Used Pump 22 Kw 30 Cbm H for sale (89,365)

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Power isolator switch Cjdpfx Aisz E Nhvszeri 1.5 kw 5.7 m3/hr H max 60m

Condition: used, Inverter, Emerson Crodpfsy Ugyasx Aizji Please note: This is a used item. The housing is damaged.

Condition: refurbished (used), power: 30 kW (40.79 HP), type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 3,500 rpm, Used Vakumix inline homogenizer with 30 kW, horizontal design on castors – for retrofitting to existing vessels and mixing plants. For homogenizing, dispersing and emulsifying in recirculation or single pass for cosmetics, pharma, food and chemicals. EQUIPMENT • Drive power 30 kW, PLC controlled • Suction connection DN 100, discharge DN 80 • Front suction inlet DN 25 for liquids OVERHAULED • New control system • New frequency converter • All seals new incl. mechanical seal DELIVERY Crodoyf N Hvspfx Aizoi • Delivery time approx. 4 weeks, international shipping possible Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 5.5 kW -Speed: 1400 rpm -Intake volume: 160 m³/h Crjdpeb A Nf Rofx Aizoi -Weight: 240 kg

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Csdpfx Aijypcryjzeri -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

Condition: used, Extraction unit previously connected to a Kolbus three knife trimmer. Credpfxox Ah N Ns Aizji

Condition: new, power: 30 kW (40.79 HP), type of input current: three-phase, A lot of 22 NORD DRIVESYSTEMS industrial geared motors, manufactured in Germany, is available for sale. These units were originally purchased for an industrial project that was ultimately not implemented. All equipment is brand new and unused and is offered at prices significantly below the original list prices. 30 kW – 16 units • Motor: 30 kW, 1485 rpm • Gear unit: SK9052.1AZBHR • Gear ratio: i = 11.88 • Output speed: 125 rpm • Torque: 2292 Nm Cjdpfoz Aqlgsx Aizjri • List price: 9,965 € / unit • Selling price – 50% discount: 4,980 € / unit 37 kW – 3 units • Motor: 37 kW, 1485 rpm • Gear unit: SK9072.1AXBR • Gear ratio: i = 12.51 • Output speed: 119 rpm • Torque: 2976 Nm • List price: 13,280 € / unit • Selling price – 50% discount: 6,640 € / unit 45 kW – 1 unit • Motor: 45 kW, 1485 rpm • Gear unit: SK9072.1AZR • Gear ratio: i = 15.40 • Output speed: 96 rpm • Torque: 4456 Nm • List price: 13,300 € / unit • Selling price – 50% discount: 6,650 € / unit 75 kW – 2 units • Motor: 75 kW, 1788 rpm • Gear unit: SK9082.1AZR • Gear ratio: i = 17.35 • Output speed: 86 rpm • Torque: 8368 Nm • List price: 23,845 € / unit • Selling price – 50% discount: 11,900 € / unit Total quantity available: 22 units. The geared motors can be purchased individually, in larger quantities, or as a complete lot. For purchases of multiple units or the entire lot, commercial terms are negotiable.

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Codpfx Ajwp Dq Sjizori Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 53.6 kW (72.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 701 kg, input voltage: 400 V, total width: 2,250 mm, total length: 1,400 mm, total height: 1,800 mm, warranty duration: 12 months, heating capacity: 54 kW (73.42 HP), Aircooled chiller/Heat pump LENNOX GAH055SM2M 53.6 kW/54 kW Cooling capacity: 53.6 kW / 15.24 tons (12/7 — 35°C) Heating capacity: 54 kW / 15.35 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP120KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Dimensions: 1.4x2.25x1.8 m. Weight: 701 kg. Working hours: 74/58 h. Condition: Outlet Cedoz R Rhdjpfx Aizsri CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Cjdshtbdzspfx Aizsri -Manufacturer: VEB, vacuum pump type VZ30 -Drive: 1.1 kW -Flow rate: 30 m³/h -Speed: 1415 rpm -Dimensions: 730/340/H520 mm -Weight: 75 kg

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 2.2 kW -Flow rate: 60 m³/h -Max. pressure: 0.5 bar -Speed: 1420 rpm Credpfx Aijb A N T Aozsi -Weight: 100 kg

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, vacuum unit -Manufacturer: Fezer, Vacufix CL15 V vacuum pump with storage container -Suction capacity: 15 m³/h / 1400 rpm -Drive: VEM 0.75 kW -Dimensions: 1040/460/H750 mm -Weight: approx. 90 kg Credpjryak Njfx Aizsi

