Used Laser Welding for sale (7,569)

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Crodpfx Abjxfrv Ej Soh

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Crjdpen Sl D Rsfx Ab Sjh

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). Crsdpfxeh Ad E Uj Ab Soh 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Cedpfx Ajwzv D Ijb Ssrh

Condition: new, Year of construction: 2025, Hand-held laser welding machine Fiber Innovation Laser Laser power: 1500W - 3000W Ergonomic plastic head 2-year warranty! We offer warranty and post-warranty service. We have a stock of spare parts and consumables. From order to commissioning, even in 5 working days! The hand-held fiber laser welder is a modern alternative to TIG and MIG/MAG welding. It is ideal for welding thinner materials and thicker materials using higher laser power. Laser welding results in significantly less heat distortion, up to 4x faster work, ‘ready to go’ welding without the need for additional processing. Achieving a visually good and robust weld is much easier than with conventional welding methods. Welding thin aluminium and stainless steel is simple and trouble-free, unlike the TIG method, which requires a very experienced welder. The ability to feed a wire, or even two wires at the same time, allows larger gaps to be joined and a wide weld size to be achieved. Technical parameters (1500W/ 2000W/ 3000W): -Laser wavelength: 1070 nm ±10nm -Maximum power consumption: 8kW/ 10kW/ 13kW -Cooling system: water-based -Operating voltage: 400v-16A/ 400V-32A/ 400V-63A -Operating voltage. -Melting depth: 0.2-2 mm/ 0.2-3 mm/ 0.2-4 mm - Dimensions: 1000 x 450 x 750 mm - Weight: 80kg/ 90kg/ 100kg The price of the machine includes: ->Installed cooler ->Raycus laser source ->Touch screen panel with menu in Polish ->Ergonomic plastic head ->Single / double wire feeder (optional) Each unit comes with an instruction manual in Polish and a CE declaration of conformity. Credpfjt Al Txjx Ab Sjh We are happy to produce weld samples for the selected workpiece on request. We offer machines with different configurations, working fields and laser power. Please do not hesitate to contact us. The price shown in the offer refers to the version of the CX-CS1500-H (1.5kW) welding machine with a single wire feeder. The actual appearance of individual components may differ from the graphic shown in the offer.

Condition: excellent (used), Year of construction: 2018, operating hours: 7,677 h, functionality: fully functional, machine/vehicle number: 05920917-01.18, The ALPHA LASER ALM 300 laser welder was manufactured in 2018 in Germany by Alpha Laser GmbH. This mobile laser welder is equipped with a 300 W laser source (9 kW laser beam power), allowing for the repair and modification of a wide variety of components such as dies, molds, injection molds, tools, and machine parts at any chosen location. Welding is carried out in semi-automatic mode. The mobile laser welding system features a narrow laser head, enabling access to the interior of the welded component. The machine is controlled via computer, joystick, and footswitch. The machine is in very good technical condition and comes complete with a work table. Price: PLN 230,000 net (VAT invoice issued). Crodpfx Aor Nbmcjb Seh Technical specifications of the ALPHA LASER ALM 300 laser welder: – Power: 300 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 120 x 110 x 800 mm – Pulse energy: max. 90 J – Pulse duration: 0.5–20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2–2.0 mm – Operating mode: pulsed – Focal length: 150 mm – Power supply: 3 x 400 V / 50-60 Hz / max. 3 x 16 A – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 7,677 – Serial number: 05920917-01.18 Additional features and equipment of the ALPHA LASER ALM 300: – Optics: LEICA microscope mount with 10x magnification, optionally 16x – Display with keyboard – Multifunctional footswitch – Joystick – Adjustable laser arm – Complete workstation with table – Possibility to purchase spare parts and accessories at competitive prices, e.g., lamps, hoses, wire guides, balls/bases for parts, magnets, etc. – Possibility to purchase various types of welding wire at good prices – Option to purchase a fume extraction system Additionally, a 200 W machine from 2014 with the same specification is also available!

