Used Hurlimann Xt 909 for sale (1,185)

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Podpfx Ajz Spd Ijirorc Pick-up only.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Heating zone length: 5,565 mm Electronic temperature control Temperature stability: ±2°C Fast heat-up time Prjdpfey Ty Sgox Airoc Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Machine available for inspection.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Prsdpfx Aijz Aaw Serjc Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Psdozfaaxspfx Airjrc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, color channels: 6, REDUCED FOR QUICK SALE SPACE NEEDED 1/11/26 IN PRODUCTION NOW 2016 ARIZONA 3x2.5M 1260XT FLATBED PRINTER Superb condition UV flatbed printer Also includes 2.2 M roll unit for different substrates on roll -banners etc 3M x 2.5M bed great for high quality up to 10x5ft boards 6 colour channels CMYK 2xwhite all heads perfect Pneumatic PIN registration. Self cleaning option installed Pedpfx Asz Suv Tjirorc VERY Low print count only 27,794 prints from new & been on Canon service contract Delivery install training and warranty in UK OR Packing, locked down and loaded for export

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Podez N A Npspfx Airerc Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: used, Year of construction: 2006, functionality: fully functional, 1 Polar Mohr paper cutting machine Model: 115 XT Year of manufacture: 2006 Light barriers Side tables Location: Austria Pjdpfx Aisz Dvxxororc Available: immediately, by arrangement

Condition: used, Year of construction: 2016, Format: 1250 x 2500 mm Equipment: Number of ink cartridges: 8 Color channels: 8 Number of printheads: 16 Pedpfxoyx Hu Se Airsrc Type of input current: Alternating current (AC) Total weight: 1,410 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 1,625 kg, product height (max.): 50 mm, product length (max.): 3,080 mm, product width (max.): 2,500 mm, TECHNICAL DETAILS Print Head Technology: Piezo inkjet technology with variable drop size Drop Size: 6–42 pl Ink Type: UV-curing inks Canon IJC357 or IJC358 Color Channels: 8 Standard Color Configuration: CMYK, White, Varnish, Light Cyan, and Light Magenta Maximum Media Area: max. 308 × 250 cm Maximum Printable Area: max. 309 × 251 cm Maximum Media Thickness: max. 50.8 mm Maximum Media Weight: max. 34 kg/m² Vacuum System: Independent vacuum zones for secure hold without taping Edge-to-edge printing possible RMO Specifications Maximum Roll Width: max. 220 cm Minimum Roll Width: min. 90 cm Maximum Roll Diameter: max. 24 cm Maximum Roll Weight: max. 50 kg Core Diameter: 3 inches Core Diameter approx.: 7.6 cm Speed and Productivity Maximum Throughput: max. 52.8 m²/h Production Mode: approx. 27.0 m²/h Quality Mode: approx. 19.8 m²/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,830 x 4,660 x 1,300 mm Weight: approx. 1,625 kg Power Supply: 2 × 200–240 V Frequency: 50/60 Hz Fuse Rating: 16 A Compressed Air: 6 bar EQUIPMENT RMO for roll media UV-curing inks Canon IJC357 or IJC358 Prjdpfx Aijzy Ngdorsc Independent vacuum zones Edge-to-edge printing function Compressed air connection for cleaning and static control

