Used Hydraulic System for sale (49,688)

Condition: good (used), Year of construction: 2008, machine/vehicle number: 1008360, Offer 26291 Technical data: - Cutting range at 90°: - Round: 310 mm - Flat: 520 x 310 mm - At 45° left, flat: 350 x 310 mm - At 30° left, flat: 230 x 310 mm - At 45° right, flat: 260 x 310 mm - Miter adjustment, left and right - Smallest material dimensions, round/flat: 10/10 x 8 mm - Smallest cutting length: 40 mm - Digital miter angle display - Saw blade dimensions: 5000 x 34 x 1.1 mm - Cutting speed, continuously variable: 20 - 140 m/min - Cutting pressure, continuously adjustable: 0 - 10 m/min - Hydraulic material clamping system with tension pressure regulation - Bundle clamping device - Micro-spray coolant system - Total drive power: 400 V / 6.0 kW - Space requirement: approx. W 3000 x H 1600 x D 1750 mm - Weight: approx. 1900 kg Bedpfx Ako Ahniconjww - 9 pieces of height-adjustable infeed and outfeed roller stands

Condition: ready for operation (used), Year of construction: 2026, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electric unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (floor mounting possible) -Depth of the support for the height-adjustable work table (cross member): 245 mm -Cross member adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross member via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Including 8 pressure pads with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction Bwjdpfx Aeztfbweknjw -Including work lamp to illuminate the working area -Pressure gauge for pressure indication -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 275 kg Subject to errors and omissions

Condition: used, Year of construction: 2012, machine/vehicle number: 02 13 2202, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, volume flow: 16,000 m³/h, suction capacity: 16,000 m³/h, actuation type: electric, Equipment: CE marking, documentation/manual, Industrial dust extraction and filtration system, built in 2012 by the Italian company SILVI & C. S.r.l. The system is complete with a 22 kW fan, cartridge filtration system, automatic filter cleaning using compressed air, control panel, and STS CO₂ fire suppression system. Technical specifications: Manufacturer: SILVI & C. S.r.l. – Italy Year of manufacture: 2012 Serial number: 02 13 2202 Airflow rate: 16,000 m³/h Static pressure: 350 mm H₂O (approximately 3,430 Pa) Electrical power: 22 kW ATEX classification: II 3D – Zone 22 – T 150 °C CE marking Electrical supply: 400 V Equipment: 22 kW industrial fan Cartridge filtration system Automatic compressed air filter cleaning system TURBO electronic control unit for filter cleaning management Main electrical panel with controls and protections STS CO₂ fire suppression system Two lower containers for dust collection Inspection and maintenance access doors Condition: Used system, functional and complete with fan. Machine manual and electrical diagram dated December 2012 are available. Further information and photographs available upon request. Bwjdj Ahrk Njpfx Aknow Transportation not included. Any dismantling and loading operations will be agreed upon separately.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! Bwjdpfx Aszw Apgeknjw The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Bwjdpfxs Ahxl As Aknow Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1995, sheet thickness (max.): 6,040 mm, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Bsdpfe Ahyv Djx Aknsww

Year of construction: 2024, condition: new, functionality: fully functional, Clamshell Bucket, Hydraulic Grab, Grain Bucket, Bucket Grapple, Clamshell Grapple, Capacity 2 m3 Gross Weight 1700 KG Rotation 360 Degree 1 Year Warranty Bjdspcdd Ajpfx Aknsww - Company Mikron Hidrolik

Condition: used, Year of construction: 2021, 2021 | Demarec DCC-30-C | Used Hydraulic Shear 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A nice concrete crushing shear for 20-35 ton excavators. Jaw opening is 1,150mm. It has an Oilquick OQ80 quickcoupler. Bodpfx Akszlrqvjnjww 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2015, condition: used, Welding System Manufacturer: TRUMPF Type: TruHeat HF 5010 Year of manufacture: 2015 Technical details: Input power: 12.5 kVA Power factor: 0.95 Rated power: 10 kW Output current: 560 A (RMS) Output voltage: 1500 V (RMS) Additional information: In our assessment, the machine is in mint condition and can be inspected under power by appointment. - incl. various accessories Accessories, tools, and clamping devices shown are included in the scope of delivery Bedpezq Hknjfx Aknsww only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Bsdpfx Aeztvwisknoww Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ PLC control, touch screen display, Siemens Bwodpfxeznli Ds Aknew

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Bwedpfx Akjzdbxbsnsw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Bodpfezd Rmgjx Aknsww Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system Bjdpfx Akszukp Aenoww -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Year of construction: 2023, condition: used, Welding System Manufacturer: TRASKO Type: CMT 1 Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 63 A Technical features: - Robotic MIG welding of individual components onto a cooling plate - Automatic torch cleaning and wire cutting - Rotary table with 2 stations for loading/unloading during the welding process Bedpfozbvnfox Aknsww In our assessment, the robotic welding system is in mint condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: Bwedpfsz Adz Isx Aknew • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Year of construction: 2007, condition: refurbished (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter but you can also use it stand-alone or connect it to a other brand machine. Bsdpsd Ddkbefx Aknoww

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Bsdpexyfmgefx Aknoww Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm Bjdpfxjyxm Hzs Akneww 16,000 cycles per hour

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Conveyor belt Bsdpfx Akezv Tz Rjnjww This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Bwsdezv T Auepfx Aknew Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: ready for operation (used), Year of construction: 2019, We have here a Pitney Bowes F700 also known as Relay 7000 envelope inserting system available. This machine is year 2019 and only has done 1.763.359 envelopes. Works without any problem after we have tested it fully. Configuration: 2 main feeders - high capacity feeders 4 docoument feeders - with the extra feeder trays you can switch between documents and folded inserts Folding station Envelope inserting module and station. Bwsdpfxjy R A D To Aknow

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Turnover module also available optional. Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - 1x AS2 shuttle feeder Bsdpfxozv Tizs Aknoww - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Year of built 2013 6 station base Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. Bedpfx Aszv Trcoknsww More and other feeders possible.

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! Bjdpfxsd Tfiue Akneww This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Please contact us to get a hold of this machine for a super discount price!