Used Schell Mäharbeit Factory for sale (1,780)

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KT601220260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cycut, controller model: 6000, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-3000, laser hours: 80,000 h, laser power: 3,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 110 mm, pipe length (max.): 6,500 mm, table length: 7,000 mm, table width: 1,200 mm, table height: 1,800 mm, workpiece weight (max.): 80 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, 1.This is Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine, equipped with MAXPHOTONICS MFSC-3000 3000W fiber laser source and BOCHU CypCut/HypCut professional tube cutting control system. 2.It adopts heavy-duty integrated welded bed with aging stress relief treatment, dual pneumatic self-centering front & rear chucks for stable clamping, short tail cutting design to improve material utilization. 3.The fully enclosed cutting cabin with integrated dust removal system realizes low smoke, low noise and laser radiation protection, meeting industrial safety and environmental standards. 4.Full closed-loop servo drive system ensures positioning accuracy ±0.04mm/m and repeat positioning accuracy ±0.03mm/m, maximum idle moving speed up to 120m/min, matched with water cooling chiller for stable laser output. 5.The machine supports cutting carbon steel, stainless steel, aluminum alloy, brass and copper tubes, compatible with round tube, square tube, rectangular tube, oval tube, angle steel and channel steel. 6.It can complete hole drilling, bevel cutting, intersecting line cutting and blanking in one process, ideal mass production equipment for metal pipe processing factories. Item Parameter Machine Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine Laser Source Brand MAXPHOTONICS Laser Source Model MFSC-3000 Laser Power 3000W Wavelength 1080nm (±10nm) Control System BOCHU CypCut / HypCut (Tube Special Version) Structure Horizontal Heavy Bed, Dual Pneumatic Chucks Processing Tube Length Max 3000mm Clamping Range Round tube Φ10–Φ120mm; Square tube 10×10–80×80mm Positioning Accuracy ±0.04mm/m Repeat Positioning Accuracy ±0.03mm/m Max Idle Speed 120m/min Cooling Mode Industrial Water Cooling Processable Materials Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper Supported Profiles Round tube, square tube, rectangular tube, oval tube, angle steel, channel steel Fjdpsza Rm Hsfx Am Tjgd

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! Fgsdpfx Aexzth Ism Tsd INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: new, Year of construction: 2026, functionality: fully functional, ### High-Flexibility Processing for Custom Furniture Production The NANXING ND612DCT is an upgraded industrial CNC center engineered for high-precision six-sided drilling and multi-directional routing. This model is specifically designed to provide maximum flexibility for "Batch Size One" production, allowing manufacturers to handle individual custom orders with the same efficiency as mass production. ### Key Advantages & Technologies Versatile 6-Sided Processing: Capable of full six-sided drilling, front/back and side grooving, plus front/side routing in a single seamless cycle. Specialized Hardware Support: Pre-configured to process complex joinery and fittings, including Lamello joints, LogiClip connectors, wiring channels, and sky/floor door hinge mortises. Advanced C-Axis & ATC System: Features a 5.5 kW top ATC8 spindle paired with a 5.5 kW C-axis. This configuration includes a 2-slot interchangeable cross-head for 360° rotation and multi-directional side routing. Co-Linear Drilling Efficiency: The top and bottom drilling blocks are aligned co-linearly, significantly increasing processing speeds for through-holes. Industrial-Grade Build: The monolithic frame is stress-relief tempered and processed using precision Japanese SNK equipment to ensure lifetime structural integrity. ### Technical Specifications Panel Dimensions Length: 200 – 2,800 mm; Width: 50 – 1,220 mm; Thickness: 10 – 60 mm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Drilling Configuration | Top: 19 vertical, 32 X-horizontal, 22 Y-horizontal; Bottom: 9 vertical | | Main Spindles | Top: 5.5 kW ATC8 + 5.5 kW C-axis; Bottom: 3.5 kW ER25 | | Control System | SYNTEC CNC on Windows 10 platform | | Total Power / Weight | 29.2 kW / 4,900 kg | ### Standard Features & Smart Functionalities Intelligent Detection System: Equipped with high-precision sensors for automatic detection of panel length, width, and thickness to eliminate operator errors. Surface Protection: Features an automatic feeding and outfeed system with a brush device and conveyor belt to protect delicate or finished surfaces. Smart Tool Management: The user-friendly interface allows for easy tool setup and includes a life-cycle tracking function that alerts operators when tools need replacement. Open-Port Compatibility: Supports all major industry software formats, including MPR, DXF, BAN, BPP, PDX, XML, and XXL. Comprehensive Inclusions: The standard package comes with an overhead barcode scanner, mobile control console, and an air-conditioned electrical cabinet for consistent performance in any environment. ### About the Manufacturer Fedpfxoygtidj Am Tjgd NANXING Machinery (est. 1996) is a world-class leader in intelligent woodworking machinery. With professional assembly lines and rigorous quality control certified by CE specialists, Nanxing equipment delivers standardized performance and extreme durability for modern furniture factories.

