Used Pallet Shrink Wrap Machine for sale (69,238)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay 6 recordable programs Njdpjxwa Sfefx Aiyoda N-Connect: remote wifi connection for machine total control

Year of construction: 2015, condition: used, We offer this used, fully automatic cucumber packaging system, manufactured in 2015. It is a Serfruit system, equipped with an Ulma SVC550 packaging machine and 2 Kuka robots. Year of manufacture: 2015 Description: Pallets are placed on a roller conveyor near the floor. The roller conveyor moves the pallet from the pallet magazine into the robot cell. The robot picks up a layer of boxes and places them on a table, where they are separated. From this conveyor, the boxes are transferred one by one to a box emptying station, where the cucumbers are emptied. On a conveyor belt, the cucumbers are separated before being transported to the Ulma sealer. Nodpfxozu H Tdo Aiyjda After the sealing unit, a corrugated conveyor transports the cucumbers to another robot cell. The labeling machine (Bizerba GLM-I) labels the cucumbers fully automatically. The robot has a gripper with 12 suction cups. It is capable of picking up 12, 11, 10, 9, or 8 cucumbers at a time. Depending on the selected program, 12 to 24 cucumbers can be placed in a box. The program can be adjusted as needed. As a standard setting, 12 cucumbers per box are used, and the installation is set for 180 cucumbers/minute with 12 cucumbers/box. A different number of cucumbers per box may reduce the system's speed. The cartons used to hold the packaged cucumbers are usually the same as those used for the unpackaged cucumbers. It is also possible to manually remove these cartons and place new ones into the system. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Nedpjxfl Izjfx Aiyeda Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: like new (used), Year of construction: 2023, CYCLOP CTT 300-16300-1030 Pallet wrapper Technical data: Turntable diameter Ø 1650 mm Turntable speed up to 15 rpm, adjustable Start/stop, frequency-controlled Number of top/bottom wraps 1-15 Stretching unit speed, continuously adjustable Programs, 9 adjustable Pallet load Max. length x width 1200 x 1000 mm Max. height incl. pallet 2200 mm Maximum weight 2000 kg Stretch film Core diameter 76 mm Outer diameter max. 250 mm Film width max. 500 mm Film thickness 9 – 35 µm Ndedpfxezrfq Ae Aiyoa The pallet wrapper has never been used and is in new condition.

Condition: excellent (used), Year of construction: 2010, Year: 2010 Maximum sheet size: 500 x 720 mm Minimum sheet size: 200 x 250 mm Ndjdoqfga Sjpfx Aiysa Paper weight: 130 g/m² to 350 g/m² Speed: 20 m/min Pneumatic pressure Touch screen Display

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 131/04, total width: 2,400 mm, total height: 3,100 mm, total length: 3,200 mm, type of input current: three-phase, overall weight: 3,000 kg, working width: 1,500 mm, working height: 180 mm, power: 50 kW (67.98 HP), Storti wood working machine GSI/150-AL (2004). Semi-automated line which requires two operatives to feed the double length table. Machine allows for UK Standard (1200 x 1000mm), Euro pallet (1200 x 800mm) and 2way entry pallets production. Ndsdpoydm H Defx Aiyja No listed price - open to offers.

Condition: good (used), Belt length: 1250 x 650 mm Welding area: 1000 x 700 mm Nsdpfxsi D Dz Hs Aiysda

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Ndsdpfxoykub Ae Aiyoa Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Length 2995 mm Width 1250 mm Height 1550 mm Nsdpetrtztofx Aiyeda

Year of construction: 2012, condition: excellent (used), Mobile pallet wrapper Inventory no. 3844 Manufacturer: Robopac Type: Robot Worker FRD Year of manufacture: 2012 Ndodpfx Aozp R S Hjiyoa Technical data (approx.): * Wrapping height max. 2200 mm * Max. width unlimited * Min. width approx. 600 mm * Travel speed adjustable * Film width 500 mm * Core diameter max. 76 mm * Weight approx. 340 kg * Equipped with new batteries * In very good condition!

Condition: ready for operation (used), Year of manufacture: 1973 Shrink film oven 250°C Heating: fuel oil / gas / electric 3.5 kW 380V Combustion chamber: 2,000 x 1,800 x 2,100 mm (L x W x H) External dimensions: 2,900 x 2,100 x 2,600 mm (L x W x H) Fully functional Ndodpfx Aisxzy Rieyoa

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Ndjdpfx Aioyak Iksyoa Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Weight kg 600

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: N3.610, Available: immediately Nedpfxjwiffws Aiysda

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Nsdpfx Aozr Hhpoiyoda Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: used, BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete) Price fully refurbished: Ask for Quote Nedozbg Euopfx Aiyeda

