Used Lms for sale (458)

Condition: new, Year of construction: 2020, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Pgodpjtuwf Ejfx Aahsu Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, weighing systems, double sealing) - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, gusseted bags, single-lip (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Year of construction: 2019, condition: good (used), Year of Manufacture: 2019 Machine Type: Hybrid Digital Inkjet Printer Model: Gallus Labelfire 340 Printing Colors: 8-colour digital inkjet, 1200 dpi Web Width: 340 mm Key Features: - 📌 Hybrid Technology: Combines digital inkjet printing with flexographic printing capabilities - 🎨 Flexographic units: 2 x flexo units Pgodpeutaz Sefx Aahju - 🖌️ Screenprinting Units: Screen printing for high-opacity prints - ✨ Cold Foil Unit: For metallic finishing - ✂️ Die-Cutting: Semi-rotary die-cut system for versatile cutting options - 🌐 Surface Treatment: Corona treatment for enhanced ink adhesion - 🔪 Cutting System: Integrated cutting for finished label rolls Material specifications: - 📏 Supported materials: Mono films (30 - 200 µm), paper (30 - 400 µm), composite materials (30 - 400 µm) - 📦 Spindle Core Diameter: 76 mm - ⚖️ Maximum roll weight: 250 kg Technical and Optical Condition: - Technical Condition: 9/10 (checked and in excellent running condition) - Optical Condition: 9/10 (cleaned and can go to end-user directly)

Condition: used, Year of construction: 1996, Bottle Filler and crown capper, make Krones, type: Mecafill VKV 24/KK 6-94 LM, 24 filling valves, Vacuum pump, hot water injection before closing, Pgjdpeunh I Ajfx Aahou 6 head bottle cap closing, bottle burst control, Crown Cork feeder + bin electr. height adjustment, direction: counter clockwise / right to left.

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. Pgodpswbvhajfx Aahju - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm Pjdoxfvrwjpfx Aahsgu • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: used, New: Yes Podpjxin T Isfx Aahogu Empty weight: 22 kg Part suitable for: trucks SAE75w80 Q8 Q8 Gear Oil V 75W-80 is een onovertroffen synthetische transmissievloeistof en biedt langere verversingsintervallen en de beste prestaties in veeleisende omstandigheden. Dit product vergemakkelijkt het schakelen en biedt uitzonderlijke bescherming bij hoge temperatuur dankzij de constante filmsterkte. De laagviskeuze eigenschappen zorgen voor een efficiënte transmissie en een optimale brandstofbesparing. Q8 Gear Oil V 75W-80 is speciaal ontworpen voor de lange verversingsintervallen van Volvo 97307. Dit product voldoet aan de vereisten van veel OEM's van bedrijfsvoertuigen en/of fabrikanten van versnellingsbakken, zoals MAN, ZF, DAF, IVECO, Eaton, Renault en Volvo. API GL-4 Volvo 97307 DAF ZF TE-ML 01L Eaton/Fuller ZF TE-ML 02L Iveco ZF TE-ML 08 MAN 341 Type Z4 ZF TE-ML 16K Renault Article nr.: Q8GEAROILVSAE75W8020-veiling Gearbox oil Q8 gear oil V SAE 75W80 20L

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Pgjdpowt Sq Ujfx Aaheu Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Pgodpfew Tg Adsx Aahju Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) 1/4 of the new price !!!!! Perfect printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour. The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintennace done in May 2025. Available: August 2025 As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Decomissioning, transport, installation, training and warranty are included (in Europe) Psdsun Swbepfx Aahsgu For further technical details please refer to enclosed data sheet.

