Used Kitchen Carts for sale (823)

Condition: used, Universal 3M-Matic™ Kartonverschließmaschine für den industriellen Einsatz. Manuelle Einstellung der Kartonformate und Antrieb oben und unten. Ausstoß bis zu 30 Kartons/Minute. Pgodsxyt U Sjpfx Abhen

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22/0471, type of input current: AC, total width: 275 mm, total length: 535 mm, total height: 250 mm, input voltage: 230 V, overall weight: 18 kg, The TAPEMASTER® is the electronic wet tape dispenser "Made in Germany". The robust TAPEMASTER® is designed for industrial use and use and meets the highest demands. The precision blade from Solingen reliably cuts paper qualities from 40 g/m² to grid-reinforced tapes. At the touch of a finger on the washable and clearly laid out membrane keypad, the wet adhesive tape is immediately output in the desired length. Even Intermediate lengths can also be selected in 5 cm increments. In particularly cold environments, the switchable heater ensures that the water supply is temperature-controlled water supply and increases the adhesive strength of the tape. Technical data Weight: approx. 18 kg Housing dimensions: 535 x 275 x 250 mm (L x W x H) Paper qualities: from 40 g/m² up to grid-reinforced versions Strip length: 100 - 1450 mm can be called up via 14 buttons with preset lengths lengths, additional "+5" button to increase strip length by a further 50 mm Pjdpfx Asu R Nu Debhsgn extend Strip width: up to 100 mm Made in Germany The TAPEMASTER is produced in Germany and can be serviced in the can be serviced in our own workshop.

Condition: new, Year of construction: 2009, operating hours: 69 h, functionality: fully functional, Mediseal / Körber P-1500 Cartoning Machine for Vials and Eye Drop Bottles – Year of Manufacture: 2009 For sale: a high-quality, intermittently operating, horizontal cartoning machine of the type Mediseal (Klöckner) P-1500, designed for pharmaceutical applications. The machine is suitable for both vials and eye drop bottles as well as comparable primary packaging formats. The system was purchased as new but has never been used in production. Only FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) were performed. With just 69 operating hours, the machine is in virtually as-new condition. Technical Description Pgsdpfx Aex Nx Dajbhon • Max. output: up to 150 cartons per minute • Operating mode: intermittent, horizontal • Product infeed via magazine, starwheel, and product chain • Automatic erecting of folding cartons using vacuum grippers • Automatic insertion of products and package leaflets • Fully automatic leaflet feeder (RonTech) • Progressive carton closing, outfeed to the right • Option for color code embossing on carton flaps Carton Size Range • Length (C): 65 – 150 mm • Width (A): 35 – 90 mm • Height (B): 15 – 95 mm Formats / Flexibility • Currently equipped with format parts for 5 ml, 10 ml, and 15 ml eye drop bottles • Includes all necessary format and change parts • Highly flexible machine, suitable for additional bottle, vial, and product formats • Fast and reproducible format changes Features • Operation via touchscreen (all controls at eye level) • Operating manual in German and French Machine Data • Manufacturer: Mediseal, Körber (formerly Klöckner), Germany • Model: P-1500 • Machine No.: 43 • Year of manufacture: 2009 • Electrical connection: 220/400 V, 3 Ph, 50 Hz • Required space: approx. 6,250 × 2,800 × 2,200 mm • Weight: approx. 3,500 kg Condition • Unused, virtually as new • Never put into production • Only FAT and SAT performed • Only 69 documented operating hours Original price in 2009 • approx. €700,000 - €750,000 with one format set Videos showing machine in operation available Price On request

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: VA050-4GXXX2/FXXWXXXXXXXX, We hereby offer a Nordson gear pump system from 2012. The system will be completely overhauled by us prior to delivery, including coating of the tank and surcharge tank. The system is fully operational. The tank capacity is approximately 50 kg. One gear pump is installed. Pgodpfx Abjwxb Srehsn If you have any questions, please feel free to contact us.

