Used Milling Machine Horizontal for sale (92,546)

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES Bljdpfxow Rv Ahe Abzep – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: used, Year of construction: 1999, automatic feed in all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture 1999 Specifications Working area: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - Number/distance/size of T-slots: 5 / 50 mm / 14H8 Fixed clamping surface of the angle table: - Length x width: 800 x 400 mm - Number/distance/width of T-slots: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Feed levels: 18 - Feed range of X and Y axes: 16 - 800 mm/min - Feed range of Z axes: 8 - 400 mm/min - Rapid traverse of X and Y axes: 2000 mm/min - Rapid traverse of Z axes: 1000 mm/min - Maximum feed force of X and Y axes: 8 + 4 kN - Maximum feed force of Z axes: 10 + 5 kN Drive and speed of horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Speed levels: 18 - Speed range: 63 - 3150 rpm - Maximum permissible torque on the spindle clamp: 500 Nm - Tapered bore in the spindle: SK40 Hydraulic unit: - Operating pressure of tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump flow rate: 2.3 l/min Cooling device: - Pump motor power: 0.09 kW Bsdpfx Aevtzkxebzolp - Pump operating pressure: 0.04 MPa - Maximum amount of liquid pumped by the pump: 25 l/min - Maximum amount of liquid at the outlet: 7 l/min - Tank capacity: 40 l Required power supply: - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user-side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions WxHxD: 1975 x 1910 x 1810 mm - Machine weight including angle table and vertical milling head: 2200 kg

Condition: used, Year of construction: 2007, Serial no. 107.51.00.013, control unit by Heidenhain, type ITNC530, 5 axes, rotary/swivel table, travel X/Y/Z 1,000 x 700 x 700 mm, electrospindle by Step Tec, max. speed 24,000 rpm, 5-position pallet station, pallet size 500 x 600 mm, 165-tool changer, HSK 63 tool holder, swarf conveyor, belt filter, internal coolant supply, coolant temperature control, enclosure, BLUM laser measuring system, tool and accessory package, mobile workbench with 6 drawers, single-door, tool trolley, orange, 2 table carts, contents: tool holders, clamping devices, FCS zero-point clamping system, 5 grid plates, HD vise. Blodpfx Absxug Aljzep

Condition: good (used), Table length: 2500mm; Module: 20 Bedpfxext Nlgj Abzslp

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 7200 kg Control Unit Brand HAAS Main Drive Spindle speed range 4500 RPM Spindle motor power 22.4 kW Number of axis 3 Bsdpsxbiizefx Abzslp Movement X-Axis Movement 406 mm Y-Axis Movement 381 mm Z-Axis Movement 406 mm Tools Number of index 12 Max tool diameter 203 mm Max tool length 400 mm This 3-axis HAAS ST-30Y was manufactured in 2019, offering advanced capabilities for efficient horizontal turning. Ideal for complex machining tasks, this machine ensures precision and reliability. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: refurbished (used), Year of construction: 1974, Forest CNF 160 CNC Boring and Milling machine (1974, retrofitted in 2004) Blodpfxoxnc Rlj Abzop Machine – CNC Axes: X (Column Saddle travel) 12,500 mm, Y (Headstock Saddle Vertical travel) 3,500 mm, Z (Boring Shaft travel) 1,250 mm, W (Quill travel) 1,000 mm, W+Z (Cumulative travel) 2,250 mm. Rotary Table – CNC Axes: W2 (Table travel) 3,200 mm, B (Table rotation) 0–360°. Rotary Table Surface: 2,500 x 3,500 mm. Rapid Feed Axes: X max. 5,000 mm/min, Y max. 5,000 mm/min, Z max. 3,000 mm/min, W max. 3,000 mm/min, W2 max. 2,000 mm/min, B max. 1 rot/min. Work Feed Axes: X 1–2,000 mm/min, Y 1–2,000 mm/min, Z 1–1,000 mm/min, W 1–1,000 mm/min, W2 1–200 mm/min, B 0.1–1 rot/min. Milling Spindle Range (S – Gearbox with 4 mechanical ranges): Range #1 2.5–80 rpm, Range #2 80–160 rpm, Range #3 160–320 rpm, Range #2: 320 - 630 rpm. Boring shaft taper bore: ISO 50, Boring shaft diameter: 160 mm. FANUC 18M Contouring Numeric Control. FANUC made feed axes motors. FANUC made spindle motor. FANUC made drive system for axes and spindle motors. Overall size: W x H x L = 14,000 x 10,000 x 20,000mm. Machine weight: approx - 85,000 kg. Oil Chiller: Schimpke Model DK38-V from 1999. Coolant System: Yes. Chip Conveyor: No