Condition: new, Year of construction: 2025, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, CNC Machining Center Power V10 – Stability Meets Performance The Power V10 from the POWER V series by GreMaT is a highly precise and robust CNC machining center, engineered for demanding machining applications. Featuring a wide column construction, reinforced linear guides, and high-performance spindle technology, it is the ideal solution for precise and cost-effective manufacturing. Power V10 Highlights Robust construction – 1320 mm wide column design ensuring maximum stability. High rigidity – LM roller guides with 4×45° roller bearings and 6 carriage blocks per axis. Large working area – X-axis 1050 mm, Y-axis 650 mm, Z-axis 600 mm. High-performance spindle – up to 12,000 rpm, BT40 or *BT50 taper. High productivity – 24-position tool changer (disk arm), max. tool weight 8 kg. Stable foundation – machine weight approx. 8,200 kg for vibration-free operation. Key Technical Data (Excerpt) Feature Specification Table size 1400 × 650 mm Max. table load 1000 kg T-slots 18 × 5 × 100 mm Travel (X / Y / Z) 1050 / 650 / 600 mm Spindle taper BT40, *BT50 Spindle speed 8000 / *10000 / *12000 rpm Spindle motor power 15 / *18.5 kW Axis rapid traverse 30 m/min Tool magazine 24-position, disk arm Dimensions (L×W×H) 3200 × 2500 × 2450 mm Machine weight approx. 8,200 kg Experience it live at EMO 2025! Included Equipment: - Siemens 828D control + drivers + motors - 15'' display with Shopmill functionality - Taiwan linear guides + ball screw - SK40-150 spindle with direct drive, spindle speed: 12,000 rpm - 30 bar through-spindle coolant - Column raised by 100 mm - Tool magazine with 30 positions for disk arm - Main servo motor: 11/15 kW - Air-conditioned control cabinet - Electronic handwheel - Automatic lubrication system - Automatic coolant system - Three-color warning light - Work lamp - USB and Ethernet interface - Foundation pads - Tools and toolbox - CE certificate See the Power V10 CNC machining center live at EMO 2025 and experience its precision, robustness, and performance first-hand. 👉 Secure your free EMO admission tickets now and schedule a consultation! Why Power V10? Pedew Ufprjpfx Aahsgu ✅ CNC machining center for ultimate precision ✅ Stable construction for low-vibration machining ✅ High-performance spindle with up to 12,000 rpm ✅ Immediately available (otherwise approx. 6 months lead time) ✅ Live at EMO 2025

Condition: used, Year of construction: 2003, Machine designed to transform a PVC-free film into a finished, filled, sealed and printed infusion bags for injectable solutions, in sizes from 50 ml up to 5000 ml. Uses PVC-Free films. Meets the specifications outlined in current pharmaceutical regulations, the machine is designed and manufactured with materials in accordance with CGMP and FDA standards. Pgodjxdzx Tjpfx Aahju

Year of construction: 2012, condition: used, Empty weight: 500 kg Part suitable for: trucks Type number: DH-LM.30 DH-LM.30 Occ laadlift DH-LM.30 Dhollandia Pgedpfx Aexh I I Aeahju OEM : DH-LM.30 Article nr.: H400419019-veiling Used loading lift DH-LM.30 Dhollandia 2000kg