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Psdpfx Aexvy Hmjbhsgn

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, controller model: Siemens HMI Simatic PC FI 15, product height (max.): 150 mm, product length (max.): 100 mm, product width (max.): 85 mm, Fully automatic and continuous high-performance cartoner for packaging bottles, vials, or similar objects, with simultaneous leaflet insertion into folding cartons featuring same-side tuck-in flaps. The system consists of the following components: - Product bucket conveyor - Folding carton conveyor - Folding carton magazine - Leaflet folding unit Podpfjxt Hausx Abhjgn TECHNICAL DETAILS Maximum output: 250 folding cartons per minute Format range, min.: 25 x 15 x 65 mm Format range, max.: 100 x 85 x 150 mm MACHINE DETAILS Control system: Siemens HMI Simatic PC FI 15 EQUIPMENT - GUK 21/4 leaflet folding and feeding unit (4-fold folding possible) - Nordson 3400 V hot melt glue unit - Two plastic hinged plate belts (product bucket conveyor) - Color imprint coding at the coding station

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately Pgjdpfx Abornkwrshon We look forward to your inquiry. Your WS Quack + Fischer Team

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Never installed Qty 2 available Psdpfxsyvutwe Abhegn

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Recently revamped Tube diameter size : 12 – 90 mm Wall thickness : 0,8 – 5 mm Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Pjdjyma Hvjpfx Abhegn Straightening precision: 0,5 mm/m Speed: 100 m/min

Condition: good (used), UDA 150 S - carton feeder or sleeve feeder suitable for mounting a printer or label applicator - widely used in the pharma industry - appears to be in good condition - some spares with the machine and basic wiring details. Pgodpfx Aboxyyz Eehsn READY TO SHIP WORLDWIDE Export documentation and shipping available

Condition: excellent (used), Year of construction: 2012, Soco Case / Carton / Box Taper Fully Stainless Steel Top and Bottom Tape Heads (removable) Pgedpfxjw Rr Dho Abhen Mobile on lockable castors Manual side drive adjustment Manual top head adjustment Tape sizes 28mm to 48mm In excellent condition

Year of construction: 2021, condition: new, Soco Case Sealer, Model T10 Standard Product Specifications • Capacity 30 units/min • Galvanised steel body construction • 50mm high grip side drive belts • Tape width range 32mm 55mm • Top & Bottom tape heads • Manual side drive adjustments • Manual height adjustments Pjdpfx Abogq Nx Uohogn • Three phase power supply • Machine dimensions 1170mm L x 740mm W • 50mm tape overlap on box We supply a full range of Soco Equipment and spare parts

Condition: excellent (used), Soco System Carton / Case Sealer Podpfx Abshlp E Aehegn With top and bottom tape heads Model: T-100 380 V, 3 Ph Plastic roller belt, roller width: (2x) 300 mm Total dimensions: 1540 mm x 800 mm

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Psdpjybtnvjfx Abhegn Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet - seal lid with hot melt glue - index to serialised printing - carton discharge