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long Ndodsykucmepfx Aiyea TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: used, Year of construction: 2008, We are offering this used STORTI GSI / 170-TA9 pallet production machine, year of manufacture 2008. Complete line includes: Ndedpoyvggzsfx Aiyoa Block-making unit 2 nailing machines Turners Brand marking (burning) Corner cutting Stacker Fully operational, was in use until recently. If you have any questions or need further information, please contact us by message or phone.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,500 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 2,250 mm, operating pressure: 8 bar, input current: 8 A, warranty duration: 24 months, Machine Condition: New Installation & Service: Available across Europe Training: Operational training included Warranty: Manufacturer's warranty Maximum Pallet Dimensions: 2x 140cm x 140cm Operation: Dual-table system (left and right tables) Versatility: Nails any type of pallet + bases/skids Memory: Storage for up to 900 different pallet designs Usability: Simple and user-friendly operation Control Interface Languages: English, German, Polish, French, Italian, Spanish Ndedpfx Ajxlxrmjiyea Automation: Automatic path generation (nailing route) Customization: Custom machine lengths available up to 13 meters

Year of construction: 2023, condition: as good as new (ex-display), THE EXTRA LARGE SHRINK WRAPPER In addition to small packaging machines for packaging small and medium-sized products, Italdibipack also offers EXTRA-LARGE “One-Step®” systems, with the Dibipack BIG, one of the largest models of the Dibipack Evolution line, designed and constructed to cover the Meet requirements. It is a convincing answer to the increasing demand for a large machine with large capacity and high performance. Ideal to pack large size and large surface products such as frames, pictures and panels. TECHNICAL SPECIFICATIONS TECHNICAL DATA DIBIPACK 6084 EVX Voltage supply: 400 V - 3 Ph + N Maximum required power: 7 KW Overall dimensions of the machine L x W: 1940 x 950 mm Worktop height (on stand): 920 mm Machine weight: 190 kg Sealing area W x L: 580 x 840 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 800 mm Output: 4 - 6 pieces / min Notes: We reserve the right to make technical changes. The performance depends on the operator and the type of packaging Ndsdpomv Emujfx Aiyea MORE INFORMATION MORE INFORMATION These "giants" have the same specifications as the shrink wrapping machines of the Dibipack Evolution line, but with some peculiarities: for example, two holding magnets that keep the hood closed during the work cycle and two fans that ensure better circulation of heat air during shrinking. The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLDEN FILM). Machine manufactured according to CE guidelines.

Condition: new, Year of construction: 2026, • Two main electric motors, each with a power of 11 kW • Maximum material thickness: 250 mm • Maximum material width: 300 mm • Minimum cutting height: 10 mm • Adjustable feed rate: 5-25 m/min • Lower saw blade stroke: 10-150 • Upper saw blade stroke: 20-190 • Minimum distance between the saw blades: 15 mm • Saw blade lubrication: pneumatic sprayers • Hydraulic saw blade tensioning • Manual setting marker • Wheel diameter: 710 mm • Outfeed table length: 2.5 m Njdpfxezqzgwo Aiyoda • Double pressure rollers

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, Overwrapping/Cellophane Wrapping Machine by Sollas Holland B.V., Model SOLLAS 20, Year of Manufacture: 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual products or bundles. Technical Specifications Machine type: Overwrapping/Cellophane Wrapping Machine Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam/Servo Output: up to 50 cycles/min Operating pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Max. film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Nodpoyhc Dysfx Aiyjda Max.: 300 × 200 × 96 mm Film material: PP, coated paper, common heat-sealable materials Machine weight: approx. 950 kg Machine color: RAL 9010 (white) Features Servo-driven film feed Cam mechanism – robust and low-maintenance Single-sided infeed and outfeed (single level) PLC control with touchscreen Trailing-edge seal system Quick format changeover (approx. 10–20 min) Low-cost exchange parts Compatible parts with Sollas 17 / 19 / S(X) series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel covers Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoners, case packers, banding systems, etc.) Operational Advantages Highly reliable technology Compact design Flexible format ranges Quick changeover Ideal for small to medium production runs Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use More photos and videos available! Shipping terms: ex location, loaded free of charge Loading: possible by forklift Transport/disassembly: can be organized Contact If interested, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and errors All prices net plus VAT