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Pedjxx R S Ejpfx Airjrc Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,000 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis Quick-Tech XTS-42 CNC Lathe was manufactured in 2013. It features a twin-spindle configuration with a maximum machining length of 350 mm on the main spindle and a turning diameter of 100 mm on the sub-spindle. The machine is equipped with a Mitsubishi M70 control and has a bar capacity of 42 mm. If you are looking to get high-quality turning capabilities, consider the Quick-Tech XTS-42 machine we have for sale. Contact us for further details. • Number of spindles: 2 • Spindle motor power: Main spindle: 7.5 kW; Sub-spindle: 3.7 kW • Spindle bore: Main spindle: 44 mm; Sub-spindle: 30 mmMovement • B-Axis: Present, according to seller description • Others: Z1-axis: 470 mmExtra Information • Bar capacity: 42 mm • Main spindle max. machining length: 350 mm • Main spindle chuck: Patron KK5-173E/42B • Main spindle nose: ISO A2-5 Podpfx Ae Afi E Ijirorc • Sub-spindle bar capacity: 42 mm • Sub-spindle max. machining length: 155 mm • Sub-spindle max. turning diameter: 100 mm • Sub-spindle chuck: Patron KK5-173E/42B • Sub-spindle nose: ISO A2-5 • X / Y / Z / Z1 servo motors: Mitsubishi, 1 kW • Technical specification available as attachment • Preliminary evaluation requested • Still missing / useful to request before publication: Serial number • Still missing / useful to request before publication: Exact machine location • Still missing / useful to request before publication: Operating hours / spindle hours • Still missing / useful to request before publication: Confirmation machine is fully operational • Still missing / useful to request before publication: Whether machine is under power and can be demonstrated • Still missing / useful to request before publication: Number of axes / exact B-axis configuration • Still missing / useful to request before publication: Driven tools / live tooling • Still missing / useful to request before publication: Tooling configuration / number of tool stations • Still missing / useful to request before publication: Bar feeder included or not • Still missing / useful to request before publication: Chip conveyor • Still missing / useful to request before publication: Additional accessories • Still missing / useful to request before publication: Recent photos • Still missing / useful to request before publication: Nameplate photo • Still missing / useful to request before publication: Video under power • Still missing / useful to request before publication: Maintenance / repair history • Still missing / useful to request before publication: Any active alarms or known technical issues Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Podpfx Aisxx Saworjrc Machine Status: WORKING

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Pjdpfx Aism E I D Herorc Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: automatic, fuel type: gasoline, first registration: 04/2025, next inspection (TÜV): 04/2027, color: grey, front tire size: 205/75 R 14, rear tire size: 255/60 R 14, machine/vehicle number: 3JB3PA768SJ001247, Equipment: lighting, trailer coupling, our vehicle number #31076 Predpez I Rpasfx Airoc ATTENTION: Sale only to commercial customers!!! Euro V 102 hp 4x4 Tire sizes A1 205/75 R 14 and A2 255/60 R 14 Permissible total weight 788 kg Payload 225 kg Unladen weight 563 kg Tank capacity 19 liters Color: Mineral Grey/Orange Aluminum rims Differential lock CVT transmission with pDrive primary clutch Disc brake HD3500 winch Passenger seat Skid plate full set CanAm Integrated heated grips LED light bar Footrest kit G3 LinQ front luggage rack SP Connect cell phone holder incl. charging cable Digital onboard computer Front/rear bumper guards Trailer hitch ball head Three-stage dynamic power steering (DPS) Modes: Work / Standard / Sport Intelligent engine braking (iEB) 7.6-inch wide digital display Financing possible upon request!!!

Condition: excellent (used), mileage: 74,000 km, power: 250 kW (339.91 HP), first registration: 04/2021, axle configuration: 6x2, gearing type: automatic, Year of construction: 2021, Equipment: EBS, electric window regulation, trailer coupling, = Additional options and accessories = - Closed cabin - Coupling - Extra steering axle - Low-noise - Rotating beacon - Toolbox - Visor = Remarks = Nice, clean, lightly used Scania P340 XT on CNG Scania P340 XT Atlas 96.3E - A3L loading crane + VDL container system Ready for the future in any environmental zone thanks to CNG EURO 6D 6x2 Steering and lift axle at the back Very low mileage 74,000 km Very low crane hours 259 hours Crane with remote control In very nice condition VDL container system Various boxes Automatic Cabin equipped with various storage compartments Camera Infotainment Steering wheel controls MC tray Container can optionally be purchased Container size 520x255x60 cm Prodpfxjzabvrj Airoc = More information = Type of fuel: CNG Front axle: Steering Rear axle 1: Lift axle; Steering Empty weight: 13.796 kg Carrying capacity: 14.204 kg GVW: 28.000 kg Emission class: Euro 6d Technical condition: very good Visual appearance: very good