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Fsdpov Sthgsfx Am Tsgd Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), functionality: fully functional, mileage: 92,126 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 05/2023, next inspection (TÜV): 07/2027, emission class: euro6, color: black, number of seats: 9, number of previous owners: 1, machine/vehicle number: RYA289, Equipment: ABS, air conditioning, airbag, all wheel drive, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, A1O Rear axle shaft make IFA BB6 Brake booster failure compensation BB7 CO2-optimized brake system BH1 Hold function 70 Pedestrian protection CL1 Steering wheel adjustable for tilt and height CL4 Multifunction steering wheel with trip computer CM2 Bumpers and attachments painted in body color CU4 Aerodynamics package E07 Hill start assist E1D Digital radio (DAB) E2R Radio generation 2 E34 Buffer battery for starting process EA4 Audio 40 ED4 AGM battery 12 V 92 Ah EL9 2-way speakers front and rear EW6 Pre-installation for Remote Services Plus EY2 Pre-installation for Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management EZ8 PARKTRONIC F61 Interior rear-view mirror F66 Lockable glove compartment F68 Heated and electrically adjustable exterior mirrors FKB Combi vehicle Fedpfszkt Srox Am Tjgd FP4 Chrome package interior G43 9G-Tronic H00 Warm/cold air duct to passenger compartment H20 Heat-insulating glazing all around HH9 Semi-automatic climate control TEMPMATIC HI1 Climate zone 1 (cold/comfort) HX1 Refrigerant R-1234Yf HZ0 Electric auxiliary heater HZ7 Semi-automatic climate control, TEMPMATIC in rear IL6 Metallic paint IN2 Wheelbase 3200 mm, long overhang J55 Seatbelt warning for passenger seat JA1 Warning lamp for windshield washer fluid level JH3 Communication module (LTE) for digital services JK3 Instrument cluster with pixel matrix display JW8 Attention Assist JX2 Maintenance interval 40,000 km K51 Misfuel protection KB5 Main tank 70 liters KP7 SCR emission control Generation 4 LA2 Light assistant LD9 Interior light(s) in rear LE1 Adaptive brake light MJ8 ECO start-stop function MK8 Speed limiter 210 km/h MO6 Emission class Euro 6D M/N1 Gr. II MS1 Cruise control MU2 Engine OM654 DE 20 LA 100 kW (136 hp) MX0 BlueEFFICIENCY package RY2 Tire pressure monitoring on front and rear axles, wireless S00 Airbag control unit Generation AB12 S02 Driver seat S23 Front passenger seat, double seat SA-Codes SA6 Airbag front passenger SH1 Thorax-pelvis sidebag driver SH9 Windowbags for driver and passenger T14 Active lock for sliding door T70 Child safety lock on passenger compartment doors T74 Grab handle for entry T75 Grab handles for entry driver and passenger U63 Passenger compartment seating: 3-seat bench, 2nd row U71 3-seat bench 1st row with foldable outer seat UR3 Quick-release seat attachment in rear V23 Deluxe interior trim V36 Roof liner V41 TPO plastic flooring in passenger compartment VF4 Caluma black upholstery VH1 Grab handles in rear VV9 Mounting points in roof frame W16 Fixed window front left in sidewall/sliding door W17 Fixed window front right in sidewall/sliding door W29 Fixed rear window W50 Double rear door, 180°, without window W70 Privacy glazing in rear, dark glass W78 Window in tailgate/rear door with wiper and washer WM0 Model update control code WN0 Factory control code X30 Registration certificate Part 2 X99 Manufacturer Mercedes-Benz AG XA5 Weight variant 3,200 kg XC9 COC papers XI3 Model year change G3-I XM0 Model update XO9 Mercedes-Benz Mobilovan with DSB and GGD Y10 First aid kit Y44 Warning triangle Z0A Key account group 1 Z3R Premium tire protection (3 years) Z42 Passenger car registration ZC5 Sales indicator 0 ZG2 Permanent all-wheel drive ZM4 Combi vehicle ZQ8 Tourer PRO

