Used Load Cell for sale (36,116)

Condition: used, Conveyor Belt, Belt Conveyor Belt, Conveyor Belt, Belt Conveyor, Chain Conveyor, Pallet Conveyor Belt, Pallet Conveyor -Drive: geared motor SEW-Eurodrive with brake 0.55 kW/15 m/min -Weigh cell: Bizerba HLC-C3 -Chain track width: 750 mm Tsdjgnnb Sepfx Abzsd -Dimensions: 1995/990/H480 mm -Weight: 334 kg

Condition: like new (used), Year of construction: 2024, Capacity: 2.500 kN Specification: Threshold setting: Reading begins at 1% of capacity (75 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (3.750 kN) Sampling rate: Three measurements per second Tedpfx Aefpwmpjbzsd Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 185 L x 200 W mm, height app. 127mm Height sets to 5.0000" +/- 0.0005" Weight: app. 13 kg inckuding carrying box

Condition: ready for operation (used), Condition Used Stock Number 412957 This listing is for a Instron 2518-807 Tension/Compression Static Load Cell. The unit is in full working condition and is ready for immediate release. The Instron 2518-807 Tension/Compression Static Load Cell is engineered for high-precision force measurements in a variety of testing applications. Its robust design allows for accurate tension, compression, cyclic, and reverse stress testing, making it an essential tool in materials testing and quality control environments. Key Features: Capacity: Measures up to 100N (22 lbf), making it suitable for a wide range of testing scenarios. Exceptional Measurement Range: Capable of capturing accurate force measurements down to 1/500th of its capacity, ensuring precision in all applications. Automatic Recognition: Features an electronic serial number and electrical calibration, allowing for simple and error-free operation without the need for manual setup. Integral Overload Protection: Designed with overload protection to minimize the risk of damage during both handling and testing, enhancing durability and reliability. Tare Weight: Offers a tare weight capability of 40% of the force capacity, which accommodates the use of various grips and fixtures for added versatility. Compliance with Standards: Fully compliant with international force measurement standards, including ASTM E4, ISO 7500-1 class 0.5, and JIS B7721, B7733, ensuring reliability and accuracy in testing protocols. Compatibility: The Instron 2518-807 load cell is compatible with various Instron testing systems, including the UT and 3300 series. Its versatility makes it ideal for applications in: Materials Testing: Todpjvi Auqefx Abzjd Perfect for assessing the mechanical properties of materials under tension and compression. Quality Control: Utilized in industrial settings to ensure product consistency and adherence to specifications. Research and Development: An essential tool for scientists and engineers conducting experiments on material behaviour under different loads.

Year of construction: 2010, condition: used, Shear beam load cell Todpfx Abedkpa Sezsd -Nominal load: 500 kg -Nominal value tolerance: %+/- 0.1 -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Tsdpfxofpwk Re Abzjd Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output

Condition: used, Load cell, double bending beam load cell -Nominal load: 100 kg -Accuracy class: C3 -Cable length: 3 m -Material: stainless steel -Protection class: IP 68 -Dimensions: 39/120 mm Todpfxod Al Hio Abzjd -Own weight: 0.4 kg

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Tedpfxewq Sz Ue Abzsd Qty 2 in stock Capacity 500 LTS Load cells Mixer Ancillary equipment included

Condition: good (used), Year of construction: 1998, functionality: fully functional, punching force: 30 t, total height: 2,800 mm, total width: 7,000 mm, total length: 12,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, working range: 2,000 mm, type of input current: three-phase, workpiece weight (max.): 150 kg, overall weight: 12,000 kg, table width: 1,250 mm, table length: 2,500 mm, compressed air connection: 6 bar, input voltage: 110 V, Equipment: safety light barrier, Turret punch press Muratec wiedemann Vectrum 3046α + Cell loader F1-1250 Machine is in good working condition. Possible to see. Machine available latest Oktober 2026. --- The VECTRUM-3046 Alpha is a servo hydraulic CNC turret punch press, which incorporates MURATECs indigenously designed servo hydraulic cylinder that allows the operator to set the desired punching speed and positioning of the ram for greater punching control. The VECTRUM-3046 Alpha enables high speed processing, quiet operation, and outstanding quality parts production at the Todpfexm Rkksx Abzod same time. --- Features: - High speed processing : Punching: 400 HPM, Nibbling: 1000 HPM - High precision processing of +/- 0.07 mm - Quiet punching due to optimised control of ram speed - Largest capacity tool - 121 mm (4.75) - Punching capacity 30 Ton [33 US Ton] - Maximum sheet thickness 6.35 mm [0.250] - Maximum sheet size puncheable without repositioning (Y x X) 1250 mm x 2000 mm - Maximum sheet size possible to autoload/unload (Y x X) 1250 mm x 2500 mm

