Used Ink Mixing System for sale (42,514)

Condition: excellent (used), Year of construction: 2010, CEMENT SILOS 53 m³/68 tons, FILTER, LADDERS, SAFETY RAILINGS, LEVEL SENSORS, GOOD CONDITION + Bodpfx Ano Af Ey Ujdedi

Condition: excellent (used), Year of construction: 2008, DEMAG System 1500/1500-16000 injection molding machine Wittmann W753C robot Year of manufacture: 2008 Clamping force: 15,000 kN (1,500 tons) TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: DEMAG - Model: System 1500/1500-16000 - Year of manufacture: 2008 - Clamping force: 15,000 kN (1,500 tons) - Injection unit: 16000 - Additional equipment: Wittmann W753C linear robot 2. Clamping unit - Clamping force: 15,000 kN (1,500 tons) - Mounting plate dimensions (H × V): 2,150 × 1,880 mm - Column spacing (H × V): 1,500 × 1,250 mm - Minimum mold height: 700 mm - Maximum mold height: 1,400 mm - Maximum opening: 2,900 mm 3. Plasticizing unit and injection unit - Injection unit: 16000 - Screw diameter: 145 mm - Injection volume: 10,981 cm³ - Injection shot weight (PS): 9,880 g - Maximum injection pressure: 1,454 bar 4. Hydraulic and electrical system - Rated power of the pump motor: 165 kW - Heater power: 97 kW 5. Machine dimensions and weight - Length: 14,400 mm - Width: 3,400 mm Bede Af Id Hepfx Andedi - Height: 2,900 mm - Net machine weight: 74,000 kg (74 tons) - Weight of the additional unit identified in the documentation as the control cabinet: 21,000 kg (21 tons) - Total weight according to the provided data: approximately 95,000 kg (95 tons)

Condition: used, Year of construction: 2008, Control system: Beckhoff, operation: touchscreen. Equipment: extraction system, milling and sawing separation, shuttle/loading system, enclosed machining area, safety enclosure with viewing windows, emergency stop switch, start/stop push buttons, three-color signal tower, pneumatic air preparation unit, Ruwac industrial vacuum cleaner. The system is operational and was shut down at the beginning of the year. Inspection possible by arrangement. Bdods Ahi Tvopfx Andji

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. Bdodpjz D Efnofx Andei (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Bdjdpfodbny Esx Andoi Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Bdsdpfx Ashkzu Aendoi Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Bdedpfx Ashk S Sdjndsi Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Bjdpfxskdnv To Andsdi Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm Bdodpevpagdsfx Andoi height: 200cm width: 100cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions:

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology Bdsdpfxebu Dzie Andsi - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Bdedpjpy Uzysfx Andji Protection class: IP30 - Fault monitoring and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg

Condition: used, Nikon Bsdpfx Anoyiy Hbjdedi Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ Bdedpfxsznli Dj Andei PLC control, touch screen display, Siemens

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Bjdpfx Aey Dc R Tsndedi Subject to prior sale Sold as seen, without warranty without guarantee

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) Bodsy Dt D Dopfx Andodi We are happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2014, For Sale: 1x Diosna Linear System from year of manufacture 2014 including all accessories and control cabinet dimensions: Length x width x height 11.70 meters x 2.20 meters x 2.46 meters. Bdodpfx Aowlm T Ijndji Can be used for almost any type of bowl Originally used for an SP280, but can also be used with a minor adjustment for the W240 This linear system can also be sold in combination with a complete dough preparation system and multiple bowls. If you are interested, please let us know. If you have any questions or comments, feel free to contact us. Transport by arrangement. Best regards, Leo Holland

Condition: used, Year of construction: 2008, Year of manufacture: 2008 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Bdodpfjwiwpzsx Andoi Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Fire suppression system, Control cabinet Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm Bdodpexgumcsfx Andei - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Bsdpfxszimaae Andedi Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system Bsdszukp Aspfx Andedi -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface Bsdpfx Ajz N R U Hendodi The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Year of construction: 2023, condition: used, Welding System Manufacturer: TRASKO Type: CMT 1 Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 63 A Technical features: - Robotic MIG welding of individual components onto a cooling plate Bdjdpfx Ajzbvnfendji - Automatic torch cleaning and wire cutting - Rotary table with 2 stations for loading/unloading during the welding process In our assessment, the robotic welding system is in mint condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping Bdjdpfx Anez Adz Iedsi • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Bdsdpfx Anjzh I Dwedji Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h Bodjztvwiopfx Andsdi