Condition: excellent (used), mileage: 65,895 km, power: 331 kW (450.03 HP), first registration: 05/2022, axle configuration: 8x2, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 5,200 mm, loading space width: 2,450 mm, Year of construction: 2022, Equipment: ABS, air conditioning, crane, electric window regulation, = Additional options and accessories = - Air conditioning (automatic) - Electric windows for - Power take-off (PTO) - PTO - Sleeping cabin - Towbar 3500kg = Remarks = Drivetrain PTO: 2764 uur Crane Number of hydraulic extensions: 8+6 Number of support legs: 4 Crossstab Remote control: ✓ Rotator: × Prjdpjzucz Rjfx Airjc Winch: ✓ In perfect Scania P450 XT configured as an 8x2 rigid truck with Effer 95tm crane. In addition to the options already mentioned, it features: -Refrigerator -Automatic -8x2 with three steering axles -Tow bar -snapping mouth -Effer 955 tap -8x extendable -Jib extendable 6x -CROSSTAB!!! -Winch -Ballast program -2764 hours. etc etc Belgian car in perfect condition = More information = Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 26.605 kg Functional Crane: Effer 955 8S/JIB 6S LIER, year of manufacture 2022 Height of cargo floor: 122 cm Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, mileage: 4,59,000 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, empty load weight: 16,070 kg, maximum load weight: 15,855 kg, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, emission class: euro6, suspension: steel, Equipment: air conditioning, had accident, | Scania P500 XT Meiller Bordmatik | Leather steering wheel | Refrigerator, digital tachograph | Suspension: leaf spring/leaf spring | Retarder | Air conditioning, radio, Bluetooth hands-free system | Tires: 385/65R22.5 and 315/80R22.5 | Trailer coupling | Austrian vehicle | Ready for operation - tipper is in good condition | Only cabin damage | Subject to errors, typing errors, and prior sale. Psdpfj Agc Afjx Airerc

Condition: used, mileage: 3,39,500 km, power: 302 kW (410.61 HP), first registration: 11/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, soot filter, Scania G410 XT 8x4 Schwarzmüller 3-way tipper Retarder, external sun visor, air conditioning, auxiliary heater, differential locks, radio with navigation system and Bluetooth, EURO 6C, multifunction steering wheel, glass roof hatch, cool box, 2x electric windows, electric mirrors, ABS, central locking with remote control. Unladen weight: 13,730 kg Pjdpfjyv Tuyex Airerc Payload: 18,195 kg

Condition: used, mileage: 3,39,500 km, power: 302 kW (410.61 HP), first registration: 11/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, soot filter, Scania G410 XT 8x4 Schwarzmüller 3-way tipper Retarder, external sun visor, air conditioning, auxiliary heater, differential locks, radio with navigation system and Bluetooth, EURO 6C, multifunction steering wheel, glass roof hatch, cool box, 2x electric windows, electric mirrors, ABS, central locking with remote control. Psdeyv Tumspfx Airorc Unladen weight: 13,730 kg Payload: 18,195 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 66271, - Device designation: XT H 225 L - Manufacturer: Metris X-Tek Systems Ltd. - Serial no.: JN1373 - Year of manufacture: 2008 - Dimensions of X-ray unit enclosure: - Length: 2422 mm - Depth: 1275 mm - Height: 1990 mm - Weight: 3500 kg - Dimensions of control console: - Width: 550 mm - Depth: 746 mm Prjdpfoym N Txex Airoc - Height: 1076 mm - Weight: 500 kg - Last maintenance/repair: February 2023 (job report attached) - Last used and powered on: Mid 2024 - The unit was shut down as the next maintenance was due, but it was decided not to incur these costs. Up to that point, the machine was running perfectly. - The scope of delivery includes various accessories, such as several filters for scanning mainly plastic materials, clamping and alignment aids, operator’s manual in paper form, etc.

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering Pedpfxjz Nu I Ds Airjrc - Air-suspended driver's seat - Rear-view camera - Heated mirrors Errors and prior sale excepted. Internal vehicle number: 10672. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: good (used), Polar Mohr 92 XT Paper Guillotine The machine is in very good condition, fully serviced, and ready for production. Polar Mohr is the most highly regarded brand of paper guillotines; this model is their flagship product. Technical specifications: Cutting width: 920 mm Stack height: 130 mm Programmable controller with a 15″ color touchscreen display Prsdpfoz S Uyljx Airec Air table Safety light curtains (photocells) Chrome-plated table surface Ball-screw drive for the backgauge Optical cutting line Extended side tables Knife change system operated from the control panel Weight: 2000 kg Power supply: 380V Includes documentation, a tool kit, a jogger block, a spare knife, and one knife installed in the machine.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3520130500485, operating pressure: 150 bar, total length: 406 mm, high-pressure hose length: 15,000 mm, total height: 1,016 mm, total width: 406 mm, input voltage: 220 V, fuel: electricity, overall weight: 38 kg, pressure (max.): 165 bar, The Nilfisk Poseidon 3-30 XT is equipped with a hose reel and two high-pressure lances. The integrated detergent injector and the suction hose on the rear of the unit enable quick and easy application of the detergent. The rotary knob for detergent dosage is located in the same position. Pjdpfozl Tu Ajx Airerc Technical specifications: Pressure: max. 165 bar Cleaning performance: 3.0 Max. inlet temperature: 60 degrees Weight: 38 kg