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Codpfx Ajug Unfob Ssrh Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source from MaxPhotonik - German menu guidance - Universal device for welding / cutting / cleaning - Incl. 4-roller welding wire feed - Integrated water cooling - Immediately available - Leasing or hire-purchase available via our financing partner Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Csdpfevca Nrsx Ab Sjrh we deliver in complete Europe, we have in Europe in 3 locations a sales and service organization.

Condition: new, Year of construction: 2025, functionality: limited functionality, type of input current: three-phase, total height: 1,100 mm, total width: 650 mm, total length: 1,000 mm, overall weight: 230 kg, warranty duration: 24 months, type of cooling: water, material thickness: 8 mm, Glorystar Laser ALL NEW GW-H Series Handheld Laser Welding Machine 1000-3000W GW-H series is a handheld laser welding machine that can be used for welding various metal sheets and tubes. It features fiber laser with 1000-3000W laser power options, capable of cutting stainless steel, carbon steel, aluminum, brass and other metals up to 8mm thick. The machine includes: In good condition, with all manuals and accessories. Available with single or dual wire feeder options MAXPhotonics / Raycus laser source The welding gun features 4 mode functions: welding, weld seam cleaning, cleaning, cutting Integrated cooling system Credpouc S A Eefx Ab Sjh Touch control panel 24-month warranty 4 working modes:Welding，Weld seam cleaning，Cutting，Cleaning Welding head weight: 1kg Cooling method: Water cooling Shielding gas: Nitrogen or Argon Applicable materials: Stainless steel, aluminum, copper, steel, brazing, etc.

Condition: new, Year of construction: 2024, functionality: fully functional, laser wavelength: 1,064 nm, AL, ALM, ALW tilt and swivel optics (KSO), new 1 year guarantee, still packed. Other devices and accessories in stock on request. Sale only within the EU. Laser welding consumables, Lawitex starter pack. As a laser welding wire manufacturer, we can create a wire selection specifically for your wire selection specifically for your requirements, welding parameters are personally customized by us. explained and stored for easy retrieval. We supply original Alpha Laser spare parts, offer application product training and service at very good conditions. We are an official sales partner for Alpha Laser laser welding systems and, thanks to our almost 30 years of experience in the field of welding technology, we offer advanced laser welding technology from a single source. Inquiries, explanatory welding training and instructions (also by telephone) in: German, English and Polish Crsdepcf Ntopfx Ab Seh Supplier Lawitex GmbH 40764 Langenfeld (Rhineland), DE

Condition: new, Year of construction: 2024, Laser welding machine with 200 watt laser power - Lamp-pumped - Spot welding machine for ultra-fine welding tasks - Suitable for jewellery, optics, precision engineering, etc. Crjdpfjflrniex Ab Sjh - Welding spot size from 0.1 to 3mm - For virtually all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshairs - Adjustable current, pulse width, repetition rate, and frequency via control panel - Includes shielding gas connection - Nd3+:YAG laser (metal cavity with xenon flashlamp) - Lamp-pumped Nd:YAG laser with 200 watt output - External cooling - Power supply 230V / 32A Leasing or hire purchase possible through our financing partner Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approx. 150 kg

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 6600 kg This PTR Strahltechnik EBW PS 4-1 60-6 CH was manufactured in 2019. A reliable electrical beam welding machine, it represents an excellent opportunity for those seeking high-quality welding capabilities. Contact us for more information about this machine. Credpfxoxgkb Ao Ab Seh Application Types Welding

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit Cedpfx Abjthit Es Ssrh - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Year of construction: 1910, condition: as good as new (ex-display), Laser Welding Head Laser Processing Head HIGHYAG Laser Technology PDT as good as new from stock clearance, probably never used incl. (everything as shown): Credpfxsf Ucn Ej Ab Sjh - Focusing module 0,75; Lambda = 900-1060nm - PDT Zoom Collimation - Compact SGM 2 - Info Label: HAN: SE05010/1083: V4.9: 90 800 333 Control unit PDT: PDT-D