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Bledpfx Aswu D A Eebzop Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Halbkabine Kühlmittelbehälter Handbuch Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Bodsigm Tcopfx Abzelp Gesamtleistungsbedarf 8 kW Maschinengewicht ca. 2,2 t Raumbedarf ca. 2 x 1,9 x 1,95

Condition: used, Year of construction: 2007, Serial no. 11480001523, Heidenhain control, type iTNC 530, 5 axes, travel X/Y/Z 1,000 x 1,000 x 1,000 mm, max. spindle speed 24,000 rpm, 2-station pallet changer, 120-position tool changer, HSK 63 tool holder, compact coolant unit, through-spindle coolant (IKZ), belt filter, chip conveyor, BLUM laser measurement system, tool and accessory package including: 2 table trolleys, drawer container with 7 pull-outs, mobile, WTS trolley, contents: HSK 63 tool holders, FCS zero-point clamping system, 10 grid plates of various sizes, operating hours: 44,190; 96,709. Blodpfx Aoxugznsbzep

Condition: excellent (used), Catalogue number 7689 Bedpfx Asw Eluqobzslp TECHNICAL SPECIFICATIONS - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg ADVANTAGES – Made in Poland – Very good condition – Used drilling machine Net price: 6300 PLN Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Bjdpfx Aoxqh Uuebzjlp Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1978, Droop and Rein LFAS130KE Milling Machine Bjdpfexnc N Iex Abzelp Axes: X (Table travel) 3,000 mm, Y (Cross-Rail vertical travel) 1,000 mm, Z (Milling Head Saddle on Cross-Rail travel) 1,500 mm, U (Boring Bar vertical travel) 300 mm. Axes Feeds: X min 20 mm/min, max 2,000 mm/min; Y min 20 mm/min, max 2,000 mm/min; Z min 20 mm/min, max 2,000 mm/min; U manually. Note: The X, Y, Z axes are equipped with linear encoders. On the control panel there is a display unit (DRO) for the X, Y, Z axes. For the U axis, direct viewing on a graduated ruler is used. Moving Table Load: max. 20,000 kg/m (uniform distribution on table surface). Moving Table usable surface: 4,000 × 1,600 mm. Moving Table total surface: 4,900 × 1,600 mm. Distance between Table and Cross-Rail: max. 1,200 mm. Machine Weight: approximately 50,000 kg. Overall Dimension of the Machine: L × W × H = 10,000 × 5,000 × 5,300 mm. Machine was made by DROOP & REIN, Germany, in 1978. Accessories include a 4-position at 90-degree Milling Head. Retrofitted in 2000 Coolant System: Yes. Not functional.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Bledpoxugcxofx Abzep Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Bledpedgk H Ajfx Abzop Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: good (used), Year of construction: 2017, m. control PC Bsdpext Nl Tefx Abzolp +++ Attention: Machine is part of an online auction! +++

