Used Palletizer for sale (6,630)

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net Bdsdpfx Ajdv Eu Hjndsi - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, functionality: fully functional, roll diameter: 60 mm, roll width: 60 mm, roll pitch: 155 mm, total width: 955 mm, total height: 90 mm, total length: 2,500 mm, conveying length: 2,500 mm, construction width: 955 mm, construction height: 90 mm, TAF article number: 1000004052 Overall dimensions: approx. 2,500 x 955 x 90 mm (LxWxH) Width incl. side panel: 690 mm Side panel height: 80 mm Width incl. drive: 955 mm Conveyor length: approx. 2,500 mm Conveyor width: 855 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 155 mm Roller diameter: 60 mm Drive type: Gravity Conveyor speed: constant Condition: Used / fully functional Bdedst H Ez Depfx Andsi Function test: OK

Condition: good (used), functionality: fully functional, construction height: 90 mm, construction width: 905 mm, conveying length: 1,270 mm, roll diameter: 60 mm, roll spacing: 170 mm, roll width: 855 mm, TAF article number: 1000003933 Manufacturer: BITO Overall dimensions: approx. 1,270 x 905 x 90 mm (LxWxH) Shelf width: 880 mm Cheek height: 80 mm Conveyor length: 1,270 mm Conveyor width: 855 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 170 mm Roller diameter: 60 mm Drive: Gravity Special features: 1 brake roller Condition: Used / fully functional Function test: OK Bodpfxouda Ife Andedi

Condition: used, functionality: unexamined, Batch of pallet racking with beams and boards. Assembled length approx. 35 linear meters. Construction height 400 cm. Bsdpfx Aew Hyzuondsdi Uprights: 14 pcs | width 100 cm, height 400 cm Beams: 71 pcs | width 270 cm Wooden boards for use in beams: 31 pcs Includes fixing clips. Only sold as a complete lot.

Condition: used, Year of construction: 2007, Used Palletizer ACMI RASAR P180 2200 plastic crates – hour General Features of the Automatic Palletizer Bodpfx Ajwimlxendsdi The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour is a conventional automatic low-level palletizer designed to optimize end-of-line operations in high-speed bottling processes. Specifically, the Italian manufacturer ACMI built this model in 2007. As a result, it delivers a nominal capacity of 2200 plastic crates/hour, which ensures high productivity. In particular, it suits bottling lines that handle 1-liter formats in both glass and PET. Moreover, the system prioritizes reliability and speed in demanding industrial settings. Compatibility with Bottle Crates and Pallets The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour efficiently handles crates containing 12 glass bottles. Consequently, it proves ideal for beverage production environments where crate-based transport is standard. Furthermore, the machine processes standard CP1 pallets (1000×1200 mm), ensuring compatibility with common logistics solutions. In addition, it includes an integrated pallet magazine, which significantly reduces the need for manual intervention. This, in turn, contributes to continuous and automated operation. As such, it streamlines the entire end-of-line workflow. Movement System and Automation This model features a low-level movement system. Not only does this simplify the mechanical layout, but it also facilitates maintenance access. Therefore, operators can perform inspections and servicing more efficiently. A Siemens PLC manages the palletizing cycle, thereby guaranteeing precise control and high reliability. Additionally, the PLC allows seamless integration with upstream and downstream equipment. In short, the automation setup supports complex configurations while maintaining ease of use. Safety Functions and Technical Documentation The Used Palletizer ACMI RASAR P180 2200 plastic crates-  hour includes all required safety features to comply with current industrial regulations. Specifically, it comes with physical guards, presence sensors, and interlocks. Thanks to these features, the system protects operators during operation and maintenance. Besides, it includes complete technical manuals. These documents, in turn, support technicians during installation, configuration, and servicing. Consequently, the equipment offers not only performance but also compliance and maintainability. Current Condition and Recommissioning Potential Currently, technicians have dismantled the Used Palletizer ACMI RASAR P180 2200 plastic crates – hour. Therefore, transport and storage become significantly easier. Additionally, the modular construction reduces both time and effort during recommissioning. As a result, companies can quickly reintegrate the machine into existing production lines. Technical Conclusion of the Used Palletizer ACMI The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour offers a highly specialized and reliable solution for manufacturers who need high-capacity palletizing systems.

Condition: excellent (used), functionality: fully functional, Hello, Bodewa Ihispfx Andjdi We offer used and new pallets for workpiece clamping from Erowa or compatible manufacturers. These are prepared to accommodate clamps with a 52mm pitch. We can also easily adapt clamps with a 96mm pitch. Clamping spigots included. Individual acceptance is possible. Spare parts are available. The clamps are not for sale. The used clamping devices have been cleaned and tested by us. A functional test was also performed. The clamping devices show slight signs of wear. Do you have any questions? We would be happy to help.