Condition: used, mileage: 3,40,593 km, power: 331 kW (450.03 HP), first registration: 12/2020, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2028, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, Internal Vehicle No.: G400174 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova German Scania 450 XT 4x4 Tractor Unit | Tipping Hydraulics | Euro 6d | 16 Units Available For sale are 16 used Scania 450 XT 4x4 tractor units from the 2020 and 2021 model years. The mileage ranges between approximately 302,000 and 408,000 km. Psdjzqicgspfx Airjrc The vehicles are equipped with 450 hp diesel engines, Scania Opticruise automatic transmissions, all-wheel drive, tipping hydraulics, a power take-off, and leaf/air suspension. Due to the robust XT design, they are particularly suitable for construction site and dump truck applications. Technical Data: * Manufacturer/Model: Scania 450 XT * Vehicle Type: Standard Tractor Unit * Model Years: 2020 and 2021 * Power: 331 kW (450 hp) * Displacement: 12,742 cm³ * Fuel: Diesel * Transmission: Automatic/Scania Opticruise * Transmission: GRS0905 * Scania Ecocruise * Transmission Oil Cooler * Emission Standard: Euro 6d * Environmental Badge: 4 (Green) * Axles: 2 * Wheel Arrangement: 4x4 * Wheelbase: 3,600 mm * Drive: All-Wheel Drive * Hydraulic System: Tipping Hydraulics * Power Take-Off: EG652P * Suspension: Leaf/Air * Fifth Wheel Height: approx. 1,350 mm * Permissible Total Weight: 20,500 kg * Unladen Weight: 8,850 kg * Payload: 11,650 kg * Fuel Tank Capacity: 400 liters * Aluminum Fuel Tank * Color: Yellow * MOT: New * Vehicle Number: G400185 * Condition: Used Equipment: * Scania XT Design * Opticruise Automatic Transmission * Engine Brake, 2-stage * ABS * ASR * Differential Lock * Tipping Hydraulics * Power Take-Off * Drum Brakes on Front and Rear Axles * Heavy-Duty Stabilizer Bar at Front * Air Conditioning * Auxiliary Heater, 2 kW * Heated Comfort Driver's Seat * 1 Sleeper Cab * Cruise Control * Electrically Adjustable and Heated Exterior Mirrors * Electric Windows, Left and Right * LED Daytime Running Lights * Fog Lights * Roof Marker Lights * Air Horn * Sun Visor * Sunroof * CG Cab Tires: * Front Axle: 385/65 R22.5 * Rear Axle: 315/80 R22.5 Available Vehicles: * 03.12.2020 - YS2G4X40005606169 - 4x4 - 377,585 km * 07.12.2020 - YS2G4X40005606365 - 4x4 - 348,389 km * 07.12.2020 - YS2G4X40005606348 - 4x4 - 302,800 km * 07.12.2020 - YS2G4X40005606584 - 4x4 - 343,862 km * 03.12.2020 - YS2G4X40005606255 - 4x4 - 408,008 km * 07.12.2020 - YS2G4X40005606440 - 4x4 - 378,609 km * 07.12.2020 - YS2G4X40005606413 - 4x4 - 354,302 km * 07.12.2020 - YS2G4X40005606452 - 4x4 - 387,469 km * 07.12.2020 - YS2G4X40005606408 - 4x4 - 340,793 km * 03.12.2020 - YS2G4X40005606276 - 4x4 - 319,700 km * 03.05.2021 - YS2G4X40005624233 - 4x4 - 351,327 km * 03.05.2021 - YS2G4X40005624498 - 4x4 - 314,612 km * 03.05.2021 - YS2G4X40005624047 - 4x4 - approx. 350,000 km * 03.05.2021 - YS2G4X40005624143 - 4x4 - 345,983 km * 03.05.2021 - YS2G4X40005624599 - 4x4 - 344,498 km * 03.05.2021 - YS2G4X40005624462 - 4x4 - 326,043 km The technical specifications, mileage, and equipment features may vary slightly depending on the vehicle. Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale are subject to change.

