Used Power for sale (39,949)

Condition: used, mileage: 1,75,000 km, power: 210 kW (285.52 HP), first registration: 12/2010, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,520 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 2629 ECONIC refuse collection vehicle with Faun Power Press 522 and Zoeller lifter - Euro 5 - * Diesel - Engine capacity: 6,374 cc - 210 kW / 290 hp - Euro 5 - Green environmental badge - * German vehicle - German registration certificate - Immediately available - From first owner - * Unladen weight: 16,050 kg - Permissible total weight: 26,000 kg - Payload: 9,950 kg * Tyres: 315 / 60 R 22.5 - Vehicle is immediately available and ready for collection - * Please schedule an appointment for viewing - Csdpfsx A Rbuex Addshf * Contact: Mr. Andreas Vogel * The information provided on the internet is non-binding and for description purposes only. * They do not constitute guaranteed characteristics. * The seller does not accept liability for typographical or data transmission errors. * Subject to change, error, and prior sale.

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. Csdpfxjx A A Sfe Addehf The unit can be inspected on site and in operation. The CHP is sold as-is, without warranty, ex location. Transport costs to be borne by the buyer.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, fuel type: gas, mast type: simplex, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, empty load weight: 12,270 kg, total length: 3,550 mm, drive type: Treibgas, construction width: 2,000 mm, LPG forklift Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Chodpfx Adjwgp Nhsdof Condition: Ready for use and fully functional Technical condition: very good Front tires type: super elastic Front tires size: 8.25-15 Rear tires type: super elastic Rear tires size: 8.25-15 Description: In addition to this Jungheinrich model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this Power+ 987 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork adjustment device, Heating, full cabin, Rotating driver's seat

Condition: used, Year of construction: 2017, machine/vehicle number: 34102117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Chsdpfx Ajtr Irwsddjf Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit Cedpfxsif Az Uj Addshf - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: used, SincoTec Model: POWER SWING 100 MOT Big Table The SincoTec POWER SWING 100 MOT is a high-performance resonance test bench designed for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) while ensuring precise control. Typical applications include lifetime testing, fatigue strength testing, and component validation under realistic conditions. With its robust construction, precise sensors, and stable granite table, the test bench is ideally suited for research, development, and quality control in both industrial and academic settings. Notes: The resonance test bench is particularly well-suited for material and component testing under dynamic loads. Technical Data: General Data – Test Bench: - Overall height: 1215 mm (without clamping fixture) - Width: 2005 mm - Depth: 1205 mm - Maximum force amplitude: 50 kN - Maximum total force: ±100 kN - Sensor accuracy: at least class 1 (according to DIN EN 10002-3) Control Cabinet: - Overall height: approx. 1800 mm - Table height: 1080 mm - Width: 650 mm (narrow tabletop) / 1420 mm (wide tabletop) Chsdpfx Adsxrlkvjdef - Depth: 700 mm - Weight: 180 kg (with granite tabletop approx. 240 kg) - Color: RAL 9006 (white aluminum), tabletop midnight Installation Requirements: - Required space: 4.3 × 3.0 m - Minimum ceiling height: 2.5 m - Floor load capacity: 2.0 t/m² - Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) - Connection: 5-pin CEE socket, 16 A - Fuse protection: 16 A - Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information provided without guarantee!) If you have any further questions, please do not hesitate to contact us by phone.

Condition: used, No. 10029 Power generator Caterpillar Olympian GEPX150 Used, year of construction 2006 Approx. 10000 working hours According to our customer, the machine is fully functional and can be inspected and tested on site Power 150 kVA Engine power 120 kW Engine speed at full power 1500 rpm Diesel engine Perkins 1006TAG Generator Leroy Somer LL 3014F Transport dimensions approx. 3600 x 1200 x 2000 mm LWH Weight approx. 2100 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Cjdpfx Ajxwdrcsddohf Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Chodpfew Rz Rqsx Addjf Hydr. self propelled drive (for moving on site) Radio remote control

Condition: excellent (used), Pneumatic power clamp Make DESTACO type 82L 3G-251C8HO used from machine dismantling length 200 mm width 35 mm height 75 mm Cedpfsq Evraox Addohf 2 x available