Condition: used, machine/vehicle number: 16980, Year of construction: 2020, operating hours: 9,736 h, load capacity: 1,400 kg, lifting height: 5,316 mm, free lift: 1,745 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,781 kg, enginetype: Electric, manufacturer: Still Serial Number: W42374X00024 Bedsyx Rbvjpfx Andjdi Battery Details: 24 Volt

Condition: used, machine/vehicle number: 16841, Year of construction: 2016, operating hours: 5,842 h, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, mast type: simplex, battery voltage: 24 V, fork length: 1,190 mm, rear tire size: Tandem, overall weight: 864 kg, enginetype: Electric, manufacturer: Still Bsdpfoygzd Nox Andsdi Serial Number: F20179G00769 Battery Details: 24 Volt

Condition: used, machine/vehicle number: 17047, Year of construction: 2019, operating hours: 4,817 h, load capacity: 2,000 kg, lifting height: 2,024 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,540 mm, battery voltage: 24 V, enginetype: Electric, manufacturer: Still Serial Number: W40313V00203 Battery Details: 24 Volt Bdodpfx Aoy Hnimondoi

Condition: good (used), Good day, we offer here used pallets for workpiece clamping from Erowa. These belong to the pallets P 148 Inox and are suitable for machining. The following parts are available: Pallet P 148 Inox ER-098667 6x Pallet P 148 Inox ER-041912. 3x They were cleaned and checked in our company. In addition, a functional test was performed. The clamping devices have slight signs of use, and are technically in very good condition. Clamping spigot included . Bdjdpfxjp Hf Ite Andsi Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN350456, Year of construction: 2006, operating hours: 10,065 h, lifting height: 82,50,000 mm, fuel type: electric, maximum load weight: 1,500 kg, Machine in very good condition. Information about the model and parameters can be found in the photo of the nameplate. Bdodpjr E Dlpefx Andji I invite you to contact me

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. Bjdpfx Aezhbf Ijndjdi This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: used, machine/vehicle number: 11390, Year of construction: 2007, operating hours: 20,458 h, load capacity: 2,000 kg, lifting height: 1,750 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,480 mm, battery voltage: 24 V, fork length: 1,200 mm, overall weight: 886 kg, enginetype: Electric, manufacturer: Jungheinrich Bodpeyiwluefx Andsdi Serial Number: 91533054 Battery Details: 24V BJ:2019

Condition: used, Electric pallet truck, low-profile lift truck, "Ameise" (ant), drawbar stacker JUNGHEINRICH Type EJE 116 Serial No.: 98008311, Year of manufacture: 2010 Rated load capacity: 1600 kg Lifting height: 200 mm Fork length: 1150 mm Operating voltage: 24 Volt Overall length: 1750 mm Overall width: 730 mm Overall height with drawbar: 1300 mm - Battery from 2013, Type 24V 2 PzS 230 (24 Volt, 230 AH) Bdodpjyr R Dvefx Andoi - Battery automatic charger Jungheinrich 24 Volt, 30 Amp. - 2399 operating hours recorded. Weight approx. 560 kg Good condition

Condition: new, machine/vehicle number: 16048, Year of construction: 2024, load capacity: 1,200 kg, lifting height: 3,200 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 2,080 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 576 kg, enginetype: Lithium-ion, manufacturer: Bobcat Serial Number: OBWNL-002740 Bdjdpfxjykc Rrj Andoi Battery Details: 24V 60Ah

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 10,806 h, load capacity: 8,000 kg, lifting height: 6,000 mm, Forklift in very good condition. Load capacity: 8,000 kg. Lifting height: 6,000 cm. Bodpfx Aeyknlzondodi

Condition: used, machine/vehicle number: 5076540, Year of construction: 2019, operating hours: 317 h, load capacity: 1,600 kg, load center: 600 mm, fuel type: electric, mast type: other, enginetype: Electric, manufacturer: Still Bdodsyi I N Rjpfx Andoi Serial Number: F20165V0067

Condition: used, machine/vehicle number: 10799, Year of construction: 2005, operating hours: 10,010 h, load capacity: 1,600 kg, lifting height: 5,200 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, battery voltage: 24 V, overall weight: 1,300 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 90139199 Bdedpjw R Aczjfx Andoi Battery Details: 24 Volt