Condition: excellent (used), CATALOG NUMBER 6663 TECHNICAL DATA - Drilling spindle: 1 pc - Spindle locking - Oscillation range: 100mm - Max tool diameter: 16mm - Max hole depth: 100mm - Manual table adjustment up/down, front/back - Working table dimensions: 500x300mm - Pneumatic cylinder - Extraction nozzle diameter: 80mm - Centralized bearing lubrication Blsdpfxsiamdle Abzjp - Oscillation motor approx. 0.75kW - Main motor 2.4kW - Dimensions (L/W/H): 1100x900x1450mm - Weight: 534kg FEATURES – Swedish-made – With oscillation – Used drilling machine, excellent condition Net price: 7,900 PLN Net price: 1,880 EUR (at exchange rate of 4.2 PLN/EUR) (Prices may vary with significant rate fluctuations)

Year of construction: 2006, operating hours: 65,945 h, condition: ready for operation (used), General Data Machine weight 2500 kg Control Unit Brand FANUC Bljdjxr Rycspfx Abzsp Main Drive Spindle speed range 4500 rpm Spindle motor power 7.5 kW This Takamaz X-100 was manufactured in 2006. A robust horizontal turning machine featuring a max turning diameter of 203 mm, spindle speed up to 4500 rpm, and a chuck diameter of 153 mm. Weighing 2500 kg, it underwent a spindle and ball screws overhaul in 2021. If you are looking to get high quality turning capabilities consider the Takamaz X-100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Bedpfx Absxuf T Aezslp Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: good (used), Year of construction: 1984, 12 spindle speeds, spindle mount SK40, speed range 50–2240 rpm, hydraulic machine vice, jaw width 125 mm, tool trolley, manuf. Theisen Werkzeuge, steel, green, mobile, 3 drawers, various accessories +++ Attention: Machine is part of an online auction! +++ Bledpfxoxt Nlaj Abzjp

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 10800 mm Measurements height 3100 mm Machine weight 16000kg This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine. Blsdpfxjxp Smfe Abzep Application Types Milling

Condition: good (used), Serial no. 213101174, 2 photoelectric sensor counting units +++ Attention: This machine is part of an online auction! +++ Blodpoxt Iycjfx Abzep

Year of construction: 2019, operating hours: 3,728 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Bsdsxq Htispfx Abzslp Main Drive Spindle speed range 4000 rpm Spindle bore 88.9 mm Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement 51 mm Z-Axis Movement 572 mm This 3-axis HAAS ST-20Y was manufactured in 2019, featuring a chuck size of 210 mm and a maximum turning diameter of 298 mm. It includes a hydraulically controlled tailstock, automatic tool probe, and a chip conveyor. With a spindle speed up to 4000 rpm and driven tools with a C-axis, consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 2580 mm Blsdpfx Ajxrwgiobzep Measurements depth 2210 mm Measurements height 1910 mm Machine weight 1910 kg Control Unit Brand HEIDENHAIN Model TNC 310 Main Drive Spindle motor power 5.5 kW Movement X-Axis Movement 500 Y-Axis Movement 400 Z-Axis Movement 400 This 3-axis INTOS FNG-40 CNC E was manufactured in 2007. It features a table size of 800 x 400 mm, X/Y/Z travel of 500/400/400 mm, and a spindle taper ISO 40. Equipped with a Heidenhain TNC 310 control system, it includes a workpiece probe, rotary table, and shaping head. If you are looking to get high-quality milling capabilities consider the INTOS FNG-40 CNC E machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Bljdpfx Aboxuaxmozep Chip conveyor Yes Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA 15 bar pump with filter This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2000, operating hours: 25,616 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC430 B Main Drive Number of axis 3 Movement X-Axis Movement 3000 mm Y-Axis Movement 1400 mm Blodpfxexuayds Abzsp Z-Axis Movement 1500 mm This 3-axis SACHMAN T22 HS was manufactured in 2000 and features a Heidenhain TNC 430 B digital control, a 20-fold tool changer SK 50, and a table size of 3,000 x 1,400 mm. It includes an adaptable high-speed spindle capable of 30,000 rpm and a travel range of X=3,000, Y=1,400, Z=1,500 mm. Consider the opportunity to buy this SACHMAN T22 HS Bed Type Milling Machine. Contact us for more information about this machine. Application Types Milling