Condition: used, mileage: 62 km, power: 125 kW (169.95 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,025 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,981 mm, loading space length: 3,002 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1117. K005000 ----EQUIPMENT - Airbags: Side airbags, curtain airbags - Towbar: Pre-wiring (cable) - Exterior mirrors, folding, separately adjustable - Glove compartment with damped closing - Heated rear window - Rear window wiper with washer system - Air conditioning - Fuel tank: 70 l capacity - LED front headlights - LED rear lights with exclusive light signature - Steering wheel: Multifunction synthetic leather steering wheel - Mobile phone interface with hands-free function - Engine: Manual DPF regeneration - Package: Exterior package - Package: Driver assistance package Plus - Package: Cab seat package 47 "Fabric" - Mud flaps front and rear - Interior safety mirror, manually dimmable - Socket: 230V sockets, 400W - Partition wall made of metal, high - Trim level: Interieur Life for transporter - Doors: rear wing doors - USB sockets (2x), front center console - Central locking + Keyless Start with Safe function - 4 speakers - 4-way adjustable driver and passenger seats, reinforced - ABS - Airbags: driver and passenger airbags - Exterior mirrors electrically adjustable and heated - Exterior mirror housings and door handles in black - Batteries: AGM vehicle battery 80 Ah - Third brake light - Roof console, small - Digital cockpit - Tachometer - 3-point seat belts front - ESP - Rear parking aid - Entry sill cover sliding door, plastic - Entry grab handle passenger side - Single-tone horn - 12-pin electrical terminal strip - High beam assist "Light Assist" - Windshield in laminated safety glass - GVW: Permissible total weight 2940 - 3025 kg - Warranty: 5-year factory warranty for Germany - Alternator 230 A - Intelligent speed limiter/adaptive cruise control - Transmission: 8-speed automatic - Grab handles on roof frame - Glove compartment with lid - Rear tailgate - Heating and ventilation system in cab - Interior paneling: side paneling - Headrests (in cab) - LED twin lamps in roof liner of cargo/passenger area - LED front headlamps/Daytime running lights - LED cabin lights - LED rear lights - Paint: solid color - Steering wheel: multifunction steering wheel - Headlight range adjustment - Narrow center console - Mobile phone interface - Driver fatigue and distraction detection - Emergency brake assist with pedestrian and cyclist detection Fedsy N If Hopfx Am Tsgd - Emergency call system eCall - Package: Exterior package - Package: Cab seat package, checkered fabric - Wheel covers - Radio with 13" (33 cm) touch color display - Tire pressure monitoring system - Particulate filter and AdBlue tank - Sliding door on passenger side - Front mud flaps - Power steering - Seats: passenger seat - Lane keeping assist "Lane Assist" - Front and rear bumpers in black - Partition wall made of metal, high - USB in cab (2) - First aid kit, warning triangle and 2 warning vests - Traffic sign recognition and wrong-way warning - Lashing eyes for cargo securing (8) - Prepared for VW Connect - Electronic immobilizer - Heat-insulating glazing - Central locking + Keyless Start without Safe function - Registration: Full vehicle registration ... and much more. ----The vehicle is not reconditioned! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Financing / leasing possible even without down payment! Do you have any questions? We are happy to advise you!