Condition: new, Year of construction: 2025, Y250 HC10 Laser Laser Welding System Compact, Flexible, Easy to Use - Integrated Robot Controller (YRC1000) - Yaskawa HC10DTP Cobot - Inxpect Radar Sensors / Increased Safety - Easy Mobility with the Pallet Truck - Extremely Simple Programming - Easy to Teach with the Yaskawa Smartpendant - Industrial Mode for Increased Speed Scope of Delivery: 1x Yaskawa HC10DTP Cobot with Integrated Robot Controller (YRC1000), Profinet, and Smartpendant (tablet programming device). Delivered assembled and ready for use on the robot platform. 3x Inxpect Radar Sensors / mounted on the robot platform. 1x Raycus 2kW fiber laser with water cooling 1x Wire feeder for the following wire thicknesses: Ø0.8, 1.0, 1.2, and 1.6 mm. 1x Ospri LWD200 laser head, QBH connector, 75mm collimator, 200mm focal length, water-cooled, including CDD camera and screen. Cedpfx Aow N N Dijb Serh 1x starter set consisting of: 1x Univet laser safety goggles, 5x protective lenses, 5x spare nozzles. Solid robot platform The mobile robot platform consists of a sturdy welded steel construction (250 kg weight) with a powder coating. This allows the robot to run at 100% speed while remaining mobile! Easy to position with the pallet truck. Laser power, power with reserves! Laser power: 1.5 kW - 2.0 kW - 3.0 kW RAYCUS RESONATOR Example: With the 2.0 kW fiber laser source, it is possible to weld steel up to 6 mm, stainless steel up to 5 mm, and aluminum up to 4 mm. The laser is a pure industrial device with water cooling for 24/7 continuous operation. TECHNICAL DATA -Model: Y250 HC10 2KW LASER -Range: 1400mm -Laser Power: 1500-3000W -Total Weight: 350kg -Safety: Inxpect radar sensors -Cobot repeatability: 0.05mm -Wire feed: Ø0.8, 1.0, 1.2, 1.6mm -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm -Cobot power consumption: 1KVA -Base dimensions: L x W x H 950mm x 750mm x 880mm -Water cooling: Yes

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Csdpjw U Ezzefx Ab Sjrh Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: repair required (used), Year of construction: 2004, functionality: unexamined, An Askea laser welding machine with Lasag SLS 200 C60 laser source is available. Laser power: 120J/400W, pulse duration: 0.142ms, wavelength: 1064nm, pilot laser: 630nm-640nm, max. output: 1mW. Documentation available. An on-site inspection is possible. The machine is not operational and requires repair. Crodpfexfkhyox Ab Ssh

Condition: used, functionality: fully functional, Year of construction: 2004, degree of automation: manual, actuation type: electric, Equipment: fume extraction, Trumpf HL 1003D laser unit Credpfxswxq H Ee Ab Sjh Beam quality of 12 mm mrad and a laser power of 1000W at the workpiece. 2 optics with cameras.

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Csdpfow S N Dnjx Ab Sorh Application Types Welding

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: K17483-152-1, arm reach: 1,440 mm, type of input current: three-phase, Yaskawa MA 1440 welding robot with Abicor Binzel iROB pulse 500 welding source , Abicor Binzel welding neck and unrolling device , with Scansonic TH6D , and automatic centering and cleaning station . Cjdevb D Ehjpfx Ab Sorh The equipment is like new , barely used, and used the Scansonic TH6D to self correct during welding .

Condition: new, Year of construction: 2025, functionality: fully functional, LMH-3000 – Industrial Laser Welding Machine – 3000 W Fiber Laser – 4-in-1 Description The LMH-3000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single unit. Building on the proven LMH-1500, the LMH-3000 offers even more power and flexibility with its 3000 W laser source – ideal for thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling system, and ergonomic handheld operation, this machine is perfectly suited for continuous 24/7 industrial use. Technical Specifications Model: LMH-3000 (4-in-1) Laser Source: 3000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber laser Functions: Welding, cutting, brazing, surface treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets, and more Energy Efficiency: Up to 80% savings compared to conventional processes Operation: Ergonomic handheld operation with optional wire feeder Advantages 4-in-1 functionality – versatile applications Higher output (3000 W) for maximum welding speed and material thickness CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal reworking Crsdpfexc Ec Tex Ab Soh Robust design for industrial applications Flexible use in metal construction, manufacturing, and maintenance Special Notes Available immediately from stock in Rheda-Wiedenbrück, Germany. Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Introduction to operation and application available by appointment. Extras & Accessories Wire feed system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts – ideal for workshops, mechanical engineering, metal construction, body shops, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Via freight forwarding (pallet shipping) within Germany and the EU – shipping costs upon request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and receive ready-to-use delivery!

