Used Lorch Saprom 905 for sale (18)

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet Isdpfsxyh Ndjx Ab Isa >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: good (used), Year of construction: 1969, operating hours: 9,999 h, functionality: fully functional, Used high-precision lead and feed screw lathe Model: B30 LZB Year of manufacture: 1969 Center height: 120 mm Ijdpfx Abow Rrwhe Ioa Distance between centers: 560 mm Spindle bore: 30 mm Max. swing diameter: 250 mm Speed range: 30-3000 rpm

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, machine/vehicle number: 20225204645, arm reach: 1,300 mm, type of input current: three-phase, feed length X-axis: 2,000 mm, load capacity: 12 kg, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 12 kg, hose package length: 3,500 mm, protection type (IP code): IP54, working range: 1,300 mm, Lorch welding robot UR 10 e-Series with Cobot Move travel axis including Lorch S5 SpeedPulse XT RoboMIG FullProcess featuring a Lorch Cobot torch LMR 450 W 3.5 m, Lorch Con-nect weld data monitoring, Lorch Cobot Move travel axis, multifunction flange, including the following software package: Extended weaving, interval welding, Quick-Points – programming via multifunction flange, Smart Copy – direct copying or moving of parts, Extended assistant – user-specific parameters, Seam-Tracking – intelligent seam tracking, without welding table (available on request) Iedpfsw Ilmqsx Ab Iea

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation Iedpexf Uwxjfx Ab Isa - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 36 months, type of cooling: air, welding current at 60% duty cycle: 300 A, welding current at 100% duty cycle: 250 A, welding current (min.): 25 A, welding current (max.): 350 A, Lorch MicorMig Mobile 350 25-350 AMP 380/400 Volt 100% ED at 250A 60% ED at 300A ControlPro Display Weight: 35KG Including: Lorch ML3600 4 Meter welding torch, 4 Meter 50mm² Earth work cable with Spring clamp, Gas hose, 1,0-1,2mm FE Wire-feed rolls, and 3 Years Warranty Experience the new MicorMig Mobile. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Ijdjxrrykspfx Ab Iea All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2000, condition: used, ampere 29,5 protection P 31 fabric-no. 812122 Iodpfevu Hk Hox Ab Ioa frequency 50 Hz weight 300 kg

Condition: excellent (used), Year of construction: 1970, turning length 300 mm weight of the machine ca. 0,4 t Iodpfx Aoxmahlsb Isa

Year of construction: 2012, condition: as good as new (ex-display), Round 50 with MIG/MAG preparation consisting of: - Rotary tilting table Turn50 - three-jaw chuck 200mm with centering fixture - Attachment kit quill with manual operation - welding cable 50mm² Ijdpfx Aoiby Najb Iea - Attachment set circular weld 1 (cable set+initiator) - Base frame with mounting kit for torch stand and integrated magnetic stop - Torch stand Fix50/50 1000/500 F/H Stand tube 1000mm extension arm: - Tube spindle unit 500mm - - Burner fine positioning 3x50mm with tube connection piece - Ball joint KG1 Universal torch clamp with indexing - 37/38mm for MIG/MAG automatic welding torches - Control 12 Automation control with integrated control panel - LorchNet connection cable 1m 2 x M12 Connector

Year of construction: 2021, condition: used, current capacity - kVA number of controlled axis - workpiece weight - kg Used Lorch Cobot Welding Package CB3 series incl. PushPull torch + rotateOne rotary positioner Cobot operating hours: 334 hours. Features/Description: - Optimal for aluminum applications - Complete set of Cobot and Lorch welding equipment - For mounting on welding tables with hole size 16 or 28 (welding table not included). package included) - Welding system with special cobot interface, full-process equipment and Cooling system with increased cooling capacity, can also be used as a manual system if required - PushPull Cobot burner with 3.5 m hose package length and dual-circuit cooling - Burner original equipment set for aluminum 1.0/1.2 mm - Boom boom with balancer and line holder for optimal hose parcel handling *Technical data Welding range (in A) 25-400 ED 100% 40°C (in A) 320 ED 60% 40°C (in A) 350 ED at max. current 50% - RotateOne rotary positioner with 200mm 3-jaw chuck - integrated into the cobot control (no additional control) Isdperr Amiefx Ab Ioa *Technical data Rotation speed up to 90°/s Load capacity 120 kg Torque up to 45 Nm Tilt angle -10° to 90° (manual) Important: The machine offered is an incomplete machine according to Machinery Directive 2006/42/EC, Article 2g. A protective device in accordance with country-specific guidelines is required. The machine integrator therefore has to create all the necessary documents Additionally: (optionally available) - SIEGMUND welding table

Condition: ready for operation (used), range of control: 30 - 300 A max. welding circuit 60% ED: 240 A max. welding circuit 100% ED: 180 A Ijdpfx Aowvixujb Ioa electrical connection: 400 V kW space needed: 1050 x 450 x 810 mm weight: 132 kg

Condition: used, Year of construction: 2021, functionality: fully functional, We are the official COBOT Partner of LORCH Sweisstechnik GmbH. in Hungary. LORCH Cobot PushpullTIG + MIG/MAG DEMO Welding System (2 in 1) The system is used, used as a DEMO system. 2 in 1 system Can be used as either MIG/MAG or TIG system. The system includes: • UR 10CB 3 robot arms • LORCH COBOT MIG/MAG welding system • LORCH COBOT PushPull TIG welding system • EN 14732 Cobot machine operator international certification (for 1 person, valid only for Hungary) Iodpswnc Aqefx Ab Iea • Siegmund welding table is optional, the price does not include • The price does not include the cost of delivery and training Contact us for details!

Condition: ready for operation (used), Year of construction: 2020, An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible. Ijdpfx Aev Rfq Dsb Isa

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 449607-1-1, type of input current: AC, With E-Learning Lorch ArcWorld RS Mini Package includes: ArcWorld RS Mini cell Lorch S5 RM-XT B/W welding machine (ArcWorld) * Position has the following configuration: Yasakawa ArcWorld version Unit system SI unit, mm Power source variant Power source with 1 case Characteristics System Full process Pulse process SpeedPulse + SpeedPulse XT process Synergic process + SpeedArc XT SpeedArc additional process Additional process SpeedCold Additional process SpeedRoot Ijdet Dzxyjpfx Ab Ioa Additional process Speed-TwinPulse + TwinPulse XT Additional process SpeedUp Additional process TwinPuls Water cooling Extended water cooling without Operation Control panel in power source Case RF-06 (Euro-ZA) DV castors Case 1.0/1.2 mm steel Robot holder Case YASKAWA ArcWorld Wire guide connection Case Quick release coupling Wire feed without Wire feed without Additional plug for torch control cable Intermediate hose package standard 5m Intermediate hose pack cross-section 70 mm² Intermediate hosepack holder without Robot interface Ethernet/IP Cable for robot control EtherNet, 5m LorchNet rear LorchNet front Chassis / base feet for ArcWorld cell Mains connection with plug Length of mains cable Standard Dust filter Dust filter fleece Language setting Operation DE - German Language Documentation Multilingual Standard packaging Torch cleaning station TCS-D with wire cutter Workpiece cable 95 mm², 4 m, cable lug M12 Hose package, consisting of: Torch neck LMR 2 - TN 6 CTC W, 45° LMR 2 - HP 10-W (CR) package, 1.50 m Starter set Accessories

Condition: new, functionality: fully functional, carefree package for your welding automation. Whether MIG-MAG or TIG. Would you like to automate your welding production with a cobot to master your challenges? Then the Lorch Cobot Welding Solutions are just right for you! The perfectly coordinated package combines - high-quality robot technology from the cobot market leader Universal - innovative welding technology from Lorch - intuitive Lorch Cobotronic operating software - and a comprehensive range of services with the best professional support. This makes the Lorch Cobot Welding Solutions a truly all-inclusive package - available for highly efficient MIG-MAG applications as well as for highly demanding TIG welding tasks. THE COBOT: EASY TO INTEGRATE INTO YOUR WORK PROCESSES. Thanks to lightweight construction technology and integrated safety solutions, cobots can be used in direct interaction with humans. With the Lorch Cobot Welding Solutions, you get a first-class collaborative welding robot with a generous reach, sufficient payload, low-maintenance engineering and sophisticated technology. That's what's inside: SIMPLE OPERATION. Thanks to the touch display and intuitive user interface, the Cobot becomes a self-explanatory automation tool for your employees. HIGH PRODUCTIVITY. The basics of cobot welding are quickly understood - a two-day training course teaches everything about commissioning, operation and welding functions. SIMPLE PROGRAMMING. Ijdpfx Abjruml So Ioa With the free-drive function, the cobot is shown by hand where it should weld - including intermediate waypoints and sections. UNIQUE SOFTWARE FOR MAXIMUM CONVENIENCE AND EFFICIENCY. Lorch Cobotronic makes the difference. What sets Lorch Cobot Welding Solutions apart from other cobot solutions is the optimized software. It has been perfectly adapted to the welding technology by our experienced welding experts - to increase the efficiency of your production through maximum user-friendliness and intuitive handling. The multi-talented Cobot UR10e. - 1,300 mm working radius - 12.5 kg payload - Very small footprint - short amortization time - Numerous plug & play accessories - Power source: Lorch S5 RoboMIG XT or Lorch V30 RoboTIG AC/DC Spot repetition accuracy: 0.05 mm Degrees of freedom: 6 +/- Joint rotation: 360 Mains voltage: 230 V OPTIONAL: THE PERFECT ADDITION: The Cobot Turn 100 A rotary tilting table always ensures the optimum welding position during cobot welding. The exact positioning can be specified for each weld seam in the program sequence. This leads to an increase in quality, a gain in productivity, more flexibility and saves valuable time - even for demanding welding tasks and circumferential seams. MORE WORKING SPACE AND MAXIMUM FREEDOM: The Cobot Move linear axis is THE addition to further increase the working space of the cobot. The Cobot remains highly precise - this is ensured by the high-quality ball screw drive installed in the linear axis Move, so that the welding quality remains constant across the entire working area. the autopilot for cobot welding: Whereas with conventional programming, all paths must first be specified and then followed by the Cobot, the Cobot SeamPilot finds its own way.

Condition: new, We are a Lorch Cobot partner and will be happy to advise you on all aspects of automation. Set us tasks, bring your components to a joint appointment and we will plan an automation for you. The all-inclusive package for the automation of small and medium series. With the Lorch Cobot Welding Package, you don't just get a cobot - you get everything you need to make your team stronger: Ennobled by our innovative welding technology, paired with our intuitive operating software and thanks to our service offerings, the Lorch Cobot Welding Package is the all-inclusive package for medium-sized welding automation. Isdpjguqnzjfx Ab Ija

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 215 mm, total width: 130 mm, total length: 360 mm, overall weight: 7 kg, warranty duration: 12 months, type of cooling: air, product height (max.): 10 mm, welding current at 60% duty cycle: 150 A, welding current at 100% duty cycle: 130 A, welding current (min.): 5 A, welding current (max.): 200 A, - Tested used device in very good condition directly from the manufacturer - - Several devices available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (including gas management, high-frequency ignition and electrode welding function). All-in technology for power grid, generator and battery - "3 steps and weld" operating concept - Simple one-button operation - Continuous current setting - Ampere-accurate digital display - With graphical user guidance in the OLED graphic display - Maximum customization thanks to detailed welding sequence control - Job memory for 10 welding tasks Current new price (02/2025): 2,277.00 € plus VAT Scope of delivery: System including removable power cable, carrying strap, gas hose and operating manual THE MicorTIG SERIES. THE POWER PACKAGES FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional welders: The welding machines in the MicorTIG series from Lorch are the ultimate TIG machines for assembly use, but also for the workshop - suitable for steel and stainless steel. Whether for production or repair, with or without a power socket on site: The MicorTIG series improves the work results of TIG welders around the world - and makes their everyday life easier. Quite literally: At just 6.8 kg, you can easily take your Lorch MicorTIG welding machine with you anywhere - including accessories in the assembly case. Small but powerful: With the patented MicorBoost technology, the welding machines in this series get 200 amps from any normal power socket. INTUITIVE OPERATION. Thanks to the ampere-accurate digital display and clearly structured user interface, intuitive and at the same time very precise operation is possible. Also optionally available: an operating concept using a graphic display. NON-CONTACT HF IGNITION. TIG ignition is contactless with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, there are no inclusions in the seam and the electrode is protected. Ijdpfxevxid Ro Ab Ija PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse function up to 5 kHz is particularly suitable for processing thin welding sheets. It enables outstanding melt pool control and perfect results even with difficult welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save the parameters of up to 10 welding tasks and call them up quickly when required. Recurring tasks are completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. Lorch's MicorTIG welding machines are suitable for every electrode type and offer a convenient preselection for CEL and standard electrodes. Even special electrodes are no problem. During welding, the arc force control takes effect and ensures arc stability and perfect material transfer. The anti-stick system prevents the electrode from sticking or burning out. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE SOCKET. The patented MicorBoost technology provides enormous voltage reserves and regulates the TIG arc in an extraordinarily stable, controllable and precise manner – even with fluctuating mains voltage. This allows you to weld with up to 200 amps from a regular socket.

Condition: as good as new (ex-display), Lorch turntable with torch holder Type: TURN TT 370 HO MOT IC Ijdoi Dtmbjpfx Ab Ioa Please refer to the table for technical data.

Condition: as good as new (ex-display), Lorch turntable TURN 50 with counterpressure quill and control system Isdpfxsi Dtqfo Ab Iea