Condition: used, mileage: 4,12,602 km, power: 331 kW (450.03 HP), first registration: 12/2020, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2028, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, Internal Vehicle No.: G400186 Available immediately at our yard in Kaufungen. For more information, please contact: Psdpfszqic Hjx Airorc * Luis Lucena * Viktoria Sologubova German Scania 450 XT 4x4 Tractor Unit | Tipping Hydraulics | Euro 6d | 16 Units Available For sale are 16 used Scania 450 XT 4x4 tractor units from the model years 2020 and 2021. The mileage ranges between approximately 302,000 and 408,000 km. The vehicles are equipped with 450 hp diesel engines, Scania Opticruise automatic transmissions, all-wheel drive, tipping hydraulics, auxiliary drive, and leaf/air suspension. Thanks to the robust XT design, they are particularly suitable for use on construction sites and as dump trucks. Technical data: * Manufacturer/Model: Scania 450 XT * Vehicle type: Standard tractor unit * Model years: 2020 and 2021 * Power: 331 kW (450 hp) * Engine displacement: 12,742 cm³ * Fuel: Diesel * Transmission: Automatic/Scania Opticruise * Transmission: GRS0905 * Scania Ecocruise * Transmission oil cooler * Emission standard: Euro 6d * Environmental badge: 4 (Green) * Axles: 2 * Wheel arrangement: 4x4 * Wheelbase: 3,600 mm * Drive: All-wheel drive * Hydraulic system: Tipping hydraulics * Auxiliary drive: EG652P * Suspension: Leaf/Air * Saddle height: approx. 1,350 mm * Permissible total weight: 20,500 kg * Tare weight: 8,850 kg * Payload: 11,650 kg * Fuel tank capacity: 400 liters * Aluminum fuel tank * Color: Yellow * MOT: New * Vehicle number: G400185 * Condition: Used Equipment: * Scania XT version * Opticruise automatic transmission * Engine brake, 2-stage * ABS * ASR * Differential lock * Tipping hydraulics * Auxiliary drive * Drum brakes on front and rear axles * Heavy-duty stabilizer bar at the front * Air conditioning * Auxiliary heater, 2 kW * Heated comfort driver's seat * 1 sleeper bed * Cruise control * Electrically adjustable and heated exterior mirrors * Electric windows, left and right * LED daytime running lights * Fog lights * Roof beacon * Air horn * Sun visor * Sunroof * CG cab Tires: * Front axle: 385/65 R22.5 * Rear axle: 315/80 R22.5 Available vehicles: * 03.12.2020 - YS2G4X40005606169 - 4x4 - 377,585 km * 07.12.2020 - YS2G4X40005606365 - 4x4 - 348,389 km * 07.12.2020 - YS2G4X40005606348 - 4x4 - 302,800 km * 07.12.2020 - YS2G4X40005606584 - 4x4 - 343,862 km * 03.12.2020 - YS2G4X40005606255 - 4x4 - 408,008 km * 07.12.2020 - YS2G4X40005606440 - 4x4 - 378,609 km * 07.12.2020 - YS2G4X40005606413 - 4x4 - 354,302 km * 07.12.2020 - YS2G4X40005606452 - 4x4 - 387,469 km * 07.12.2020 - YS2G4X40005606408 - 4x4 - 340,793 km * 03.12.2020 - YS2G4X40005606276 - 4x4 - 319,700 km * 03.05.2021 - YS2G4X40005624233 - 4x4 - 351,327 km * 03.05.2021 - YS2G4X40005624498 - 4x4 - 314,612 km * 03.05.2021 - YS2G4X40005624047 - 4x4 - approx. 350,000 km * 03.05.2021 - YS2G4X40005624143 - 4x4 - 345,983 km * 03.05.2021 - YS2G4X40005624599 - 4x4 - 344,498 km * 03.05.2021 - YS2G4X40005624462 - 4x4 - 326,043 km The technical data, mileage, and equipment features may vary slightly depending on the vehicle. Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale are subject to change.