Condition: good (used), functionality: fully functional, mileage: 92,126 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 05/2023, next inspection (TÜV): 07/2027, emission class: euro6, color: black, number of seats: 9, number of previous owners: 1, machine/vehicle number: RYA289, Equipment: ABS, air conditioning, airbag, all wheel drive, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, A1O Rear axle shaft make IFA BB6 Brake booster failure compensation BB7 CO2-optimized brake system BH1 Hold function 70 Pedestrian protection CL1 Steering wheel adjustable for tilt and height CL4 Multifunction steering wheel with trip computer CM2 Bumpers and attachments painted in body color CU4 Aerodynamics package E07 Hill start assist Fgsdpezkq Scefx Am Tod E1D Digital radio (DAB) E2R Radio generation 2 E34 Buffer battery for starting process EA4 Audio 40 ED4 AGM battery 12 V 92 Ah EL9 2-way speakers front and rear EW6 Pre-installation for Remote Services Plus EY2 Pre-installation for Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management EZ8 PARKTRONIC F61 Interior rear-view mirror F66 Lockable glove compartment F68 Heated and electrically adjustable exterior mirrors FKB Combi vehicle FP4 Chrome package interior G43 9G-Tronic H00 Warm/cold air duct to passenger compartment H20 Heat-insulating glazing all around HH9 Semi-automatic climate control TEMPMATIC HI1 Climate zone 1 (cold/comfort) HX1 Refrigerant R-1234Yf HZ0 Electric auxiliary heater HZ7 Semi-automatic climate control, TEMPMATIC in rear IL6 Metallic paint IN2 Wheelbase 3200 mm, long overhang J55 Seatbelt warning for passenger seat JA1 Warning lamp for windshield washer fluid level JH3 Communication module (LTE) for digital services JK3 Instrument cluster with pixel matrix display JW8 Attention Assist JX2 Maintenance interval 40,000 km K51 Misfuel protection KB5 Main tank 70 liters KP7 SCR emission control Generation 4 LA2 Light assistant LD9 Interior light(s) in rear LE1 Adaptive brake light MJ8 ECO start-stop function MK8 Speed limiter 210 km/h MO6 Emission class Euro 6D M/N1 Gr. II MS1 Cruise control MU2 Engine OM654 DE 20 LA 100 kW (136 hp) MX0 BlueEFFICIENCY package RY2 Tire pressure monitoring on front and rear axles, wireless S00 Airbag control unit Generation AB12 S02 Driver seat S23 Front passenger seat, double seat SA-Codes SA6 Airbag front passenger SH1 Thorax-pelvis sidebag driver SH9 Windowbags for driver and passenger T14 Active lock for sliding door T70 Child safety lock on passenger compartment doors T74 Grab handle for entry T75 Grab handles for entry driver and passenger U63 Passenger compartment seating: 3-seat bench, 2nd row U71 3-seat bench 1st row with foldable outer seat UR3 Quick-release seat attachment in rear V23 Deluxe interior trim V36 Roof liner V41 TPO plastic flooring in passenger compartment VF4 Caluma black upholstery VH1 Grab handles in rear VV9 Mounting points in roof frame W16 Fixed window front left in sidewall/sliding door W17 Fixed window front right in sidewall/sliding door W29 Fixed rear window W50 Double rear door, 180°, without window W70 Privacy glazing in rear, dark glass W78 Window in tailgate/rear door with wiper and washer WM0 Model update control code WN0 Factory control code X30 Registration certificate Part 2 X99 Manufacturer Mercedes-Benz AG XA5 Weight variant 3,200 kg XC9 COC papers XI3 Model year change G3-I XM0 Model update XO9 Mercedes-Benz Mobilovan with DSB and GGD Y10 First aid kit Y44 Warning triangle Z0A Key account group 1 Z3R Premium tire protection (3 years) Z42 Passenger car registration ZC5 Sales indicator 0 ZG2 Permanent all-wheel drive ZM4 Combi vehicle ZQ8 Tourer PRO