Condition: excellent (used), Year of construction: 2021, X-axis 1,400 mm Csdpev Ixiuefx Ab Sorh Y-axis 3,000 mm Number of axes 10 Laser power 6,000 W Quineo Next 450 A welding system QIROX QRC30-PL welding robot System still powered

Condition: new, Year of construction: 2023, Laser welding machine with 2 Kw laser power, laser components from Siemens welding machine with real CE and thus German manual, risk analysis and everything that belongs to be allowed to operate a laser welding system in Germany. Wire feed case, also with real CE, is also included. An instruction can take place here in the company. Crjdpfjn Sl Dbox Ab Sjh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: L4211M3217, laser power: 5,000 W, laser wavelength: 1,030 nm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, The system consists of two identical laser welding units. The system includes the following components: - Trumpf TruDisk 5001 laser source (laser source for both units) - Trumpf disc laser 12-12-30-A32/11 with focusing optics (PFO) - PRIMES FocusParameterMonitor (FPM) for laser measurement and parameter determination - RITTAL SK 3185830 electrical cabinet cooling unit - HERDING Comp 1500-8/9 SB welding fume extraction system - HERDING Multicoater_MCI 55/1 dosing device (for adding additives in the filtration process) The system was previously used for manufacturing Li-ion batteries (E-Smart). In this process, cell connectors for series connection in cell blocks were welded. The cycle time for cell blocks in the stated production was 3-4 minutes. The system was professionally dismantled in March 2025. TECHNICAL DETAILS Workpiece height: 40 cm Workpiece width: 40 cm Extraction volume for welding fume extraction: 2,000 m³/h Trumpf TruDisk 5001 - Laser power at the workpiece: 5,000 W - Continuously adjustable power range: 120 W - 5,000 W with active power control - Wavelength: 1,030 nm - Minimum fiber diameter: 100 µm Crjdpfx Ajxazzmeb Sjh MACHINE DETAILS Weight per unit: 6,021 kg Weight of the Trumpf TruDisk 5001: approx. 900 kg Weight of the cooling device: approx. 300 - 400 kg Rated current: 20 A Connected load: 12 kVA

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 170 kg, type of cooling: water, input current: 16 A, laser power: 2,000 W, frequency: 50 Hz, continuous power: 3 kW (4.08 HP), Equipment: documentation/manual, type plate available, LMH-2000 – Industrial Laser Welding Machine – 2000 W Fiber Laser – 4-in-1 Description The LMH-2000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single system. Based on the proven LMH-1500, the LMH-2000 offers even greater power and flexibility with its 2000 W laser source – ideal for thicker materials and demanding applications. Featuring an energy-efficient fiber laser, stable cooling system, and ergonomic hand-guided operation, this machine is perfectly suited for continuous industrial 24/7 operation. Technical Data Model: LMH-2000 (4-in-1) Crsdpfoxc Ebcex Ab Ssh Laser Source: 2000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber Laser Functions: Welding, Cutting, Brazing, Surface Treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets and more Energy Efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic hand-guided torch, optional wire feeder Advantages 4-in-1 functionality – highly versatile Increased power (2000 W) for maximum welding speed and material thickness CE compliant according to Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal post-processing required Rugged design for industrial use Flexible applications in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Instruction on operation and application is available by appointment. Extras & Accessories Wire feeding system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts: Ideal for workshops, mechanical engineering, metal fabrication, automotive bodywork, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: By freight carrier (pallet shipping) within Germany & the EU – shipping costs on request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate use!