Condition: used, tank capacity: 885 l, Location: Bremen Condition: used Capacity: 885 liters Vacuum: 1.0 bar Max. Overpressure: 3.0 bar Tank Max. Operating Temperature Tank / °C: 130 °C Design: suspended Heating/Cooling: available Double Jacket Volume: 35.0 liters Max. permissible operating overpressure: 6.0 bar Heating/Cooling Jacket Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Max. permissible operating temperature: 140 °C Cylinder temperature control: half-pipe coil Heating/Cooling Jacket Bottom temperature control: half-pipe coil Insulation: present Insulation Insulation material: mineral wool Internal diameter: 1,000 mm Cylindrical height: 864 mm Tsdpfx Abjxqamvjzjd Technical Data / Dimensions Wall thickness ends: 4.5 mm Wall thickness cylinder: 6 mm Technical Documentation: Drawing, various documents Equipment Manhole / dome: on top (DN 500) Nameplate: Equipment: crane lugs Equipment Outlet (alternative entry): 55 mm Remarks: The tank was previously suspended by the former owner in a ring with load cells, which was embedded in the floor (one ring per tank is included in the scope of delivery; see photos); outer diameter in the ring approx. 1,540 mm; insulation jacket made from material 1 Last application: pharmaceuticals Product-contact material: V4A 1.4435 (AISI316) Material Specifications Temperature control system material: V2A 1.4541 (AISI304) Agitator Agitator manufacturer: MAVAG AG Power: 0.55 kW Speed: 416 rpm Agitator: magnetic agitator Agitator Voltage: 230/400 volts Agitator arrangement: bottom-mounted Agitator features: Agitator data taken from one of the two tanks, the second tank has no motor nameplate (we assume the agitator data is identical); various technical documents for the magnetic agitators

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake BendMaster Robotic Bending System Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Tedpfxjxdfqme Abzjd Press force: 130 tons Bending length: 3,250 mm Year of manufacture: 02.2016 More information and video available on request ...

Year of construction: 1960, condition: used, centre distance 1200 mm 550 weight of the machine ca. 2,5 t Todpsqwpwhjfx Abzod multifix

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 Tedpfx Absurt Tlszod docs available ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Tjdpfsw Eilyox Abzjd Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Tjdpfx Abot Hw D Dszsd Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1960, functionality: limited functionality, machine/vehicle number: 410/25 1960, EX Cell O GmbH DLZ 400SL 1050 lathe. The machine is operational (but has not been used for several years). Tsdpfsw H Svcjx Abzjd On-site testing is possible. Shipping available (costs depend on distance in km).

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm Tedpfsuhznbox Abzod X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Condition: used, color: other, Empty weight: 4 kg Tjdpfx Abenkanbezed Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Tsdsd Nw Ttjpfx Abzod Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: used, color: other, Empty weight: 3 kg Tjdpfep Atgxox Abzod Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 3 kg Tsdop Atgqspfx Abzsd Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 3 kg Tsdpfspyhcvsx Abzsd Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: good (used), functionality: fully functional, empty load weight: 9,500 kg, maximum load weight: 27,300 kg, overall weight: 36,800 kg, axle configuration: > 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 50 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, Used low-loader semi-trailer with cradle bath, fitted with Bertoja winch, 3 twin-axles with 2nd and 3rd self-steering, air suspension, ABS, year 1998, central cradle with 5.50m effective loading length, loading height from ground 50cm, removable cover over axles, electro-hydraulic winch with hook on neck, aluminium sideboards on neck, stake pockets on deck and 8-ton lashing rings, provision for removable rear ramps, serviced until 30.04.2026 – DEALER INTERDRIVE SRL – PARMA Tedpjxgumpofx Abzed

Year of construction: 2014, condition: ready for operation (used), This TRUMPF TRUBEND CELL 7000 was manufactured in 2014. It's a high-speed automatic bending system, ideal for small to medium-sized sheet metal parts. Features include a press brake, robotic handling, and an integrated feeding system. The machine is in excellent condition, comes with a large set of bending tools, and is ready for loading. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 7000 machine we have for sale. Contact us for more information. Todoxtq Uiepfx Abzsd Application Types Bending

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: RF5060-5-2021, Year of construction: 2021, Bradman Lake SL80 Semi-Automatic End-Load Cartoner • Speed: up to 80 cartons per minute Todpfxjxqmmpj Abzod • Carton Size Range: A 50–254 mm | B 19–76 mm | C 140–304 mm • Feed: manual loading area for 2 operators • Glue System: Nordson ProBlue 4 hot-melt unit • Construction: stainless steel frame & panels, hygienic design, CE compliant • Vacuum Pump: Busch • Features: SIKO digital readouts, inverter drive, castors for mobility

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand SIEMENS Model 840D Additional Equipment HERDING Fume extraction in working area: 2000 Nm3/h Cooling unit Automatic sliding door "CE" Automatic two-level redundant working range protection "CE" This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information. Application Types Tjdpjxn U Ezofx Abzjd Cutting