Used Hydraulic Valve for sale (20,814)

Condition: used, Year of construction: 1996, Lot consists of: (77) Hydraulic Tire Curing Presses Gbedpfx Ajxfz E Noabeu

Condition: ready for operation (used), Year of construction: 2019, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 150 t This Arburg 520 H was manufactured in 2019. It features a clamping force of 150 tons, tiebar spacing of 520x520 mm, and a screw diameter of 35 mm. It includes a selecting unit and a single platen design. Consider the opportunity to buy this Arburg 520 H hydraulic injection moulding machine. Contact us for more information. Gbjdpfx Aaoxllnzsbsu Application Types Injection Moulding

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness 1000 390 60 mm Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Max. Pressing force: 60 tons Gedpfxexl Tmfs Aabjbu 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Gbsdpfx Aajpvk Diebou Pressure control manometer Automatic pressure reset Opening timer

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg Godexl Rz Tepfx Aabebu

Condition: used, Year of construction: 2018, Serial number: W09S3L330J0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21508 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Decent tires Air suspension Hydraulic loading ramps Extendable Manual widening Toolbox Max payload: 39,265 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Gedpfjxlx Tdsx Aabebu Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 11635 Total Weight: 50900 Payload: 39265 Width: 255 Length: 1355 Model: Doll Maskinsemi m/ Bredding og Hydrauliske bruer

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Max. Capacity: Round: Ø 305 mm Square: 305 × 305 mm Rectangular: 305 × 400 mm Gbedpexm Rniofx Aabou Blade: Blade speed: 21, 39, 55, 68, 81 m/min Blade size: 3820 × 41 × 1.1 mm Motors: Blade motor: 3.7 kW Hydraulic motor: 0.2 kW Coolant pump: 0.1 kW OFFER – 29 October 2018 The Pinnacle of Cutting Performance Weight: 800 kg Power supply: 380 V, 3-phase, 50 Hz Space required (L × W × H): 1,905 × 800 × 1,700 mm Working height: 740 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,612 h, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 150 t This Arburg 520 H 1500-400 was manufactured in 2014. It features a closing force of 150 tons and a screw diameter of 35mm, suitable for precision hydraulic injection moulding. Operating on 400V, it has a total connected load of 89 kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Godpfxoxllkve Aabobu

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop Gbsdpfxjxmakgj Aabsu - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Godspbvqvjpfx Aabebu Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available Gedpfxoxl Rzgj Aabsbu -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Condition: used, Year of construction: 2019, Serial number: W09S3L330K0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21506 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Good tires Air suspension Hydraulic loading ramps Gbodoxlx S Hjpfx Aabou Extendable Manual widening Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Toolbox Max payload: 39,190 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is recently EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 14.08.2026 Own weight: 11710 Total Weight: 50900 Payload: 39190 Width: 255 Length: 1355 Model: maskinsemi

Condition: used, Press capacity: 50 ton Gsdpfx Aaswyplcjbsbu Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: ready for operation (used), Year of construction: 2010, Injection Unit Screw diameter 25 mm Clamping Unit Clamping force 80 t This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Gsdpfxoxlln Ie Aabjbu

Year of construction: 2025, condition: new, Hydraulic Impact Shear The hydraulic impact shear cuts material continuously in operation using two bushes. The electric servo drive enables precise speed control of the shear carriage. High cutting speed and fine adjustment of the shear bushes guarantee optimal cut surfaces. Cutting is also possible in stationary mode. A remnant piece detection system can also be used. When shearing is not feasible (e.g., for tubes, hollow profiles, etc.), a sawing device or a chipless cutting unit is mounted on the base frame instead of the shear head. 🚀 Maximum precision, maximum power – as strong as an elephant! 🐘 The essential machine for manufacturing quality steel – faster, tougher, and more reliable: 🔹 Speed: max. 120 m/min 🔹 Cutting capacity: 40 mm (hexagon & round bar) 🔹 Motor: Siemens 1FK8 servo technology 🔹 Gearbox: Neugart 🔹 Linear guide: THK (size 45) 🔹 Lead screw: Güdel 🔹 Hydraulic unit: Bosch Rexroth – hoses with clamp protection 🔹 Pressure sensor: Balluff 🔹 Automation: Siemens S7-1500TF 🔹 Safety: Pilz safety components 🔹 Operator panel: Siemens TP1500 🔹 Encoder: Sick AFM60A 🔹 Cooling unit: 2000W electrical cabinet cooling 🔹 With 30 mm wall thickness and 50 mm support beam – engineered for long-lasting operation. Gedpfxsxdvkqj Aabobu

