Used International 633 for sale (9,913)

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Bsdpfx Agjv E Nwde Necw Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Bcedpexdimfsfx Ag Now Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 9,999 h, machine/vehicle number: 0013, BERNARDI ASPHALT MIXING PLANT 100T/HR Bsdpfxsyhl Hdo Ag Necw 3 PC. OF BITUMEN TANKS GAS HEATER FULLY MOBILE ON TRAILERS 60T HOT MIX STORAGE

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit Bcsdpfx Asynkwnsg Now • Rewinder _____ Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors Bcodpfxevwbvpe Ag Now > Linear guides > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) Bcedpsfnlkwofx Ag Njw The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers Bedeif Ek Rspfx Ag Njcw • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 Bodpfx Agjfhgvwe Nscw incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: Bodpfx Ajwgc I Rjg Nocw • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm Bodpjylynwjfx Ag Nocw • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, Bedjyabxyepfx Ag Necw 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: new, New device MASS International Model NS1 Angle Conveyor / L-Conveyor / Conveyor Belt Available at short notice Adjustable angle conveyor NS1 with collecting plates in the feed section Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Discharge height adjustable: 750 - 1050 mm Adjustable angle between feed and rising sections Slope angle variably adjustable Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on swivel locking castors Three-piece hopper plates for feed section Bcedpjuip Ilefx Ag Njw Other angle conveyors available in different dimensions, see list in image 3. Custom dimensions are no problem.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Bodpsu Ti Tvofx Ag Necw Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m Bedpewz Rfyefx Ag Necw New electrics With hand and foot remote control

Year of construction: 2015, condition: used, NARDI INTERNATIONAL K 200 WOOD DRYING KILN – 2015 For sale: Industrial wood drying kiln NARDI INTERNATIONAL K 200. The unit is in excellent technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. —— 1. Basic Specifications Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) —— 2. Construction Chamber made entirely of acid-resistant aluminium suitable for oak. Aluminium panels with 140 mm glass wool insulation. INOX bolts, thermal bridge elimination. External cladding made from trapezoidal sheet with integrated ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind speed up to 100 km/h —— 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High temperature bearings • Individual frequency inverters Provides uniform and energy-efficient drying. —— Bsdpsygcw Dofx Ag Nocw 4. Heat Recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts System significantly reduces energy consumption. —— 5. Control System CE control cabinet, IP55 rated. PC with LEONARDO 3.0 software (Windows 7). Features: • Multi-stage cycle programming • Parameter archiving • Graphic process visualization • Control of up to 32 chambers —— 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module —— 7. Commercial Information • Price: 60,000 EUR / 1 unit • Available: 2 units (2-chamber module) • Module price: 120,000 EUR • Sale only as a 2-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For enquiries, please contact us via email or WhatsApp.

Year of construction: 2016, condition: used, WOOD DRYING KILN CHAMBER NARDI INTERNATIONAL K 200 – 2016 For sale: Industrial timber drying kiln NARDI INTERNATIONAL K 200. The chamber is in excellent technical condition and ready for operation. 1. Main specifications Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: 80°C hot water, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) ——— Bsdpfoygcwwsx Ag Nscw 2. Construction Chamber made entirely of acid-resistant aluminium (suitable for oak processing). Aluminium panels with 140 mm glass wool insulation. INOX screws eliminate thermal bridges. Exterior cladding made of trapezoidal sheet with integrated ventilation channels. Structural resistance: • Snow load up to 120 kg/m² • Wind load up to 100 km/h ——— 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. ——— 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts The system significantly reduces energy consumption. ——— 5. Control system CE control cabinet, IP55. PC Computer with LEONARDO 3.0 software (Windows 7). Features: • Multi-stage cycle programming • Parameter archiving • Graphic process visualization • Control of up to 32 chambers ——— 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ——— 7. Commercial information Availability and price: • Price: 50,000 EUR / unit • Available: 4 units (4-chamber module) • Module price: 200,000 EUR • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For inquiries, please contact us via email or WhatsApp.

Year of construction: 2016, condition: used, NARDI INTERNATIONAL K 200 WOOD DRYING CHAMBER – 2016 The machine is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. ⸻ 1. Basic parameters Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water at 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) ⸻ 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels insulated with 140 mm glass wool. INOX screws eliminate thermal bridges. Exterior sheathing made of trapezoidal sheet metal with air ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h ⸻ 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Bcedpfeygcwksx Ag Now Ensures even and energy-efficient drying. ⸻ 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts This system significantly reduces energy consumption. ⸻ 5. Control system CE control cabinet, IP55. PC computer with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • parameter archiving, • graphic process visualization, • control of up to 32 chambers. ⸻ 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ⸻ 7. Commercial information • Price: EUR 50,000 / unit • Available: 4 units (4-chamber module) • Module price: EUR 200,000 • Sale only of complete module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If you are interested, please contact us by email or WhatsApp.

Year of construction: 2021, condition: used, For sale: NARDI INTERNATIONAL K 200 industrial timber drying kiln, year of manufacture 2021. The kiln is fully operational and available for inspection (start-up possible). The offer concerns 1 unit from a modular kiln system (5 units from 2021 available). NARDI INTERNATIONAL K 200 TIMBER DRYING KILN – 2015 For sale: NARDI INTERNATIONAL K 200 industrial timber drying kiln. The machine is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. — 1. Basic Specifications Batch capacity: approx. 115 m³ Bedsygcwdepfx Ag Nocw Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control system) — 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminum panels insulated with 140 mm glass wool. INOX screws, thermal bridge elimination. External skin made from trapezoidal sheet metal with integrated ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind load up to 100 km/h — 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 rating • High-temperature bearings • Individual inverters Ensures uniform and energy-efficient drying. — 4. Heat Recovery • Centrifugal fan • Dual heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts System significantly reduces energy consumption. — 5. Control System CE control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Capability for: • multi-stage cycle programming, • parameter archiving, • graphical process visualisation, • control of up to 32 chambers. — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial Information • Price: 72,000 EUR / unit • Available: 5 units (5-chamber modular system) • Sale only as a 5-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us via email or WhatsApp.

Year of construction: 2021, condition: used, For sale: NARDI INTERNATIONAL K 200 wood drying chamber / kiln (2021) The unit is in excellent technical condition, complete and ready for operation. Equipped with a LEONARDO 3.0 control system and heat recovery system. — 1. Basic specifications Bcodpfx Agsyf Uynj Now Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating capacity: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) — 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels insulated with glass wool (140 mm). INOX (stainless steel) screws, eliminating thermal bridges. External sheathing of trapezoidal sheet with ventilation ducts. Construction resistance: • Snow load up to 120 kg/m² • Wind resistance up to 100 km/h — 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. — 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducting The system significantly reduces energy consumption. — 5. Control system CE-compliant control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • parameter archiving, • graphical process visualization, • control of up to 32 chambers. — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial information • Price: 72,000 EUR / unit • Availability: 5 units (5-chamber module) • Sale only as a set of 5 units • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For enquiries please contact us via email or WhatsApp.

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Bsdpfjwhk Dvjx Ag Nocw

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Prodim proliner 8XCS scanner. Includes software. Small tripod. Leaps. Backpack. IPT and hook pen and remote. Extras included - Heavy duty plastic carrying case. Extra remote. Measuring support bars. Bcsdpfx Agoyl Spas Nsw

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) Bedpfowrn Iysx Ag Nscw The machine is CE-certified.

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Bcjdpfx Agewty Etj New

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Bedsxnp Rxopfx Ag Nscw

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Bcsdsr A D S Eopfx Ag Now Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable