Used Mep Shark 282 Ccs for sale (113)

Condition: new, Model Name Bledsgvkbcspfx Abcoc Shark 282 CCS

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) Bsdpfx Abjxaarkecjlc - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension Bjdoxabpwspfx Abcslc * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: as good as new (ex-display), Year of construction: 2024, saw band length: 2,950 mm, saw band width: 27 mm, type of input current: DC, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, cutting height (max.): 285 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Bodpoxyywmofx Abcolc Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg dimensions of the machine ca. m Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Blsdpfjfg E H Nsx Abcec Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision Bjdpfx Aboftmxvjcolc * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, saw band dimensions 2950x27x0,9 mm 2 speeds 36/72 m/min vice opening 285 mm cutting range at 90 degrees: round 250 mm cutting range at 90 degrees: square 230 mm Cutting range at 90 degrees: flat 280x200 mm Cutting range at 45 degrees: around 190 mm Cutting range at 45 degrees: square 180 mm Cutting range at 45 degrees: flat 180x180 mm Cutting range at 60 degrees: around 120 mm Cutting range at 60 degrees: square 110 mm Cutting range at 60 degrees: flat 110x110 mm Total power requirement 1,5/1,8 kW weight 375 kg Blodpfx Abeh Dmh Hecoc Dimensions 1700x1000x1650 mm Equipment: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the saw bow by the by the weight of the saw head. - The lowering speed is infinitely variable. Single cuts can thus be be carried out with uniform feed

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band Bodexz Hhzjpfx Abcslc -Schipping brush for cleaning the saw band

Condition: new, Model Name Shark 281 CCS Bledpfx Aogvkchsbcec

Condition: new, Model Name Bedjgvquwspfx Abcolc Shark 332-1 CCS

Condition: new, Model Name Bljdpfogvkctex Abcec Shark 282 SXI evo

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering Blodsxaa H Iopfx Abcoc * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) Bljdpfxsxaaqte Abcsc - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Bedoxaa S Rspfx Abcjlc Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min Blsdpfx Aoxaatbsbcjc dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, MEP SHARK 332-1 CCS metal band saw with semi-automatic lowering. MEP authorized dealer - please send us your inquiry! Motor power 1.5/1.8 kW Bench opening 335 mm Blade dimensions 3650 x 27 x 0.9 mm Weight 640 kg Speed 40/80 m/min. Cutting area 0° 300 / 260x260 / 330x260 Cutting area 45° right 260 / 250x250 / 270x200 Cutting area 45° left 200 / 180x180 / 200x160 Cutting area 60° right 180 / 170x170 / 170x170 Cutting area 60° left Description of the MEP sawing machine: Functioning in CCS version: After the material has been advanced and the vices have been closed, the cutting process begins. The lowering is controlled by the saw's own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for feeding the material. Electrical control panel (marked cable connections, operational readiness indicator light, main safety switch provided with padlock, switch or speed selector, emergency stop, thermal magnet protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick-lock mechanism Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (accessory). Bodpfocgbt Rex Abcslc Electric coolant pump for cooling and lubricating the saw blade. Chip removal brush Adjustable precision stops for making cuts of consistent length. The machine is designed for pallet truck transport. Bimetal saw blade for solid and profile material Tools and operating instructions Motor 1.5/1.8 kW 2 speeds 40/80 m/min. Vice opening 335 mm Saw blade 3650 x 27 x 0.9 Weight 640 kg See image for cutting data For further technical data, please refer to the attached PDF document.

Condition: new, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Item number: SH281CCS motor power 1,5/1,8 kW band opening 285 mm band dimensions 2950x27x0,9 mm weight 375Kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230/ 280x200 cutting area 45° right 190 / 180x180/180x180 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description: -Saw band arch, vise unit and base made of resistant cast iron. -Precision degree marking on the cast iron structure -Electrical system (with fully identifiable electrical wiring and low voltage 24 V system) -Switching handle IP 55 for manual cycles (if present) -Rotating scraper brush for the saw band -Closing unit with vice for fast approaching -Accurate stops with adjustment for miter cuts at 0°, 45°, 60° on the left side -bi-metal saw band 2950 x 27 x 0,9 mm -Wrench, instructions for use and instructions for ordering spare parts in the user's language -SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. -CCS (Cut Control System) with (A switch for manual and automatic cutting - B) regulation of cutting speed - C) hydraulic brake with tank - D) end stop for stopping the belt) also available as an option for machines already in production. -Vice with quick adjustment -Hydraulic transducer for belt tension indication -Electric coolant pump for cooling and lubrication of the saw band and manageable coolant tank above the base frame -For the versions with pneumatic vice (MA), the opening and closing of the vice is done with a manual valve (available as an option with pedal control) MEP SHARK 281 SXI evo [Semi-automatic] Part number SH281SXI motor power 1,5/1,8 kW belt opening 285 mm belt dimensions 2950x27x0,9 mm weight 435 kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230 / 280x200 cutting area 45° right 190 / 180x180 / 180x180 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Semi-automatic function: Vise closes and motor starts, saw head lowers for cut, motor shuts off, saw head raises, vise opens. Bedpfx Aocgbp Ijbcolc Some features: - New centralized control panel on articulated arm. - Latest generation hydraulic control unit, highly efficient and with low energy consumption. - Base with extractable coolant tank. The machine complies with CE regulations in all areas! For further technical data, please refer to the attached PDF document.

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Bjdpfocgbq Isx Abcslc Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. Bsdpfsfg E H Iex Abcolc CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Blodpfx Asfg E H Tsbcsc Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Bedpefg E H Sefx Abcjlc Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: used, This MEP bandsaw (metal bandsaw), model: Shark 280SX, is being offered in our industrial auction / machinery auction for the closure of Hofer Getriebetechnik – workshop equipment, lifts, tools, machines, forklifts, office furniture, metal cabinets, all auctioned online. Blodpfeyc Ur Eex Abcoc

Condition: used, Year of construction: 2013, functionality: limited functionality, saw band length: 2,950 mm, saw band width: 27 mm, total height: 1,680 mm, total width: 1,950 mm, feed length Y-axis: 500 mm, cutting width (max.): 245 mm, overall weight: 1,000 kg, cutting height (max.): 230 mm, table width: 245 mm, table length: 2,800 mm, working height: 890 mm, section length (max.): 9,999 mm, space requirement width: 1,950 mm, space requirement length: 2,900 mm, space requirement height: 2,100 mm, empty load weight: 1,000 kg, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. If you have any further questions, please feel free to contact us by phone or email. Best regards, Blsdpfx Absx Dirzocec Weber Geländersysteme

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Bjdpfxjlf Tu Us Abcslc Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: new, Model Name Shark 281 SXI evo Bledpfx Abjgvkgljcec