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING Pgjdsyb Tw Rjpfx Abhon MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: excellent (used), functionality: fully functional, GERNAL 2000L | Tilting brewing kettle with hydraulic tilting (Process kettle with heating jacket) Manufacturer: GERNAL Model / Type: Tilting brewing kettle Working capacity: 2000 liters Internal tank dimensions: Ø 1700 x 1400 mm Overall dimensions: 2300 x 2500 x 2600 mm Heating system: Double jacket Tilting system: Hydraulic Equipment: - Control cabinet - Pallet with accessories This gigantic, industrial brewing kettle with a capacity of up to 2000 liters is an advanced process device designed for food processing plants operating on a large scale. This type of kettle is a key piece of equipment in large meat processing plants, ready-meal factories, fruit and vegetable processing plants, large central kitchens, airline catering facilities, and in the sauce, soup, and culinary base production industry. Pgedpfjy Umuwsx Abhjn The tank construction is based on double-jacket heating technology, which prevents direct contact between the raw material and the heating element. This guarantees perfectly even temperature distribution over the entire surface of the large tank (Ø1700 mm) and completely eliminates the risk of burning thick product batches. The most important advantage of the machine is the automatic, hydraulic tilting system of the working chamber. Advanced actuators, powered by an external hydraulic pump, smoothly and effortlessly rotate the kettle, allowing for rapid discharge of the cooked product directly into waiting butcher carts or onto a subsequent transport and dispensing line.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser power: 3,000 W, sheet thickness (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, feed rate Y-axis: 15 m/min, workpiece weight (max.): 15,000 kg, power: 3 kW (4.08 HP), type of cooling: water, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1503CH Laser Blanking Line | Coil Laser Cutting System 3–6 kW For sale is a SENFENG SF1503CH Laser Blanking Line, a fully automatic coil laser cutting system for processing thin sheet metal directly from the coil. The system combines unwinding, leveling, feeding, laser cutting, and unloading in a continuous production line. It is particularly suitable for manufacturers who want to automate their series production, reduce material handling, and improve material utilization. Psdpst Huugefx Abhsgn Application areas: Suitable for automotive suppliers, switchgear and housing construction, mechanical engineering, construction and agricultural machinery, kitchen and sanitary industries, metal furniture, medical technology, facade and decorative elements, and general sheet metal processing. Processable materials: Carbon steel, stainless steel, galvanized sheet metal, and other suitable coil materials after technical evaluation. Technical data: Model: SENFENG SF1503CH System type: Coil laser cutting system / Laser blanking line Laser power: 3–6 kW Working area: 3000 × 1500 mm Coil thickness: 0.8–3.0 mm Coil width: 600–1500 mm Max. coil outer diameter: Ø 1400 mm Standard coil inner diameter: Ø 508 mm Max. coil weight: 10,000 kg Feeding speed: 0–15 m/min Feeding length: 0–3000 mm Positioning accuracy X/Y: ±0.05 mm Repeatability X/Y: ±0.02 mm Power supply: 380 V, 50 Hz, three-phase Protection class: IP54 Possible equipment / configuration depending on the offer: Depending on the configuration, the system can be equipped with a loading cart, unwinding unit, feed and leveling unit, sheet metal positioning and alignment system, laser cutting unit, CNC cutting system, operator interface, cooling system, safety monitoring, and unloading or material take-up unit, among other features. Optionally, depending on the project requirements, protective film lamination, marking system, safety fence/light curtain, nesting software, and dust and fume extraction can be included. The exact equipment, brands of key components, and optional extensions are determined in the individual offer. Advantages: Fully automatic process from coil to finished cut part Reduced manual material handling High material utilization through coil processing and nesting Precise sheet metal guidance through correction and alignment system Leveling technology for stress reduction and improved flatness Suitable for continuous series production Intelligent CNC control with process database Automatic selection and control of auxiliary gases possible Description: The SENFENG SF1503CH was developed for processing thin coil material. Compared to conventional sheet metal cutting, the system reduces several intermediate steps such as separate unwinding, external leveling, manual loading, and individual handling of sheet metal. The coil material is picked up, unwound, leveled, and then precisely fed to the laser cutting unit. The integrated leveling technology improves the flatness of the material and reduces internal stresses before the cutting process. The system is particularly suitable for companies with a regular need for flat sheet metal parts, recurring contours, and series production. Inspection, technical consultation, and quotation upon request.

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Pedpfjhq Dbmex Abhogn Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Podehq A Txjpfx Abhjgn Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time.