Year of construction: 2013, condition: good (used), Pallet wrapper, Brüninghaus or Siat, FS401 – used: Price ex works: only €3,500 (net)! Device 3 Manufacturer: Brüninghaus or Siat (Brüninghaus is part of Siat) Type: WS 165 N, or 16-M or Siat model F1L Service number: 1030.11625 Year of manufacture: 2013 Pallet length L: 1200 mm Pallet width B: 800 mm Pallet height H: 2100 mm Maximum pallet weight: 2000 kg Program selector: manual/automatic 10 different programs Film tension control via mechanical brake Nodpfx Aiezbyl Isyoda Turntable speed adjustable via inverter Easy operation Fixed stop device Photo cell for sensing pallet height Turntable diameter: 1650 mm Machine can be easily repositioned using a forklift 400V, 600 watts, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 3000 is an automated portal nailing machine for the efficient production of pallets and boxes. With up to twelve nailing units, two work areas, and four clamping stations, it offers high throughput with reduced setup time. The nailing units, which are controlled in groups, are manually adjusted to the pallets to be produced and automatically moved via the central portal. A 7-inch touch display, extensive safety features, and options such as central height adjustment, robotic stacking, or remote maintenance make the StoNail 3000 a reliable solution for companies that want to efficiently produce pallets with regular nailing patterns. Applications: Standard stringer and block pallets Special pallets & customized solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Box walls & wooden packaging Nailing table with nail bridge: Robust frame construction with a 70° inclination angle for ergonomic operation Machine length: approx. 8500 mm Work area (L x H): 1 pallet: max. 6000 x 1700 mm or Nedpforalk Rex Aiyoda 2 pallets: max. 2500 x 1700 mm Option: Extension or shortening of the machine frame by 2000 mm or according to customer requirements Modular pallet stop system for inserting the loose wood and blocks: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, crossbars, and top boards Rivet plates can be used at all positions Stringer prefabrication Option: Equipment with laminated wood panels for custom templates Frequency-controlled nail bridge for positioning the nailing units Equipped with 8 nailing units incl. feed cylinder, nailing unit holder, release, and nailing shoes for limiting the insertion depth Manual quick adjustment of the nailing units depending on the pallet format Collision monitoring: The movement of the feed cylinder is constantly monitored Start button located directly on the nail bridge Nailing units: Uniform nailing unit holder for large and small nail guns Maximum nail length: 90 mm (longer nails available upon request) Option: Equipment of the nail guns with Maxi-Coil magazines for up to 1000 nails Programming: Simple, intuitive programming. The machine takes over part of the programming and performs a learning cycle before the first program start to automatically detect the nail positions. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German, English, Czech, and Taiwanese Safety equipment: Emergency stop button on the machine and on the control panel Start emergency stop on the nail bridge Spring-return emergency stop on the nail bridge Option: Safety foot mats for person detection Key features and options can be found on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 7000 is a fully automated portal nailing machine for the flexible production of pallets and crates, even with large workpiece dimensions. With up to three individually adjustable nailing head pairs, two work areas, and a generous Y-axis travel of 1,250 mm, it is designed for maximum efficiency and high flexibility. A 12-inch touch display, automatic height adjustment, and numerous expansion options support user-friendly operation. Offline programming allows new programs to be created and simulated outside the machine, reducing setup times and preventing downtime. The integrated automatic path optimization further increases the cycle output and ensures resource-efficient operation. Applications: Standard stringer and block pallets Special pallets & custom solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Crate walls & wooden packaging Nailing bridge with rotary table: Robust frame construction with a tilt angle of 65° for ergonomic operation Machine length: approx. 7000 mm Rotary table with 2 work areas: Work area per side (L x H): 3000 x 1700 mm Cladding of the rotary table with plywood panels for custom templates Option: Clamping brackets for use with custom templates Option: Modular pallet clamping system for inserting loose boards and blocks Frequency-controlled nailing bridge: Up to three independently controlled nailing head pairs for complex nailing patterns Accommodation of up to 6 nailing heads Coverage of the entire work area with the nailing heads Collision monitoring: The movement of the feed cylinder is constantly monitored Nailing heads: Industrial nailing heads or hand-held devices Nail length max.: 130 mm Equipment of the nailing heads with Maxi-Coil magazines for up to 1000 nails Nailing shoes for limiting the insertion depth Option: Stapling devices, drilling heads Robot: Type: Kuka KR210 R3100-2 (Alternatively: similar manufacturer or refurbished robot possible) Gripper with clamping jaws for pallet removal and stacking Product weight max.: 80 kg Stacking height max.: 2800 mm Normal and interleaved stacking Option: Retrofitting the robot at a later date Buffer conveyor (Optional): For buffering several pallet stacks Fully enclosed by a robust plastic modular belt Programming: Simple, intuitive programming on the 12-inch touch panel directly on the machine. With the entered parameters, the pallets or crate parts are completely recorded or visualized. Programming of the removal and stacking process via robot is also done directly on the touch panel – no robot knowledge required by the customer. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Nsdperallrefx Aiysda Operating language available in German and English Option: Board width measurement for decreasing board widths Safety equipment: Safety fence around the entire system including access monitoring Emergency stop button on the outside of the machine and on the control panel Safety laser scanner to protect the rotary table Safety light curtain for pallet removal

Year of construction: 1995, condition: good (used), strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine Nedpfx Aju Huubsiysda -Manufacturer: Waldys, drive unit for stretch wrapping machine model 55 -Motor: 4 kW / 80 - 16 rpm -Individual components: see photos -Dimensions: 640/570/H680 mm -Weight: 120 kg