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in perfect condition, ready for production. Year of manufacture 2009. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – USB interface – Ethernet interface Pedpswxtdtjfx Aahsgu – Windows CE operating system – Positioning by means of an electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1150 mm Maximum stack height: 165 mm Infeed depth: 1150 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4kW Net weight: 3200 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm Pjdpfx Aaew Tbr Hohsgu A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: used, mileage: 5,60,866 km, power: 315 kW (428.28 HP), first registration: 04/2019, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 10,480 kg, empty load weight: 7,520 kg, tire size: 315/70 22,5, next inspection (TÜV): 12/2025, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, operating hours: 5,60,866 h, tire condition: 40 %, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, number of beds: 1, Equipment: ABS, air conditioning, airbag, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, truck registration, Reference number for inquiries: 40029 Mercedes-Benz, 1843 * Year of manufacture: 2019 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Electric window lifters * Cab * Automatic climate control * Light alloy wheels * Air suspension * Retarder / ZF intarder * Power steering * Sleeping berth * Heated seats * Auxiliary heater * Cruise control * PTO (Power Take-Off) * On-board computer * Differential lock * Storage box / toolbox * ADR GGVS equipment * Digital tachograph * Bluetooth * USB interface * OBU preparation * Refrigerator * Airbag * Electric windows + mirrors * AdBlue tank * Fog lights * Comfort air suspension seat * Multifunction steering wheel * Sun visor * Lane departure warning * Forward collision warning * Inspections: HU (roadworthiness) / AU (emissions) valid until 12.2025 * Transmission type: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 18,000 kg * Unladen weight: 7,520 kg * Payload: 10,480 kg * Perm. gross vehicle weight: 18,000 kg * Tire condition, 1st axle: 40% -- 40% - Tire size: 315/70 R22.5 * Tire condition, 2nd axle: 40%|40% -- 40%|40% - Tire size: 315/70 R22.5 * Tire sizes: 315/70 R22.5 Psdpfx Aaexf Euhehjgu * Dangerous goods ADR GGVS FL AT EX II EX III * StreamSpace flat floor * ADR certification available * Retarder * PTO * Driver's side airbag * LED ambient lighting * Bi-xenon headlights * Aluminium air tanks * Air horn * Dangerous goods version: ADR type FL * G bracket for notebook * 12.7 cm info display with extra function * Automatic climate control * Aluminium fuel tank: 510 Ltr * Leather steering wheel * LM wheels 900x225 (ALCOA matt) * Illuminated Mercedes star * Mounting plate * Reversing warning system (acoustic) * Electric sliding/lifting sunroof (glass) * Fleet management system interface * Driver seat with massage function * SoloStar Concept, sunshade roller blinds side windows * Rear axle differential lock * Medium air unit, fatigue detection sensor * Driver assistance system: Brake assist (Active Brake Assist) * Lane keeping assist * Comfort central locking system * Voltage converter 24V / 12V * CB radio preparation * Additional water heater * Video and more images available on request Disclaimer: Subject to change, prior sale and errors excepted. More pictures and videos are available on our homepage. Our comprehensive services include e.g.: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Provision of export or customs registration plates * Vehicle preparation: new tarpaulins, lettering, painting etc. * Professional loading / load securing * TüV approvals, registration services * Transfer of commercial vehicles Please contact our trained specialist staff. We will be happy to assist you.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fully automatic die-cutting and creasing of paper, cardboard, and films Magnopro I-CUT12090 Year of manufacture: 2022 Latest software including NEW touchscreen control unit from 2024 Connection: 230 V Material thickness depending on model: 10 mm Data formats: PLT, DXF, HP/GL, PDF, EPS Feeder: sheet feeder with vacuum/roll-off device (optional) Max. format: 90 x 120 cm Dimensions (W x D x H): 320 x 150 x 115 cm Alignment: CCD camera system Speed up to 1000 mm/sec Positioning: vacuum belt Dpkktr Programming: barcode reader, QR code Accuracy: +/- 0.1 mm Sheet and roll feeder! Plus 19% VAT For self-collection only Pedswbgm Hspfx Aahjgu

Condition: used, axle configuration: 3 axles, first registration: 05/2004, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2004, Axle configuration Reference size: 385/65 R22.5 Axle brand: SAF Pgjdpfoxgycpjx Aahsu Brakes: Disc brakes Suspension: Air suspension Rear axle 1: LM rims; Tire profile left: 30%; Tire profile right: 30% Rear axle 2: LM rims; Tire profile left: 20%; Tire profile right: 20% Rear axle 3: LM rims; Tire profile left: 15%; Tire profile right: 15% Weights Unladen weight: 9,330 kg Payload: 30,670 kg GVW: 40,000 kg Vehicle condition Damage: none

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: Flowpack, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Pedpfx Aoq Ikfmoahegu Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Condition: excellent (used), functionality: fully functional, empty load weight: 600 kg, Year of construction: 2014, load capacity: 1,500 kg, We hereby offer, subject to prior sale, a used universal cable reeling machine / electric ring coiling machine with length measuring device, suitable for respooling and winding cables onto different drum diameters. Manufacturer: Vetter GmbH, Germany Type: Cable Length Measuring Unit LM 20 (suitable for insulated cables) Year of manufacture: 2014 Usable cable diameter: 1 - 20 mm Dimensions of cable length measuring unit: 360 x 280 x 400 mm (L x W x H) Weight of cable length measuring unit: 13.3 kg Type: Cable Winding Unit TR 146 FH Year of manufacture: 2014 Load capacity: 1500 kg Usable cable diameter: 1 - 20 mm Measuring accuracy: Class III, +/- 0.5% at 5 - 40 °C Minimum measuring length: 5 m Reel diameter: 600 – 1450 mm Reel width: 350 – 850 mm Drive power: 2.2 kW Torque: 475 Nm Winding speed: 15 - 80 m/min Machine dimensions: 2470 x 1950 x 1885 mm (L x W x H) Machine weight: approx. 600 kg Note: The above technical details were taken from the operating manual, manufacturer's brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: - Universal cable respooling machine - Cable length measuring device - Swivelling roller guide for dispensing from higher cable racks - Holder for overhead power supply - Machine documentation (available in German only) Field of application and condition: The system is suitable for respooling (winding) energy cables, communication cables, and data cables from drum to drum. The cable length is measured during the winding process. The system remained in operation until the end of 2024, is fully functional, and in good condition. Sale is subject to prior sale, on a bid basis, without warranty or guarantee, against advance payment, ex works. We would be pleased if this machine is of interest to you and look forward to receiving your purchase offer. Pjdpfxovl Hpks Aahsgu Your service team, Mertens & Frowein GmbH

