Used New Bandsaw for sale (20,184)

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Tsdpjy Tyg Djfx Abtsb Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Tjdpfxjy Tyg Rs Abteb Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 3,908cc Torque: 257 Nm @ 1400 rpm Dimension: 3,660 X 2,010 X2,400 Gearbox type: 8F + 2R partially synchromesh No. of cylinders / aspiration: 4 / naturally Capacity (cm³): 3,908 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75 Max. torque (gross) (Nm@rpm): 257 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 1.03 Optional without creeper (F+R) 12+3 Speed range (kph) 2.14 - 31.85 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Todpfey Tyc Sjx Abteb Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1500 Maximum lift capacity at ball ends with assist arms (kg) 2000 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200 = More information = Number of cylinders: 4 GVW: 2.700 kg Wheelbase: 216 cm

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 101 kW (137.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 796 kg, input voltage: 400 V, total width: 1,180 mm, total length: 2,760 mm, total height: 1,810 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEE 402 101 KW Cooling capacity: 101 kW / 28.72 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Сopeland ZP293KZE-TED-456 (scroll) + 1 pcs. Сopeland ZP182KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.76x1.18x1.81 m. Tedpfxozxqmcs Abtsb Weight: 796 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 93.4 kW (126.99 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 090R 0153 93.4 KW Cooling capacity: 93.4 kW / 26.56 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125 (Frequency inverter), expansion vessel. Dimensions: 2.28x2.13x1.33 m Todpfx Ajzxpazsbtob Weight: 743 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 66.7 kW (90.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,060 kg, input voltage: 400 V, total width: 1,100 mm, total length: 2,600 mm, total height: 2,400 mm, warranty duration: 12 months, heating capacity: 49.4 kW (67.17 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IS G07 0082 66.7 kW/49.4 kW Cooling capacity: 66.7 kW / 18.97 tons (12/7 — 35°C) Heating capacity: 49.4 kW / 14.05 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Kiplink. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Todpfx Ajzxn Spebtsb Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi BVK110FBAMT (scroll, inverter) + 1 pcs. Mitsubishi BV110YBAMT (scroll) Type of refrigerant: R32 Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos MGE80A 1-56C-IA-110 (Frequency inverter) Dimensions: 2.6x1.1x2.4 m Weight: 1060 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 381 kW (518.02 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,100 kg, input voltage: 400 V, total width: 2,200 mm, total length: 5,600 mm, total height: 2,500 mm, warranty duration: 12 months, Aircooled chiller Trane RTAF 105 XE SN 381 kW Cooling capacity: 381 kW / 108.34 tons (12/7 — 35°C) Year of manufacture: 2021 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Trane CHHP0L2TKL0N069A (screw) Type of refrigerant: R134a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.6x2.2x2.5 m. Weight: 4100 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Tsdjzxntgspfx Abtob The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 221.1 kW (300.61 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,000 mm, total height: 1,700 mm, warranty duration: 12 months, Watercooled chiller Climaveneta FX W 0951 221.1 kW Cooling capacity: 221.1 kW / 62.87 tons (12/7 — 35°C) Year of manufacture: 2018 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSH7593-110Y-40P (screw) Type of refrigerant: R134A Dimensions: 3x1.2x1.7 m. Weight: 2000 kg. Working hours: 33 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Tjdpfx Abszxnp Ietob The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 63.6 kW (86.47 HP), type of input current: three-phase, type of cooling: air, overall weight: 649 kg, input voltage: 400 V, total width: 1,120 mm, total length: 2,130 mm, total height: 1,920 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 060R 0337 63.6 KW Cooling capacity: 63.6 kW / 18.08 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF130A4ACA (scroll) Type of refrigerant: R32 Number of fans: 1 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Grundfos AC25-125 (Frequency inverter), buffer tank 208 l. Dimensions: 2.13x1.12x1.92 m Weight: 649 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Todjzxnchjpfx Abteb WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 83 kW (112.85 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,230 kg, input voltage: 400 V, total width: 830 mm, total