Used Pressure Blower for sale (16,089)

Condition: excellent (used), tank capacity: 340 l, total length: 2,450 mm, total width: 1,350 mm, total height: 1,950 mm, inner diameter: 800 mm, operating temperature: 140 °C, negative pressure: -1 Pa, Vacuum reactor model BACHMIX with a total capacity of 340 liters, manufactured by BACHILLER. Mounted on a stainless steel frame. Hydraulic system for lid lifting. Equipped with three agitation systems: Anchor-type agitator with PTFE scrapers + two axial turbine dual-blade impellers at different heights Hedpfoxn Ngtex Airjw Cowless agitator Turrax agitator

Condition: used, This listing is for 1 of 4 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. Hodexxycyspfx Airjw - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: new, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 43 kg, fuel: super 95, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 700 Operating pressure (bar) 200 Maximum pressure (bar) 250 Water connection R 3/4″ Drive type: Gasoline Engine type: G210FA Hjdpsw Exv Iofx Airjw High mobility Color: Anthracite Weight with accessories (kg) 43 Dimensions (L x W x H) (mm) 878 x 538 x 702 Scope of delivery: Kärcher Classic spray gun - M22 thread High-pressure hose: 10m Kärcher Classic lance 850mm Power nozzle 25° Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient manual start. High mobility: Large inflatable wheels for comfortable operation on difficult terrain. The compact and small device is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation mode. A crankshaft pump with ceramic pistons. The compact Kärcher HD 7/20 G Classic high-pressure cleaner without water heating is the ideal choice for beginners using gasoline-powered devices. The device can be easily transported in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 200 bar and is equipped with a durable crankshaft pump and a pumping capacity of 700 liters per hour. An integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources, inflatable wheels that ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories ensure user-friendly operation. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 7/20 G Classic's sturdy steel frame also prevents external and mechanical damage. The unit does not have the ability to draw water from alternative sources.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MRG 2500 4G, total width: 1,980 mm, total length: 5,000 mm, total height: 4,700 mm, operating temperature: 95 °C, AHENA 3 MW-os Aprítékos Acél Kazán Hjdpjua D Twefx Airsw Eladó egy teljesen új AHENA 3 MW teljesítményű acél kazán , amely négy füstjáratos rendszerrel, vízszintes füstcsövekkel és mozgó rácsos automatikus betáplálással rendelkezik. Ideális szilárd tüzelőanyagok, például fakéreg, faapríték és faforgács felhasználására. Ez a kazán kiváló választás nagy hatékonyságú és környezetbarát működéshez. Magyarországon, Cegléden található.

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Hedpfxjupyw Eo Airsw Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Year of construction: 1988, condition: good (used), Second-hand stainless steel pressure STAWAG container 30 L (brewing keg) Year of manufacture: 1988 Producer: STAWAG Useful volume: 30 L Total Ø: 400 x 370 mm Test pressure: 4,5 bar Operating pressure: 3 bar Hodpjb Tt I Aefx Airsw Operating temperature: 130 °C

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Hedpjd Nqlcjfx Airew Fan efficiency: 82.9% Shaft power: 73.8 kW Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Voltage: 400 Volt / 50 Hz Year of manufacture: 1995

Condition: new, Pressure gauge, pump monitoring device for ABEL pumps, Hodpjiyp R Hefx Airew NEW. We need the pump type / series and the machine number from you. Most spare parts available from stock. Your reliable service partner and spare parts supplier for ABEL pumps.

Condition: used, Jaw width: 125 mm Clamping width: 220 mm Hedpou Sh Huefx Airsw

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Hedpfxohy Nx Es Airjw Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: good (used), Pressure boosting cylinder, pressure boosting of hydraulic pump, hydraulic power unit, hydraulic pump, hydraulic pump Hjdpfxegw Tvae Airew -Manufacturer: Fischer, pressure booster cylinder from Fischer DHS 12/3000 guillotine shear -Shaft: Ø 65 mm -Dimensions: 1125/340/H580 mm -Weight: 326 kg

Condition: good (used), Year of construction: 2020, operating hours: 217 h, functionality: fully functional, machine/vehicle number: 62006078, operating pressure: 2,800 bar, total length: 4,670 mm, high-pressure hose length: 10,000 mm, total height: 2,540 mm, total width: 1,970 mm, pressure: 2,800 bar, empty load weight: 2,750 kg, fuel: diesel, overall weight: 2,750 kg, water tank capacity: 160 l, fuel tank capacity: 200 l, power: 160 kW (217.54 HP), volume flow: 1.62 m³/h, noise level: 111 dB, Equipment: crane, DYNAJET UHP 220 2800 | 2020 | Low Hours This DYNAJET UHP 220 2800 from 2020 is available in excellent condition and has only 396 engine hours and 216 high-pressure hours, making it a highly attractive alternative to a new unit. Delivering up to 2,800 bar and 27 l/min, the UHP 220 is designed for the most demanding water jetting applications, including paint removal, rust removal, concrete rehabilitation, and industrial surface preparation. Powered by a reliable 220 HP Volvo industrial diesel engine, the machine combines exceptional performance with low operating costs and proven durability. The integrated DYNAJET Easy Control II system allows precise pressure adjustment and simple operation, while the twin-axle trailer ensures easy transport between job sites. With its low operating hours and robust DYNAJET construction, this machine is ready for immediate work and many years of productive service. Key Features and Advantages: *Model year 2020 *Only 396 engine hours *Only 216 high-pressure hours *Operating pressure up to 2,800 bar *Maximum flow rate 27 l/min *220 HP Volvo industrial diesel engine *DYNAJET Easy Control II with colour display *Low-speed high-pressure pump with carbide plungers *Large fuel tank for extended operation Hsdsz D Ew Rspfx Airjw *Twin-axle trailer for easy transport *Ideal for paint removal, rust removal and concrete removal *Fully operational and ready for immediate use For pricing, availability, or further technical information, please contact us.