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: Podpew Ryt Djfx Aahsgu -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Year of construction: 2005, condition: excellent (used), Control: Siemens 840 D Travel distances: X-260 mm; Z-610 mm Speeds: Main spindle 0-5000 RPM; Sub-spindle 0-7000 RPM C-axis Y-axis 80 mm 12-station turret, all driven Tool holder VDI 30 Speed of driven tools 0-5000 RPM Bar passage 65 mm Accessories: Hainbuch collet chuck on main and sub-spindle Part catcher Chip conveyor Pgsdpfeppyryjx Aahju Emco loading magazine LM 1200 Various tool holders

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Pgsdowy U Nmopfx Aahju Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: used, mileage: 5,44,911 km, power: 294 kW (399.73 HP), first registration: 04/2017, tire size: 315/70 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, cruise control, spoiler, = Other options and accessories = - CD player Podpfx Asxgxqxoahsgu - Roof spoiler - Double fuel tank - Electric exterior mirrors - Aluminum fuel tank - Refrigerator - Alloy wheels - Headlights - Visor - Alternating current - Toolbox - Central locking = More information = Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: LM rims; Steered; Tire profile left: 20%; Tire profile right: 20%; Suspension: Leaf spring Rear axle: Double tires; LM rims; Tire profile left inside: 25%; Tire profile left outside: 25%; Tire profile right inside: 25%; Tire profile right outside: 25%; Suspension: Air suspension Curb weight: 7,668 kg Payload: 11,332 kg GVW: 19,000 kg Damage: none

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: V1 01HUNG60KET9ESGRBMSZ601W, ! short delivery time, under 10 weeks ! !! We are happy to advise you !! Model name: Rotection Box-Motion U Production orientation ////: Horizontal Conveyor system ////: Chain conveyor belt, length as desired Film feed ////: from below Form shoulder ////: flexible and fixed Operator display ////: 10" touchscreen with memory functions, swiveling through extension arm for comfortable operator handling Drives & control ////: 9 servo motors and PLC control Packaging length ////: 200-600 mm Packaging width ////: max. 250 mm (depending on film width) Packaging height ////: max. 120 mm (depending on forming shoulder) Speed ////: 10-60 bags/min. Film width ////: max. 600 mm Pjdpfxeq Ikgys Aahogu Consumption ////: approx. 9 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 1500 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: 304 stainless steel Print mark sensor ////: Yes External compressed air required ////: Yes Printer holder ////: for an additional charge Delivery time ////: Current delivery time under 10 weeks Features: • Box motion end seal • Steel frame / stainless steel construction • Splice function, dependent on material and speed • Fixing of the unwinder by hand without compressed air • Automatic roll centering for precise application • Automatic stopping for empty products (no product - no bag) • Simple touchscreen operation using color symbols • Continuous feeding of products through sensor control • Print mark sensor included • Safety protective covers • 3-sided weld seam packaging (fin seam) • Longitudinal welding on the underside of the bag • rotating cross-welding system • can be combined with upstream and downstream machines • customer-specific changes / designs on request Additional options (on request and for an additional charge): • thermal transfer printer e.g. best-before date, print width up to 60mm • stainless steel finish / varnishing • cooling applications for ice cream packaging • zig-zag knife, euro hole stamp etc. • applications for shrink films (flow shrink) • gassing units for protective atmosphere (extend product shelf life) • automatic product feed systems, cyclical insertion systems • perforation units (tear thread) for easy opening • length-dependent product processing through photocell query

Condition: not inspected (used), functionality: unexamined, Good day, various machines and containers are available for sale, including: - Robust film cutting system - Thermoforming machine for films and molded parts - Factory-new agitator and storage tanks between 300-1500l with motor and control unit - 20l planetary mixer - Powder mixer and much more The attached images show only a small sample. - Various laboratory devices - Yale heavy-duty pallet truck, 3 tons - Brabender Technologie bag dump station - Further battery-specific laboratory equipment If you are interested in one or all of the items, we should simply arrange an on-site appointment! Pjdpevl Hntofx Aahegu