length: 1,840 mm, total height: 2,030 mm, warranty duration: 12 months, Aircooled chiller KKT cBoxX 90 83 KW Cooling capacity: 83 kW / 23.6 tons (tw2=20°C / tu=32°C ) Year of manufacture: 2021 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSH161A4ALD (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos ML90HA-J-H3-CML2A + 1 pcs. Grundfos ML132DA-J-H3-CML4A, buffer tank (open-type). Dimensions: 1.84x0.83x2.03 m. Weight: 1230 kg. Working hours: 1/1 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Todpjzxc I Sofx Abtob WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Tedpfxoyuuc Ij Abtob Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 785 kW (1,067.30 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,190 kg, input voltage: 400 V, total width: 2,330 mm, total length: 8,500 mm, total height: 2,640 mm, warranty duration: 12 months, AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Tedpozw Udvofx Abtsb Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 656.5 kW (892.59 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,148 kg, input voltage: 400 V, total width: 2,260 mm, total length: 6,260 mm, total height: 2,570 mm, warranty duration: 12 months, Aircooled chiller CLIMAVENETA NX2 G06/K 0706 656.5 kW Cooling capacity: 656.5 kW / 186.67 tons (12/7 — 35°C) Tjdozw H Rnjpfx Abtob Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 5 pcs. Danfoss DSH485C4APC (scroll) + 1 pcs. Danfoss DSH600B4APC (scroll) Type of refrigerant: R454B Number of fans: 12 pcs. (EC-fans) Dimensions: 6.26x2.26x2.57 m. Weight: 5148 kg. Working hours: 0/0/0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 537 kW (730.12 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,481 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,530 mm, total height: 2,300 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30KAV 0550 0038 537 KW Cooling capacity: 537.0 kW / 152.69 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube + 2 pcs. Plate (Economizer) + 2 pcs. Plate (Recuperation) Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06ZCE1H3AA06013 (screw, inverter) Type of refrigerant: R134a Number of fans: 6 pcs. (Frequency inverter) Dimensions: 5.53x2.25x2.3 m Weight: 5481 kg Working hours: 971/793 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Tjdpezw H Hcjfx Abteb Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, Item: A-11297-Silostank 95m3 Exterior dimensions: Dia Ø 3300 mm Total H 11647 mm Stainless steel tank - 3 pcs. AISI 304 Tedeua U Hzspfx Abteb Outlet height 400 mm Top of the tank: Air in/outlet 500 mm with gauge Inside : polished weld Thickness of plates: Bottom: 4 mm, Cylinder : 4 and 3 mm, Top : 3 mm Possible to choose color of outside plates if you need insulation.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 520.6 kW (707.82 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,756 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,850 mm, total height: 2,400 mm, warranty duration: 12 months, Aircooled chiller YORK YLAA0517HE 520.6 KW Cooling capacity: 520.6 kW / 148.03 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 6 pcs. Bitzer GSD80385VAB462 (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. Dimensions: 4.85x2.25x2.4 m. Weight: 3756 kg. Working hours: 3/2/3/2/2/3 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Tjdpfx Aozw Eufjbtjb Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 308 kW (418.76 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,036 kg, input voltage: 400 V, total width: 2,300 mm, total length: 4,700 mm, total height: 2,100 mm, warranty duration: 12 months, Aircooled chiller LENNOX NAC 300D NM7M 308 KW Cooling capacity: 308 kW / 87.6 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. (3 pcs. COPELAND ZP385KCE-TWD-524 + 1pcs. COPELAND ZP295KCE-TWD-524) (scroll) Type of refrigerant: R410-А Number of fans: 6 pcs. ZIEHL-ABEGG FN080-SDS 6 V7 Tsdpjzw Ep Asfx Abtsb Hydraulic module: 2pcs. water pump WILO w1121175-2-p190, expansion vessel Dimensions: 4.7x2.3x2.1 m Weight: 3036 kg Working hours: 1/0/0/0 h. Condition: new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 254 kW (345.34 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,458 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 186 kW (252.89 HP), Aircooled chiller/Heat pump YORK YMPA0260PE50 254 kW/186 kW Tedpfxezw Enfs Abtjb Cooling capacity: 254 kW / 72.22 tons (12/7 — 35°C) Heating capacity: 186 kW / 52.89 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 4 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 6 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI E855DH-80D2YG (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo HED IE5 (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2458 kg. Working hours: 