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NCG3021L(LL) is a high-performance CNC nesting machining center engineered for automatic cutting, drilling, grooving, and part labeling, all within a fully integrated and automated workflow. This model incorporates automated loading, unloading, and labeling systems, delivering comprehensive automation, intelligent operation, and IT-driven production efficiency. Its open software interface enables seamless connectivity with furniture design suites and ERP platforms, ensuring fully optimized and data-driven panel processing. The professional FCC optimization software enhances cutting efficiency, minimizes material waste, and facilitates streamlined production management. This machine represents an ideal solution for advanced furniture manufacturing by reducing labor expenses while maintaining high standards of precision and productivity. Key Features - Automatic loading and unloading system equipped with a 3-ton lift table, pre-push device, and safety curtains for efficient material handling. - Rotary labeling system with integrated Honeywell printer, facilitating simultaneous labeling and machining operations. - Robust vacuum worktable (3100×2150 mm) segmented into 10 independently controlled zones, guaranteeing powerful and uniform vacuum suction. - Dual 7.5 kW oil-cooled vacuum pumps deliver maximum suction power at low noise levels. - High-rigidity gantry frame ensures enduring precision and operational stability at high processing speeds. Fgodpfx Amoxcwnbj Ted - Italian-made 12 kW main spindle (HSK-63F, ATC, 24,000 rpm), featuring internal and external air blast for optimal dust extraction. - 12-position automatic tool changer (ATC) enables rapid tool changes, supporting a wide range of complex machining tasks. - 21-spindle drilling block designed for precise vertical and horizontal drilling operations. - Automated lubrication system minimizes maintenance needs and prolongs component life cycle. - Advanced dust extraction system with front and rear collection points maintains a clean working environment. - Comprehensive safety design includes a protective fencing system and optional optical barrier for maximum operator security. - User-friendly SYNTEC CNC control system compatible with MPR, DXF, TCN, and standard NC file formats. Technical Specifications - Working area: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Worktable height: 1010 mm - Maximum traverse speed: X/Y axes 70 m/min, Z axis 20 m/min - Main spindle: 12 kW, HSK-63F, 24,000 rpm - Tool changer: 12-position servo-driven ATC - Drilling block: 21 vertical spindles, 2.5 kW, 4000 rpm, max drilling diameter 35 mm - Vacuum pump capacity: 2 × 7.5 kW, 250 m³/h - Total installed power: 47 kW - Machine dimensions: 13,800 × 3,950 × 2,600 mm - Weight: 6,000 kg - Power supply: 380V / 50Hz / 3-phase Applications - Panel furniture manufacturing (kitchen cabinets, wardrobes, office furniture) - Nesting-based cutting and drilling of MDF, particleboard, and plywood - Automated production lines with integrated labeling for Industry 4.0 smart factories Advantages - Complete solution: automated loading, nesting, drilling, grooving, labeling, and unloading in a single workflow. - Outstanding efficiency: optimized software paired with dual synchronized gantries doubles processing throughput. - Labor saving: minimal operator involvement required. - Ideal for large-scale production: stable operation, precise machining, and consistently superior product quality.

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Fgedpfx Amoxcwwpj Tsd Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: used, functionality: fully functional, mileage: 3,63,600 km, power: 331 kW (450.03 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Fgsdpfszf Nx Rsx Am Tsd Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: new, PRICE: 1800 EUR The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 850× 450× 850mm Electrical power: 0.12kW Volume: 60 liter Fodpsikvrdofx Am Tsgd Delivery time: immediately after the advance payment (100%)

Condition: new, The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation Fgedpfx Aoikvrtom Tsd It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 1100× 550× 900mm Electrical power: 0.75kW Volume: 150 liter Delivery time: immediately after the advance payment (100%)

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need. Fgjdpfx Ajt Hwqqem Tod

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 678, functionality: fully functional, power: 1,400 kW (1,903.47 HP), input voltage: 380 V, input frequency: 5,060 Hz, type of input current: three-phase, table width: 400 mm, table length: 500 mm, total length: 1,700 mm, total width: 2,100 mm, total height: 1,500 mm, overall weight: 1,300 kg, Equipment: CE marking, safety light barrier, Transmatic CA 1000 – 6 Stations (late 2019 model) This is an automatic rotating carousel heat press in excellent condition – almost like new – with very few operating hours. The machine is fully operational and is still installed in our production line, maintained to professional factory standards. It offers high efficiency and productivity, capable of producing approximately 7,500 pieces per day with only 2 operators, making it ideal for companies focused on transfer printing and high-volume textile applications. Fjdpfx Aszi Sm Sjm Tsgd Key Features: - Automatic 6-station rotating carousel system - Very low usage (limited production hours) - Plate dimensions (50cm x 40cm) - High production capacity (~7,500 pieces/day with 2 operators) - Precise control of temperature, pressure, and timing - Reliable and consistent output - No additional investment required – ready for immediate use.

