Used Recycling Electrocables for sale (2,375)

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing Ijdpsuac Ugsfx Aiysig MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Ijdpoua D Alsfx Aiyoig Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Material feed hopper Stuffing unit TECNOVA single-screw extruder with 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Ijdpfoz A Ti Esx Aiyeig Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control A test run/sample production with your material can be arranged on short notice; details and schedule upon request. OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal.

Condition: new, power: 120 kW (163.15 HP), overall weight: 6,500 kg, Year of construction: 2025, The CUA Series efficiently separates the internal and external components of cables for recycling. The integrated system, consisting of granulation, separation, and fan units, effectively shreds and separates 99.6% of cable components. Materials can be fed manually via a conveyor belt or automatically with the SSH Series Pre-Shredding Machine equipped with smart PLC software. Its compact structure and user-friendly PLC touch-screen control panel make management easy. The CUA Series enhances durability with high-quality components and is CE-certified. Available in three models: CUA S3, CUA M3, and CUA L3. Iiodpfjd R Slasx Aiyog

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Iiodpfov S Hyvjx Aiyjg Delivery time: immediately Two discharge belts available as an option.

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Iiedpfx Ajuqmaveiysg Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). Iodpfovrw Ansx Aiyjig ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection

Condition: new, Year of construction: 2026, functionality: fully functional, RSS HD 4 Shaft Shredders in any size, Iijdpjh N Dmnjfx Aiyjg Adjustments to e.g. knives, motors, sieve, frame possible. Supply and discharge belts, storage, metal separation possible. Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem for advise or information do not wait, contact us. Delivery in consultation.

Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Li Iodjzxzxcopfx Aiysig Year of manufacture: 2013 Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Iisdpfx Aozxqpdsiyjg Pressing force: 40 t

Condition: used, Year of construction: 2014, Manufacturer: HSM Type: HL 4010 Re Iedpfjzxqkzox Aiyeig Year of manufacture: 2014 Pressing force: 40 t

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 1,53,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus Iisdpfx Ajzudwaeiyjg In very good condition.

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Iisdpfxozxzv Uo Aiysg Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 2018, Bale press and performance data Pressing force: 480 kN Specific pressing force: 58 N/cm² Drive power (motor): 11 kW Voltage/frequency: 400 V / 50 Hz (three-phase) Cycle time in idle mode: 35 seconds Theoretical throughput in idle mode: 32.81 m³/h [1] Ijdpfx Aiszxzw Ejyoig Bale and loading dimensions Maximum bale weight: up to 420–430 kg (depending on material and density) Bale dimensions (L x W x H): 1200 x 1100 x 750 mm Feed opening (W x L): 1020 x 900 mm (ideal for large boxes) Binding method: manual, with 4-fold wire wrapping Net weight of the machine: 5900 kg (5.9 tons)

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Iedpfx Ajwav Hmoiyjig Type: R100/75/V Engine Power: 75 kW Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Iijdpfx Aijz A T N Eeysg Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: repair required (used), Mill for recycling waste and plastics. Manufacturer: ALPINE AUGSBURG Type: RO 63/50 Motor power: 50 kW Feed hopper dimensions: 400 x 500 mm Included: 16 interchangeable screens with mesh sizes from 1 to 50 mm Machine dimensions: 3000 x 2000 mm Height with conveyor: 4200 mm Weight: 7000 kg Iodpfow E Nw Nox Aiyoig Technical condition: used machine, no electrical installation.

Condition: like new (used), operating hours: 185 h, functionality: fully functional, warranty duration: 12 months, power: 140 kW (190.35 HP), Features: - Dust suppression - Raised filling area - Flat bottom plate on tracked chassis Application: Classification of pre-crushed waste wood (see German waste wood classes: A1-A4), mainly as a mixed fraction, with foreign matter - ideal for thermal recycling, with full flexibility in use. Isdpfx Aistwmnnsyeig Density: 200 - 300 kg/m³, moisture: < 30 %, length: max. 500 mm

Year of construction: 2020, condition: excellent (used), Mobile screening unit TERRA SELECT T60. Screen drum length: 5.50 m Iodjz A Aamepfx Aiyjig Screen drum diameter: 2.20 m Screen drum perforation: as per agreement.

Year of construction: 1988, condition: good (used), Includes discharge screw for transporting the material. Two other smaller grinding mills are also available; if desired, all three can be sold as a package. Iiedpfsyzpx Eox Aiysg

Year of construction: 2021, condition: used, The Matho Cuttobag CB-100 is a compact, mobile cutting and extraction system for production waste such as edge trimmings and die-cut grids. It is designed as an all-in-one, stand-alone solution for production lines in the printing, label processing, packaging, and film extrusion industries. The Cuttobag reduces downtime and minimizes the manual effort required for waste disposal, as the material is directly shredded and collected. The CB-100 bag version has an integrated big bag with a capacity of approximately 300 liters. Iisdpfszzkcpjx Aiyog

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. Iiodpfx Aioxb A S Nsyog KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Iiedpot Iwt Usfx Aiyeg reactions or questions ? please with full name, company name and phone number.

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. Iodpfxowpkw Ej Aiyeig The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Year of construction: 2026, condition: new, Description: The FR8 flotation tank is designed for density-based separation of plastics in recycling washing lines. The machine separates floating materials from sinking contaminants, improving material purity before further washing, drying, or granulation processes. Suitable for continuous industrial operation 24/7. Materials: PE, PP, HDPE, LDPE, plastic flakes, films Features: Iiodpfxoyh Hx Es Aiysg Effective density separation (float/sink process) Heavy-duty industrial construction Continuous operation for recycling lines Easy cleaning and service access Ready for integration with pre-washers, friction washers, and dryers 📩 Available in customized configurations. Contact us for details.