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available Gsdpfx Aaevviggjbebu -Price: per piece -Dimensions: 225/90/H120 mm -Weight: 5.6 kg/piece

Condition: used, Year of construction: 1999, machine/vehicle number: 042-036/4, Press capacity: 100 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Godjvakd Uspfx Aabsbu Slide area: 530 x 400 mm Table surface area : 750 x 560 mm Hole in table: 200 mm Table height over floor: 710 mm Working speed: 10 mm / sec Approach speed: 150 mm / sec Return speed: 150 mm / sec Required power: 17 kW Dimensions L x W x H: 1.400 x 2.000 x 3.200 mm Weight of machine approx.: 5,1 ton

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Screw diameter 55 mm Shot weight 498 g Injection pressure 2070 bar Screw speed 220 rpm Clamping Unit Clamping force 2700 kN Opening stroke 600 mm Mould height min 200 mm Mould height max 600 mm Ejector stroke 200 mm Ejector force for / back 130 kN This WITTMANN TM Xpress 270/2250 Unilopg B6P was manufactured in 2013. It features a screw diameter of 55 mm, a maximum screw speed of 220 rpm, and a clamping force of 2700 kN. The machine offers a maximum shot weight of 498 g and an injection speed of 980.0 cm³/s. It includes a Wittmann CNC 8 control for enhanced operation. Contact us for more information about this machine. Application Types Gbedpfx Aajxgv Twsbsu Injection Moulding

Condition: good (used), Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Price: per piece Gedpfx Aeb A H H Neabsbu -Number: 4x Available -Dimensions: 270/120/110 mm -Weight: 6.7 kg

Condition: used, machine/vehicle number: H84 - 1331, Press capacity: 16 ton Throat depth: 250 mm Gbsdpfx Aeu Iuk Eoabsu Stroke: 300 mm Daylight: 600 mm Table surface area : 553 x 368 mm Approach speed: 121 mm / sec Return speed: 450 mm / sec Working speed: 45 mm / sec Required power: 7,5 kW

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 3700 mm Measurements depth 4100 mm Measurements height 2300 mm Machine weight 12500 kg Main Drive Spindle motor power 30 kW Additional Equipment CNC-controlled CybTouch 8 touchscreen for precise and easy settings Back gauge with ball screw and linear guide, CNC-controlled adjustable in the range of 5–1000 mm Motorized cutting gap and angle adjustment directly via the control panel 15 clamping units with rubber pads to prevent sheet slipping Built-in LED lighting to illuminate the cutting zone Safety elements include rear light curtain and fold-up plexiglass finger guard High-quality, resharpenable knives (upper knife 2-piece, lower knife 4-piece) Mobile foot pedal with emergency stop switch Built-in ball table for easy sheet movement Electrical components: Siemens and Mitsubishi // Hydraulic components: Hydac, Hoerbiger This Metallkraft HTBS PRO 3113 was manufactured in 2022. It's a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine. Application Types Shearing Gbsdjxd Ib Uspfx Aabeu

Condition: good (used), Year of construction: 1957, hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min Gjdpfxob A I Ele Aabjbu -Weight: 200 kg

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Godpfevai R Tex Aabjbu Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: ready for operation (used), Year of construction: 2007, operating hours: 73,135 h, General Data Machine weight 7800 Control Unit Brand KRAUSS MAFFEI Model n/a Clamping Unit Clamping force 130 t This Krauss Maffei 130-380 CX was manufactured in 2007. A hydraulic injection moulding machine with a clamping force of 130 tons and a screw diameter of 35 mm. It has accumulated 80,019 operating hours, ensuring extensive production experience. Consider the opportunity to buy this Krauss Maffei 130-380 CX hydraulic injection moulding machine. Contact us for more information. Gedpfx Aowpycdoabebu Application Types Injection Moulding

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Kleinschmidt, double-acting hydraulic cylinder stroke 25 mm -Type: KF22F-100 -Piston: Ø 100 mm -Piston rod: Ø 56 mm -Piston rod mount: M45x1 mm -Total length extended: 355 mm -Pressure range: max. 210 bar -Number: 2x cylinders available Gjdpfx Aexltqqoabebu -Price: per piece -Dimensions: Ø 243 x 330 mm -Weight: 36 kg/piece