Condition: used, Year of construction: 2017, machine/vehicle number: 34052117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Chjdpfx Adetr Iwmsdef Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, maximum load weight: 29,520 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2020, next inspection (TÜV): 01/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2020, Equipment: ABS, SCHMITZ CARGOBULL SCB S3T ----VEHICLE HISTORY GERMAN VEHICLE TARP UNMARKED VIDEO AVAILABLE UPON REQUEST ----VEHICLE EQUIPMENT WEIGHT / REGISTRATION PERMITTED GROSS WEIGHT: 36,000 KG ----EXTERIOR DIMENSIONS LENGTH: 13.9 M WIDTH: 2.55 M ----INTERIOR DIMENSIONS LENGTH: 13.62 M HEIGHT: 2.78 M WIDTH: 2.48 M ----AXLES / CHASSIS LIFT AXLE: 1ST AXLE NUMBER OF AXLES: 3 SCHMITZ AXLES FULL AIR SUSPENSION Chodpfxoxz I Rqo Addjf ----BRAKES / SAFETY POWER CURTAIN WABCO BRAKES DISC BRAKES EBS (ELECTRONIC BRAKING SYSTEM) ABS (ANTI-LOCK BRAKING SYSTEM) ALB (AUTOMATIC LOAD-DEPENDENT BRAKE FORCE REGULATOR) ----OTHER EQUIPMENT FULLY GALVANIZED FRAME SCHMITZ SAFE ROOF XL CERTIFICATE ----TIRES TIRE TREAD DEPTH: 80% TIRE SIZE: 385/65 R22.5 ----IMMEDIATELY AVAILABLE * EXPORT SALES ONLY WITH MINIMUM DEPOSIT OF €500 - €2,000 EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries a deposit/guarantee of at least €500.00 / €1,000.00 applies) Subject to changes, errors, and prior sale! More vehicles can be found on our website. Sales are made exclusively according to our terms and conditions – see website. Important Notice – Important Information: Despite carefully checking all the details in our offer, errors may occur. Some of these may be caused by transmission errors between different platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for initiating a contract. The details provided here are without guarantee and do not constitute guaranteed properties.

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Csdpfeuv Eudsx Addshf Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), functionality: fully functional, type of input current: AC, overall weight: 160 kg, input voltage: 400 V, power: 12 kW (16.32 HP), input frequency: 60 Hz, continuous power: 12 kW (16.32 HP), continuous power (apparent): 15 kVA, Uninterruptible Power Supply (UPS) Manufacturer / Model: Riello UPS Multi Dialog 15 kVA Function: Intended for backup supply of operational power distribution or control systems; online topology. Technical parameters (approx.): Rated power 15 kVA / 12 kW; input 3×400 V AC; output 230 V / 400 V; frequency 50–60 Hz; battery string 384 V DC; efficiency ~92%; weight ~160 kg. Chodpfsxwk D Ssx Addof Condition: Physical condition good; marked as “RESERVE”.

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: LinMot, Switching Power Supply 72V/1000W Codpsxvrwdofx Addohf -Type: S01-72/1000 -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg

Condition: used, Year of construction: 2017, machine/vehicle number: 34062117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information Csdpfxstr Irdj Addehf

Condition: used, Type: POWER SWING 20 kN Cedpfexrffaox Addjhf Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: like new (used), functionality: fully functional, input voltage: 400 V, continuous power: 32 kW (43.51 HP), continuous power (apparent): 40 kVA, remaining battery capacity: 96 %, battery model: VLRA, Uninterruptible Power Supply (UPS) Chodpfxjxwkzks Addof Manufacturer / Model: Riello UPS Multi Sentry 40 kVA Function: Ensures uninterrupted power supply for critical loads (automation, control cabinets, data equipment). Operates in online (double-conversion) mode. High-class industrial UPS, still widely used. Technical parameters (approx.): Rated power 40 kVA / 32 kW; input 3×400 V AC; output 3×400 V AC ±1%; frequency 50/60 Hz; VRLA batteries (typically 32 pcs × 12 V); efficiency up to 96%; weight ~230 kg. Condition: Physical condition very good, enclosure clean, display powers up.

Condition: used, Year of construction: 2017, machine/vehicle number: 33701917A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Cedpfx Adetr Iv Todjhf Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply unit, DC, 1 channel, 2 U, 10V/240A, 2,400W, RS232, RS485 in a 19 inch housing Technical data: Manufacturer TDK-LAMBDA Power supply unit type Programmable laboratory power supply unit Used display type LED x2 Number of channels 1 Output voltage 0...10V DC Output current 0...240A Max. Power 2,4kW Rack mounting 19" Output voltage solution 1.2mV Output current solution 28.8mA Ripple and noise of the voltage (regulated) ≤8Vrms, ≤60Vpp Input connection type terminal block Manufacturer series GEN Codpfeuv E Auex Addohf Operating temperature 0...50°C Dimensions (width x height x depth) 423x43.6x432.8mm Display parameters 4 digits Software LabVIEW Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2017, machine/vehicle number: 33891917A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Cedpfjtr Irhox Addshf Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 IN: 3X400V-50Hz 14.5 KVA Cooling fan SWG 108 Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Cedpfxjdhxlgs Addshf

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Cjdpfx Ajuv Ewrjddohf Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: excellent (used), Knürr-Heinzinger Type: PHN 1200-4 Power supply Power supply unit Power Supply 1200 Volt Chodpfx Aorhiq Ijddsf 4 Ampere Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Csdpfx Adsvx Su Sedehf Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) Chsdpfew S T Rljx Addof For further questions, feel free to contact us by phone.