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES Fgodpfx Aozi Strom Tjd - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: Fgodpon Hqmmefx Am Tsd As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: used, mileage: 34 km, power: 125 kW (169.95 HP), first registration: 07/2026, fuel type: diesel, overall weight: 3,225 kg, color: white, gearing type: automatic, number of seats: 5, total length: 5,450 mm, total width: 2,032 mm, total height: 1,967 mm, loading space length: 2,004 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 36971 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Trailer hitch, electrically swiveling * Cargo area floor: Vinyl floor covering "Easy Clean" * All-season tires (suitable for winter) R19. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" snowflake symbol and are therefore approved for use in winter. * Side wall paneling, high, incl. rear door paneling * Seat Package 7 - Driver's seat, 4-way manually adjustable - Single passenger seat, 2-way manually adjustable - Lumbar support for driver - Seat heating for driver and passenger - Driver's seat, with adjustable interior armrest - Passenger seat, with interior armrest - Side airbags, left and right - Head/shoulder airbags, front, left and right - Fabric upholstery Plus Style, seat center section in Black Onyx, rest in Ebony ADDITIONAL EQUIPMENT * 2-stage unlocking, passenger compartment, cargo area * ABS electronic with EBD * Airbag (passenger side) * Airbag driver side * All-wheel drive * Exterior mirrors, electrically adjustable and heated * Exterior mirror housing, plastic, black * H7 AGM single battery * Floor, rubberized * On-board computer * Roof, flat * Roof console * Double-wing rear door with door hinges - can be unlocked to 168 degrees * Rev counter * Third brake light * Electronic safety and stability system * Vehicle modem * Window, fixed, 2nd row * Power windows, front * Parking brake, electric * FordPass Connect - incl. live traffic information and 5G WLAN hotspot - Information on the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the FordPass app - Current traffic information in real time (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * 8-speed automatic transmission * Grab handle, driver and passenger side * Glove compartment with lid * Interior lighting, passenger compartment * Interior lighting, front * Automatic climate control, front * Fuel tank 55 l * Solid paint finish * Cargo area lighting (LED) * Steering wheel, plastic * Center console, small * Driver fatigue warning * Emergency assist * Technology Package 2 (Trend) - Ford audio system with 13-inch multi-function display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver fatigue warning, camera-based - Traffic sign recognition system - Wrong-way driver warning - Lane Keeping Assist incl. Lane Keeping Aid - Park Pilot system, front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Diesel particulate filter * 4 speakers * Wheel hub covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5 J x 16 m.215/65 R16 * Rear lights, halogen * Gear selector on the steering column * Windshield wipers with rain sensor * Headlights with LED low beam Fsdpfxjziv Uge Am Tegd * Sliding door, right * Side wall paneling, half-height * Power steering * Seat belts * Rear seat package 1 - 2nd row with 3-seater bench - Headrests (3) * Start-Stop system * Ford Power Start function * Double cab partition * Door handles, plastic, black-gray * USB connection for the 2nd row of seats * Auxiliary heating * Lashing points * Immobilizer * Heat-insulating glazing, light tint * Central locking with remote control ... and more ---- 1st owner. German version. Errors and prior sale excepted. 2 years factory warranty from date of first registration (can be extended on request). We will gladly accept your vehicle in trade.