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 30 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,800 mm, gearing type: automatic, battery capacity: 270 Ah, battery voltage: 24 V, fork carriage width: 815 mm, fork length: 1,010 mm, fork width: 100 mm, fork thickness: 30 mm, ground clearance: 30 mm, tire condition: 100 %, overall weight: 4,200 kg, empty load weight: 2,700 kg, total height: 2,800 mm, total length: 1,950 mm, total width: 1,512 mm, color: yellow, Equipment: pallet forks, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COMBILIFT WR-4 - ELECTRIC ⚡ - DUPLEX 4500mm 📏 - Year 2017 🏷️ - ONLY 30 MTH ⏳ - FREE LIFT 🎯 - CONDITION 5/5 🌟 - LIKE NEW! 🏆 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: COMBILIFT WR-4 📍 Year of manufacture: 2017 🏗️ 📍 Lifting capacity: 1500 kg 🏋️‍♂️ Crodpj Ahwnkjfx Aizsi 📍 Operating hours: 30 MTH ⏱️ 📍 Mast type: Duplex 🚜 📍 Lifting height: 4500 mm 📏 📍 Drive type: Electric ⚡ 📍 Load center: 600 mm 🎯 📍 Total weight: 2700 kg ⚖️ 📍 Tires: Solid, like new 🛞🔄 📍 Overall height (collapsed mast): 2800 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1010 mm 🔩 📍 Free lift: 1500 mm 📈 📍 Overall height: 2800 mm 📊 📍 Total length: 1950 mm 📏 📍 Total width: 1290 mm 📐 📍 Positioner width: 815 mm 🔧 🎯 Equipment Included: 🔋 Battery 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient handling of long loads in narrow spaces, such as the wood 🪵, steel 🏗️, or pipe 🏭 industry. Thanks to its multi-directional movement function 🔄, the forklift ensures easy maneuverability and optimal warehouse space utilization 📦🚛. 🚀 Additional Features: ✔ Integrated multi-directional steering system 🔄 ✔ Comfortable operator cabin 🛋️ ✔ High reliability in intensive use 🔝 ✔ Suitable for both outdoor 🌞 and indoor 🏠 warehouse operations 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. ✔ Leasing decision in just 2 hours! ⏳ ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼

Year of construction: 2015, condition: good (used), Output: 1200m3/h motor: 2.2 kW Credpfxjrlm Ebo Aizoi

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 254 kW (345.34 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,458 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 186 kW (252.89 HP), Aircooled chiller/Heat pump YORK YMPA0260PE50 254 kW/186 kW Cooling capacity: 254 kW / 72.22 tons (12/7 — 35°C) Heating capacity: 186 kW / 52.89 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 4 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 6 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI E855DH-80D2YG (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll) Type of refrigerant: R410a Crsdpozw Enfjfx Aizoi Number of fans: 4 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo HED IE5 (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2458 kg. Working hours: 0/0/0/0/0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar Crjdpfx Aijypci Sezsi -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Condition: used, Hydraulic power unit 5.5 kW, Used machine Manufacturer: Brook Hansen Cedpfxj Ahyixs Aizsri Type: W-DA132SJ-D Overall dimensions: Width: 640 mm Depth: 500 mm Height: 1350 mm Operating pressure: 50–80 bar Electrical data: 400V; 5.5 kW; 11.5 A

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 87 kW (118.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 781 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, heating capacity: 93.3 kW (126.85 HP), AIRCOOLED CHILLER/HEAT PUMP CARRIER 30RQ 090RAPI1984 87 KW/93.3 KW Cooling capacity: 87.0 kW / 24.74 tons (12/7 — 35°C) Heating capacity: 93.3 kW / 26.53 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125, expansion vessel. Dimensions: 2.28x2.13x1.33 m Weight: 781 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Crodpfx Aiszldz Tszsi The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cooling capacity: 315 kW (428.28 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,230 kg, input voltage: 400 V, total width: 1,850 mm, total length: 5,600 mm, total height: 2,150 mm, warranty duration: 6 months, heating capacity: 350 kW (475.87 HP), AIRCOOLED CHILLER/HEAT PUMP TRANE CXCM 315 KW Cooling capacity: 315 kW (12/7 — 35°C) Heating capacity: 350 kW (40/45 — 7°C) Year of manufacture: 2017 Options: Heat pump Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Danfoss (scroll) Type of refrigerant: R410A Working hours: 4692-7121 h Dimensions: 5.60 x 1.85 x 2.15 m Weight: 3230 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Cedpfx Aoh D E R Toizsri The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 18.7 kW (25.42 HP), type of input current: three-phase, type of cooling: air, overall weight: 205 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,200 mm, warranty duration: 12 months, heating capacity: 21.7 kW (29.50 HP), Aircooled chiller/Heat pump Climaveneta I-BX-N 020T HANNV 18.7 kW/21.7 kW Cooling capacity: 18.7 kW / 5.32 tons (12/7 — 35°C) Heating capacity: 21.7 kW / 6.17 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DNB36FAEMT (scroll, inverter) Type of refrigerant: R410а Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10, expansion vessel, buffer tank. Dimensions: 1.45x0.57x1.2 m (buffer tank 1.5х0.56х0.23 m) Weight: 205 kg Working hours: 0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS Cjdpo Ahhcvsfx Aizsri - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 7,155 h, load capacity: 3,000 kg, lifting height: 3,950 mm, free lift: 1,160 mm, fuel type: diesel, mast type: triplex, construction height: 1,890 mm, fork carriage width: 1,150 mm, fork length: 1,100 mm, empty load weight: 5,025 kg, total length: 2,750 mm, drive type: Diesel, construction width: 1,300 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Csdpfx Aioz H E Ihjzsri Front tire type: Superelastic Front tire size: 2 x 23x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 200/50-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2001 Additional single hydraulic circuit, integrated side shifter, single-pedal and single-lever design, semi-cab, suitable for container handling, 1 x work light at the front

