Model : MS150 Year: 2003 Output : up to 150 jars / min Product dimension : Iedpfx Ajx R Ddbodwoal Diameter: 30 mm min / 100 mm max Height : 50 mm min / 200 mm max Width : 30 mm min / 100 mm max Length : 30 mm min / 100 mm max Machine dimensions : Length : 150 cm Depth : 340 cm Height : 140 cm   Video in running condition :

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 179057784, Technical characteristics: Working Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 travel (working stroke): 335 / 289 mm - Rapid traverse in X: 30 m/min - Z1/Z2 travel: 560 / 494 mm - Rapid traverse in Z: 30 m/min - Standard enclosure with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface as per DIN 55026: Size A6 - Max. speed: 4500 rpm - Power at 100 / 40% duty cycle: 23 / 18 kW - Torque at 100 / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret X1/Z1: Tool Carrier with Live Tools - Cylindrical tool holder interface as per DIN 69880: 8 x VDI40 - Max. tool length: 130 mm - Tool stations: 1 x 8 - Max. speed: 4500 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Turret X2/Z2: Tool Carrier with Live Tools - X-HOT unit for polygonal machining, max. eccentricity/stroke: 8 mm - X-HOT tool holder clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3000 mm (6477 mm with chip conveyor), Width = 3000 mm, Height = 3650 mm - Weight: 11,000 kg Main Features and Capabilities Iasdsxw R Rfepfx Adwol - Vertical design: Optimal chip removal, manual or automatic loading/unloading - Control: Siemens 840D, controls NC1 and NC2 - High precision: Positioning accuracy in X and Z axes ±0.002 mm (Heidenhain linear scales) - Main spindle: High power, wide speed range - Live tools: Allows drilling and milling operations - Tool life monitoring - Chip conveyor / Coolant: Knoll - Coolant filtration unit, max. 40 bar: Knoll FKA/1400 - Part presence detection system with low air pressure sensor - Automation infrastructure: Prepared for robot integration - Fully enclosed work area with working area lighting - Documentation: Electronic and hardcopy available Machine condition: Working only on X1/Z1 – X2/Z2 operational, but XHOT not available

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Unox Bakerlux 3 Shop.Pro Touch Convection Oven New NEW NEW NEW NEW NEW NEW NEW NEW NEW Unox Convection oven for 3 trays 600 x 400 mm Stainless steel design with front glass panel Manual flap door opening downward Touch control panel with programmable settings Adjustable temperature range up to 260°C Iodpfxsxmrkxs Adwsal Steam injection (humidification) via fixed water connection High-performance convection oven 230V connection with plug Dimensions: 800 x 811/860 x 425 mm (W x D x H) 3/4 inch water connection Oven is NEW & safety tested with warranty + spare parts service Quality from your authorized Unox specialist dealer & service partner! Benefit from over 35 years of experience! Options: Baking trays 600x400 Aluminum perforated trays 600x400 Pure water filter Base stand Maintenance contract Delivery service Spare parts box for added security Service package Instruction & commissioning Visit our Unox Baking Center!

Condition: like new (used), Airpad Fromm AP502 Perfect condition, ready to work. Iodswyak Aopfx Adweal Compact and easy to use, the Airpad AP502 produces protective padding material. No operator needed – just one button press. Pre-programmed programs for the production of airbags of various sizes. Changing the program by pressing a button. Weight: 228 kg Year of production 2018.

Condition: excellent (used), Year of construction: 1968, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units 4 Standard slide units Iasdpfjl D N Hvjx Adwjl Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: good (used), Minipack Torre Mailbag Packer The device is functional and ready for production, in very good condition. The photos show the product being sold. Produced in Italy. Manufacturer’s description: Mailbag is a digital compact system for packaging in plastic bags, ideal for packaging brochures, newspapers, books. Single-phase power supply (airless) is easy to use with mounted wheels, the system can be easily moved from one place to another with minimal fuss. A product, e.g. a magazine inserted into the feeder, initiates a photocell, detects the package and moves the film and product to the closing system. The combination of transverse and longitudinal seals closes the package and also creates a seal for the next product. The finished package gently falls into the receiving basket at the bottom of the machine. Isdpswxtbrefx Adwsal Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width 160 mm Max. package width 250 mm Min. package length 100 mm Max. package length 360 mm Max. film thickness 30 microns Machine dimensions 600 mm x 840 mm x 1050 mm Weight 144 kg Power supply 230V Power consumption 0.6 kW

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm Iaeden E N Ndepfx Adwsl output: up to 350/min

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit Iedporpk Axjfx Adweal 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit Iaedsr Axlvopfx Adwjl working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm Iasdotmtzkspfx Adwsl strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 2 Narrow-slide-units 3 Standard-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Isdpspq H Upofx Adwjal Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units Iaodpfxotzlzae Adwjl 2 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: Iajdpfx Adstmty Nswjl 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: Iaedpfxstqf Iqe Adwjl 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine 2 pcs. Grip feeder system right hand side 1 pce. Grip feeder system left hand side Iaodpfxewxarqj Adwsl 4 pcs. Width slide units (welding press slides) 1 pce Welding sytem BIHLER B 1000 Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1978, equipped with: 1 Grip feeding system right hand side 4 Slide units Iedjma Tf Dopfx Adwsal Working range: Wire diameter range: 0,5 - 2,0 mm Stripmetal width: max. 10 mm Feeding length: max. 100 mm Output: max. 300/min.

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm Iaede Syv Tepfx Adwsl output: 400/min. complete with ciller and motorized decoiler