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h Hodpjz E Nh Nefx Airew M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: good (used), Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm Hjdozt Nt Ropfx Airsw -Weight: 0.9 kg/pc.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 more pieces in stock production year: 2020-22 Hjdpfx Ajq Hu Afeirsw heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Condition: like new (used), Year of construction: 2002, volume flow: 555 m³/h, power: 2.2 kW (2.99 HP), Busch SR 0400 C Volume flow: 470/555 m³/h Max diff. pressure: -47/-64 hpa(mba) Motor: 2,2kw/2,6kw rpm:2840/3400 Hodoqzzp Nepfx Airsw Part of a dry waste collection system designed for residual paper and film removal during packaging. It collects scrap pieces into the container using a vacuum created by a three-stage radial blower. The actual suction of the blower is in the center, which allows the container to fill completely. Blower and motor form a compact unit on castor wheels, suited for mobile use.

Condition: used, as good as new Hodpfx Aieztvqpersw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MClL-800?OSK+KK, input voltage: 400 V, type of input current: three-phase, type of cooling: air, total width: 2,330 mm, total length: 2,150 mm, total height: 2,800 mm, sheet thickness aluminum (max.): 2 mm, continuous operating pressure: 0.5 bar, table length: 1,150 mm, Equipment: hot water, type plate available, Industrial rotary spray washer with fume extractor and ion exchange station. Designed for washing steel, aluminum, non-ferrous metal elements with a maximum load of 250 kg and dimensions of 1000x800 mm. Technical documentation and completed swewis are available for the station. More information at the phone number. Hodpfjwnbh Esx Airow

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle Hsdpfxowr Ul Ss Airew diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar Hedjwc Afhspfx Airsw TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Hedjwc Ri Iopfx Airow Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg Hodpfxewc Rk Ee Airsw ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2026, functionality: fully functional, The pressure container is used in the pneumatic control system of various devices and is used to suppress the pulsation of compressed air in the system, securing the optimal mode of compressor work, partial removal of moisture and oil from compressed air, creating its reserve. Hedov Axzmopfx Airow Characteristics of the 1000l pressure tank A compressed air pressure tank is a cylindrical pressure device consisting of two ellipsoidal bottoms, a jacket with nozzles and valves. Its main function is to dampen pulsations in the compressed air system, which contributes to the optimal operation of the compressor and helps to eliminate moisture and oil from the compressed air. High-quality pressure tanks are particularly suitable for difficult working conditions. Our pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a solid and capacious device, ideal for storing compressed air and other gases under high pressure. It is designed to withstand high pressure and guarantee safe storage of gas. This tank is used in various industries, such as industry, construction, automotive or home workshops. It can be easily connected to an air compressor or other devices generating compressed air, providing a reliable source of gas in production processes and utility applications. With a capacity of 1000 liters, this tank allows for longer periods of operation without the need for frequent refilling. The pressure of 11 bar means that the tank is able to store gas at high pressure, which is extremely useful in applications requiring higher power. Our 11 bar 1000 L pressure tank is solidly made of high-quality materials, which guarantees its durability and safety. It also has appropriate valves and safeguards that prevent leaks and maintain a safe pressure level. What's more, our tank is supplied with complete documentation, passports, certificates and approvals, including information on the materials used in the production process. It has also passed the inspection by the Notified Body of the Office of Technical Inspection. It is marked with a nameplate with the CE symbol and the number of the Notified Body UDT. To sum up, the pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a reliable device that allows the storage of compressed air or other gases at high pressure. Its versatile use makes it a permanent source of gas for various industrial or utility applications. Our offer includes a wide selection of pressure tanks of various capacities, which makes it easy to adapt the model to the specific needs of the installation in a given plant. Our tanks are made of durable steel with increased pressure resistance and covered with a properly prepared paint on both the inside and outside. Models are available for both vertical and horizontal installation, which allows for flexible adjustment to a specific situation. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg) 230.00 Connections 8 Connection size 1/2", 2" Size 222.7 x 85 cm Tank capacity (l) 1000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 850 Height (mm) 2250 Manufacturer: Cormak

Condition: used, Year of construction: 2003, Manufacturer: Falch Hochdruck-Strahlsysteme GmbH Vehicle type: Tandem trailer Type No.: H692.03 Year: 2003 Permitted gross weight: 2600 kg Hedpow Sdxyofx Airew Axle load: 1–1300 kg / 2–1300 kg

Condition: like new (used), functionality: fully functional, The LANCO side channel blower is for sale. Hedpfov T Uzkjx Airsw Mounting plate dimensions: 260 mm x 115 mm 220 mbar 210 m3/h RPM 2850 1.5 kW