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Electric pump Equipment: - Electric pump - 6 lashing points - V-shaped drawbar, bolted Net price: €4,327.73 / Gross price: €5,150.00 Article number: CHB227281611.02 Technical data: • Brand: Hapert Trailers • Model: Cobalt HB-2 • Vehicle type: Rear-tipping trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 30 cm • External dimensions (LxWxH): 420 x 166 x 96 cm • Loading height of the floor: 66 cm • Permissible total weight: 2,700 kg • Tare weight: 647 kg • Payload: 2,053 kg • Chassis: High-loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • New side panel hinges including welded-on hooks for securing, among other things, a cargo net. • Aluminum side panels with robust, integrated locking mechanisms • Aluminum side panels anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Attachment option at all 4 corners for tarpaulin frames, grid attachments, side panel extensions or front wall extensions • Cargo net hooks on the lower part of the hinges Cedpszu N Drjfx Aizjri • Sturdy eccentric locks • Galvanized steel sheet on a multiplex floor panel • Reinforced, securely bolted V-shaped drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal supports continuously welded in • All cross and longitudinal supports rest on the floor • 6 lashing eyes recessed inside the side edge (1000 DaN/kg), TÜV certified! • U-profile on the rear, for easier attachment of the ramp • Ramp shaft prepared • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box including cover • Removable remote control for the electric hydraulics with spiral cable and battery status display • External battery charging socket for an optional 230V charger • Maintenance-free rubber spring axles from ALKO/BPW • Reverse automatic function • ALKO/BPW overrun device and parking brake • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump Equipment: - Electric pump - 6 lashing eyes - V-drawbar, bolted Net price: €3,869.75 / Gross price: €4,605.00 Article number: CHB118281611.02 Technical data: • Brand: Hapert Trailers • Model: Cobalt HB-1 • Vehicle type: Rear tipping trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 280 x 160 x 30 cm • External dimensions (L x W x H): 420 x 166 x 96 cm • Loading height of the floor: 66 cm • Permissible total weight: 1,800 kg • Tare weight: 570 kg • Payload: 1,230 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • New side wall hinges incl. welded-on hooks for attaching, among other things, a cargo net. • Aluminum side walls with robust, built-in fasteners • Aluminum side walls, anodized, double-walled • All side walls are foldable and removable • Steel corner posts, removable • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side wall extensions or front wall extensions • Cargo net hooks on hinge lower parts • Stable eccentric locks • Galvanized steel sheet on multi-layer plywood floor • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts welded throughout • All transverse and longitudinal supports lie on the ground • 6 lashing eyes, recessed inside the side edge (1000 DaN/kg), TÜV certified! • U-profile on the rear for easier placement of the ramp rails • Ramp rail shaft prepared • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Detachable remote control for electric hydraulics with spiral cable and battery status indicator • External battery charging socket for optional 230V charger • Maintenance-free rubber spring axles from ALKO/BPW • Automatic reversing • ALKO/BPW inertia braking system and parking brake Csdjzu N Dxepfx Aizeri • 13-pin plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: -6 lashing eyes -Hand pump -V-drawbar, bolted Net price: €3,655.46 / Gross price: €4,350.00 Article number: CHB227281610.02 Technical data: • Brand: Hapert Trailers • Model: Cobalt HB-2 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 30 cm • External dimensions (LxWxH): 420 x 166 x 96 cm • Loading height of the floor: 66 cm • Permissible total weight: 2,700 kg • Unladen weight: 602 kg • Payload: 2,098 kg • Chassis: High-sided trailer (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted Crodpfx Ajzu N Spjizoi DESCRIPTION • New side panel hinges incl. welded-on hooks for securing, among other things, a load securing net. • Aluminum side panels with robustly installed latches • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Socket for tarpaulin frames, grid extensions, side panel extensions or front wall extensions at all 4 corners • Load securing net hooks on hinge lower parts • Stable eccentric latches • Galvanized steel sheet on a multiplex floor panel • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in a high point load capacity • Additional longitudinal struts continuously welded • All cross and longitudinal members rest on the floor • 6 lashing eyes recessed inside the side edge (1000 DaN/kg), TÜV certified! • U-profile on the rear, for easier attachment of the loading ramps • Loading ramp shaft prepared • Solid 4-stage hydraulic cylinder • Hand pump • Maintenance-free rubber spring axles from ALKO/BPW • Automatic reversing mechanism • ALKO/BPW inertia coupling and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved -

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,071 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YMPA0160PE50 159 kW/160 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 160 kW / 45.5 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 3 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll, inverter) Type of refrigerant: R410a Number of fans: 3 pcs. (EC-fans) Credpezwutdofx Aizji Hydraulic module: 1 pcs. water pump Wilo (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2071 kg. Working hours: 0/0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.