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals Pgjdpoza Rm Tjfx Abhjn ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: new, PRICE: 1800 EUR The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 850× 450× 850mm Pedpfsikvrdox Abhsgn Electrical power: 0.12kW Volume: 60 liter Delivery time: immediately after the advance payment (100%)

Condition: new, The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 1100× 550× 900mm Electrical power: 0.75kW Podpsikvrtsfx Abhogn Volume: 150 liter Delivery time: immediately after the advance payment (100%)

Condition: used, Professional bone saw Kolbe K330 is designed for fast, precise and safe cutting of fresh and frozen meat, bones and larger product pieces in butcher shops, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require strong performance, reliable operation and high cutting quality in daily professional use. The saw provides fast and even cutting thanks to the high blade speed of 22 m/s, ensuring efficient work and precise cuts. It is suitable for processing bones, carcass sections, large meat pieces and frozen products. Pgedpey Izqtofx Abhon Model K330 is equipped with 300 mm wheel diameter and uses a 2490 mm blade, providing stable operation, accurate blade guidance and excellent cutting results. Maximum cutting height is 320 mm, while cutting width is 280 mm. The construction is largely made of stainless steel, ensuring long service life, high hygiene standards and easy maintenance. Stable industrial design makes this model an excellent choice for professional users. Technical specifications: Machine type: Bone saw Manufacturer: Kolbe Model: K330 Power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Blade speed: 22 m/s Wheel diameter: 300 mm Blade length: 2490 mm Maximum cutting height: 320 mm Maximum cutting width: 280 mm Material: Stainless steel Application: Cutting bones, fresh and frozen meat Use: Butcher shops, meat processing, supermarkets, professional kitchens Operation: Fast, precise and reliable Maintenance: Easy and simple

Condition: new, PRICE: 2.900EUR Metzger hobby | Butcher hobby Machine type: Band saw  Kolbe 32 Set-top model  Complete stainless steel body and working table  Adjustable blade tensioner  Caver safety switch  Cover safety saw  Length is adjustable thanks to the standard joinery  System cutting thickness property  Maintenance-free compact design  Dimensions: 60 x 50 x 110 cm  Electrical power: 1.1 kW  Cutting height: 32 cm Disassembled neutral work table with bottom shelf The professional disassembled neutral work table with bottom shelf is designed for restaurants, bakeries, pizzerias, and all food service establishments requiring a stable and hygienic food preparation surface. It provides a practical and functional solution for professional kitchens with limited space. Features: Professional design Stainless steel construction Disassembled structure Bottom shelf for additional storage Pgjdpfey Avglex Abhen Robust and stable build Easy maintenance Technical specifications: Dimensions: 1800x600x850mm Sind Mixer Type: S70 Complete stainless steel  Hopper capacity 70 liter  Single working shaft  Rotation of shaft in both directions  Protection cover  Capacity: 25 kg  Electric power: 2.2 kW  Voltage: 220 V / 50 Hz  Installation dimensions of machine in cm:  Width: 78  Lenght: 61  Height: 74  Manual sausage stuffer Capacity: 7 liters Quality and reliable sausage stuffer It is intended for use in both households and butchers It is light and convenient to use, it takes up very little space The body of the filler, sides, screws, and nuts are made of stainless steel Dimensions: 310 × 310 × 775mm Weight: 13kg

Condition: new, Professional vacuum tumbler with 1000 liter capacity by Sind is designed for marinating, tenderizing and uniform mixing of meat in meat processing plants, production facilities, restaurants and professional kitchens. The vacuum system improves marinade absorption, speeds up processing and enhances texture, flavor and final product quality. The machine is made of high-quality stainless steel, ensuring long service life, high hygiene standards and resistance to intensive professional use. Variable speed control and stable performance allow adaptation to different products and processing requirements. Technical specifications: Podpfxey Enm Ns Abhsgn Machine type: Vacuum tumbler Manufacturer: Sind Capacity: 1000 liters Material: Stainless steel Application: Marinating, mixing and tenderizing meat Working system: Vacuum Speed control: Yes Use: Meat industry, meat processing, restaurants, professional kitchens Operation: Stable, efficient and reliable Maintenance: Easy and simple