0/0/0/0/0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,744 kg, input voltage: 400 V, total width: 2,300 mm, total length: 6,700 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 531 kW (721.96 HP), Aircooled chiller/Heat pump PANASONIC ECO I W AQUA EVO 530 H 491 kW/531 kW Cooling capacity: 491 kW / 139.61 tons (12/7 — 35°C) Heating capacity: 531 kW / 150.99 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump Refrigerant circuit: 2 pcs. Tedpfx Abjzw Egzjtsb Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Bitzer GSD80385VLB4-2 (scroll) Type of refrigerant: R410a Number of fans: 12 pcs. (EC-fans) Dimensions: 6.7x2.3x2.5 m. Weight: 4744 kg. Working hours: 24/24/24/24/24/24 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 420 kW (571.04 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,955 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,600 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 451 kW (613.19 HP), Aircooled chiller/Heat pump Panasonic ECO I W AQUA 450 H 420 kW/451 kW Cooling capacity: 420 kW / 119.42 tons (12/7 — 35°C) Heating capacity: 451 kW / 128.24 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Bitzer GSD80485VLB4-2 (scroll) Type of refrigerant: R410a Tedpezw Ef Defx Abtjb Number of fans: 10 pcs. (EC-fans) Dimensions: 5.6x2.3x2.5 m. Weight: 3955 kg. Working hours: 6/6/6/6 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 443 kW (602.31 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,759 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,700 mm, total height: 2,500 mm, warranty duration: 12 months, Aircooled chiller Systemair SYSCREW 440 AIR EVO HSE CO 443 kW Cooling capacity: 443 kW / 125.97 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH7593-90Y-40P (screw) + 1 pcs. Bitzer CSVH24-125Y-40A (screw, inverter) Type of refrigerant: R513a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.7x2.25x2.5 m. Weight: 4759 kg. Working hours: 3/3 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Todpfxezw Eb Se Abtjb

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 349.6 kW (475.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, input voltage: 400 V, total width: 2,200 mm, total length: 5,160 mm, total height: 2,450 mm, warranty duration: 12 months, heating capacity: 363.1 kW (493.68 HP), AIRCOOLED CHILLER/HEAT PUMP AERMEC NPG1200A4 349.6 KW/363.1 KW Cooling capacity: 349.6 kW / 99.4 tons (12/7 — 35°C) Heating capacity: 363.1 kW / 103.24 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. 4-pipe system Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland YP485K1T-TED-GCR (scroll) + 2 pcs. Copeland YP233K1T-TED-GCR (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.16x2.2x2.45 m Weight: 3800 kg Working hours: 105/105/630/630 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Todpfezw D Iqex Abtob WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 330.4 kW (449.22 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,955 kg, input voltage: 400 V, total width: 2,350 mm, total length: 5,200 mm, total height: 2,450 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEM 120.4 330.4 KW Cooling capacity: 330.4 kW / 93.95 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410А Number of fans: 6 pcs. (Frequency inverter) Dimensions: 5.2x2.35x2.45 m. Weight: 2955 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Tjdpozw Ayfefx Abteb Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 306 kW (416.04 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,500 kg, input voltage: 400 V, total width: 950 mm, total length: 3,400 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 340 kW (462.27 HP), Watercooled chiller/Heat pump Climaveneta NX WN 1004 306 kW/340 kW Cooling capacity: 306 kW / 87.01 tons (12/7 — 35°C) Todpfx Abezw Axbjtsb Heating capacity: 340 kW / 96.68 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Kiplink Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Hydraulic module: 2 pcs. water pump Grundfos TPED 80-210/2 Dimensions: 3.4x0.95x2 m Weight: 1500 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 217 kW (295.04 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,590 kg, input voltage: 400 V, total width: 2,200 mm, total length: 2,780 mm, total height: 2,450 mm, warranty duration: 12 months, Aircooled chiller AERMEC NRB0800 L 217 KW Cooling capacity: 217 kW / 61.7 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. COPELAND ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 4 pcs. (EC-fan) Hydraulic module: 2 pcs. water pump LOWARA PLM112RB14S2/340 E3, 2 pcs. expansion vessel, buffer tank. Dimensions: 2.78x2.2x2.45 m. Weight: 3590 kg. Working hours: 0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Tjdpfx Abjzw Awwstjb Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.