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system Fgjdozi Duhjpfx Am Ted - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg Fjdpfxjzi Dhbe Am Tjgd - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) Fgedezi Da Ropfx Am Tjd A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 2019, functionality: unexamined, spindle bore: 82 mm, turning diameter: 560 mm, turning length: 1,900 mm, quill stroke: 150 mm, quill diameter: 75 mm, total length: 3,830 mm, total width: 1,750 mm, total height: 1,620 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 7 rpm, overall weight: 2,850 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 8 m/min, workpiece weight (max.): 400 kg, three-jaw chuck diameter: 250 mm, KRAFT TURNING CENTER ZDM 560Z × 2.000 – USED, TECHNICALLY ALMOST LIKE NEW A KRAFT turning center ZDM 560Z × 2.000, manufactured in 2015, from a private owner. Since its purchase, it has only been operated in a maximum of one shift, and in practice, significantly less. Identical in design to our current new machines ZDM 560, but at a fraction of the cost of a new investment. From a business liquidation. On-site inspection is possible at any time and is highly recommended. KEY FEATURES - SIEMENS SINUMERIK 828D basic T with ShopTurn workshop programming, including 2 electronic handwheels - Automatic 4-position tool turret AK21, tool change time 2.4 s - Fixed steady rest Ø 10-200 mm and traveling steady rest Ø 20-100 mm as standard - Manual tailstock MK 5 - Automatic gearbox, 3-speed STANDARD EQUIPMENT - CNC control SIEMENS SINUMERIK 828D basic T / ShopTurn - 4-position tool turret AK21, electrically programmable - 3-jaw chuck Ø 250 mm, hard jaws - Fixed + traveling steady rest - SIEMENS X/Z servo motors - Door interlock, interlocked chuck guard, 2 halogen machine lights - Automatic coolant and lubrication system - German + English operating manual, CE declaration of conformity CONDITION - OPENLY COMMUNICATED Originally, a chip conveyor was installed (see order confirmation 2016). This is no longer present, and the machine is currently operating with a chip tray. Retrofitting a chip conveyor is possible upon request for an additional charge. Sold "as is, where is", no warranty. On-site inspection or a video call is strongly recommended, and an independent functional and accuracy assessment is available upon request. OUR SERVICE Online or on-site factory inspection at the previous owner's location · Transportation arranged upon request · Assembly, commissioning and operator training by our service technicians · direct German-speaking contact person for spare parts and support · Member of FDM, the German association for wholesale trade in machinery and tools. Fgedpszi Dadsfx Am Ted As this is a unique item, sale is subject to prior sale. Call us or send a brief message, and we will arrange an inspection appointment as soon as possible.

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter Fgedpezkv R Djfx Am Tjd • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: not inspected (used), Industrial Engraving and Identification System, Dot Peen Marking Machine, MARKATOR MV5 Automatic Industrial Dot Peen Marking Station with Rotary Axis / Safety Enclosure, Markator MV5 SE-MK, Used Machine Manufacturer: MARKATOR Manfred Borries GmbH (Germany) Type: MV5 SE-MK Control unit type: MV5 SE-MK power unit with integrated display and industrial keyboard control panel Overall dimensions: Width: 1220 mm Depth: 1930 mm Height: 2100 mm Clamping range: 19–23 inch Premium-class German-made MARKATOR professional industrial marking station (dot peen marking station). This complete machine system represents the highest level of durable and precision factory marking technology for metal and plastic components. A special feature of the equipment is the integrated rotary unit (chuck / rotary table) and the enclosed safety cabin. Thanks to this design, the machine is suitable not only for marking flat surfaces, but also for automatic circumferential and peripheral marking and serial numbering of cylindrical parts, shafts, discs, pipe fittings, and gears. Fgodpfx Aszauf Hem Tod The dot peen (micro-percussion) marking technology provides extremely durable marking without weakening the material structure.

Condition: as good as new (ex-display), Submersible Waste Water Pump, Drainage Pump, KSB Ama-Drainer A 405 SD/10, New/Unused Machine in Box Manufacturer: KSB Aktiengesellschaft (Frankenthal, Germany) Type: AMA-DRAINER A 405 SD/10 S-H Overall dimensions : 290 x 290 x 520 mm Design: Submersible drainage/waste water pump with stainless steel housing Fedpfxoza Td Io Am Tegd Power output: 0.76 kW Rated current: 1.70 A Voltage / Frequency: 380–415 V 3~ (Three-phase) • 50 Hz Flow rate (Q): 2–21 m³/h Delivery head (H): 9.3–3 m Max. liquid temperature: T40°C Insulation class: Classe F Enclosure class: IP 68 (Max. immersion depth: 10 m) Standard: EN12050-2 Country of origin: Germany Designed for long service life under continuous operation. Suitable for drainage, wastewater handling, and emptying pits or tanks. Comes in its original factory packaging with cable.

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Overall dimensions: Width: 700 mm Depth: 550 mm Height: 890 mm Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Fjdpfx Amjy Udfme Tjgd Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.