Condition: good (used), Year of construction: 2017, operating hours: 1,480 h, load capacity: 2,200 kg, fuel type: electric, empty load weight: 550 kg, mileage: 1,480 km, This electric pallet truck, manufactured by Hyster, is from 2017. It has a lifting capacity of 2,200 kg and is equipped with an external battery charger. It has only 1,480 operating hours. It is suitable for use with Euro pallets. Watch the video on YouTube. Bdedpjxg R Ebjfx Andsi

Condition: used, functionality: fully functional, roll diameter: 60 mm, roll width: 870 mm, roll pitch: 150 mm, total width: 952 mm, total height: 200 mm, total length: 2,395 mm, conveying length: 2,395 mm, construction width: 952 mm, construction height: 200 mm, TAF item number: 1000005560 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,395 x 952 x 200 Width incl. side panel in mm: 952 Side panel height in mm: 80 Conveyor length in mm: 2,395 Conveyor width in mm: 870 Conveyor height in mm: 90 Roller pitch in mm: 150 Substructure (rollable or with fixed supports): none Support roller axle type: IGM Support roller diameter in mm: 60 Brake roller diameter in mm: 90 Support roller per axle: 1 Support roller material: steel, galvanised Drive: gravity Net weight in kg: Special features: incl. brake roller and separation Condition: used / fully functional Bedpfx Anexca Ecjdedi Function test: OK

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,610 h, load capacity: 1,600 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 360 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load center: 600 Mast type: None Technical condition: very good Front tire type: Polyurethane Front tire condition: 100% Bjdpowgr S Ssfx Andsdi Rear tire type: Polyurethane Rear tire condition: 100% Battery voltage: 24V Battery Ah: 150Ah Battery year: 2020 Description: Factory-refurbished used device from Toyota incl. new inspection and new approval according to FEM (formerly UVV). Load protection grid, impulse control, CE certificate,

Condition: excellent (used), Variofit pallet collar, type 65, for Euro pallets, usable height 1200 mm, stackable up to 3 times. Multiple sets available. Bdedpfx Aneylknnjdoi

Condition: used, machine/vehicle number: IC1515, Year of construction: 2017, operating hours: 2,807 h, load capacity: 2,000 kg, fuel type: electric, mast type: other, fork length: 1,600 mm, enginetype: Electric, manufacturer: Jungheinrich Bdedez Dy E Nopfx Andei Serial Number: 98171838

Condition: good (used), Technical data for the pallet racking system: Racking system: Arestant Type: AS Technical data for installation: Number of racking bays: 01 unit Length per racking bay: 19,575 mm Number of bays per racking bay: 07 units Number of levels including base level: 04 units Technical data for capacity: Pallet spaces per bay: 12 units Pallet spaces per racking bay: 84 units Total pallet spaces: 84 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): 400 kg Included in the scope of delivery: 08x Pallet racking uprights, used Material color: blue Frame profile: 8808 Profile dimensions: 80 x 80 x 1.50 mm Pitch hole: 50/50 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) Height: 5,000 mm Depth: 1,100 mm 42x Pallet racking beams, used Material color: orange Box profile: 80 x 40 mm Agraffe: 4 HK (hooks) Clear span: 2,705 mm Max. load per pair of beams: 1,200 kg, with evenly distributed load. (Observe bay load) 84x Safety pins, used Bsdpfx Aez Azyusndedi Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 32x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Leveling shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2017, loading space length: 13,640 mm, loading space width: 2,490 mm, loading space height: 2,800 mm, loading space volume: 95 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 9,030 mm, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Rear doors - Lift axle - Air suspension - Sliding roof - Drum brakes = Notes = 09/2017 KRONE flatbed semi-trailer with ABS/EBS, lift axle on the 1st axle, pallet box, sliding roof, rear doors, internal dimensions: 13.64 x 2.49 x 2.80 m, Multilock, unladen weight: 6,555 kg, permissible total weight: 41,000 kg, tires 385/65-R22.5 (tread depth left: 9/8/7 mm; tread depth right: 8/9/6 mm), Dutch registration with a valid main inspection (APK) until: 01/03/2027 = Further Information = General information Year of construction: 2017 Registration number: OP-70-YR Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Drum Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread depth left: 55%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread depth left: 50%; Tire tread depth right: 55% Rear axle 3: Max. axle load: 9,000 kg; Tire tread depth left: 45%; Tire tread depth right: 40% Weights Unladen weight: 6,555 kg Payload: 34,445 kg GVW: 41,000 kg Functional Body brand: Krone SD Bedpfx Anoz S I Rqjdodi Maintenance, History and Condition APK (Technical Main Inspection): valid until 01/2027 Technical condition: very good Optical condition: good Further information Please contact Arne Honingh for more information.