Used Scrap Bailer And Shear for sale (9,359)

Condition: used, Year of construction: 2007, Technical details: Iiodpfx Aasu Icmhobjh throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 60 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 40 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm Iiodpsu Icl Rsfx Aabsh -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: used, Year of construction: 2016, operating hours: 4,589 h, 2016 | Hyundai HX330L with demolition boom, standard boom & shear | Used Demolition Excavator | 4589 hours 📍Location: France, Corcelles-en-Beaujolais 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Isdpfx Aoxmb N Rsaboih Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 68 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine was in good working order at time of inspection it has Small boom 4.30 stick3.20 large boom size in the inspection is all so fitted with air compressor which blows air in front of the main window screen to clear dust is fitted with rock guards on roof and front screen. New hydraulic pump changed 100 hours ago. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35653 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: as good as new (ex-display), The KMT M 1303 Guillotine Shear from KNUTH is engineered for precise and reliable cutting, making it an essential tool in the Sheet Metal Processing category. Featuring a robust solid steel construction, this modern plate shear is equipped with a powerful drive motor that allows for efficient operation. With its straight cutter angle, it minimizes workpiece torsion during cutting while providing a high-precision manually adjustable back gauge for exact positioning. The dual-sided reversible upper cutters and four-edge lower cutters enhance the lifespan and versatility of the machine. Ergonomically designed, the bright LED illumination of the cut line and a clear view from above ensure accurate alignment. A mobile foot switch offers operators the flexibility to manage the workpiece safely, while essential features such as a cut counter and accessible lubrication points promote efficient maintenance. This reliable and powerful Guillotine Shear is perfect for your workshop needs—request a quote today to enhance your Sheet Metal Processing capabilities with the KMT M 1303. Isdpfoww Uaaox Aabjih

Condition: ready for operation (used), Year of construction: 2007, operating hours: 18,500 h, functionality: fully functional, machine/vehicle number: MH 3725, cutting force: 600 t, power: 180 kW (244.73 HP), empty load weight: 96,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 96,000 kg, cutting length (max.): 7,100 mm, Hydraulic scrap shear Taurus 600 t, Type C672P.EB2L Year of manufacture: 2007 Operating hours approx. 18,500 Filling box: 7100 mm Drive: 2x 90 kW Ijdpexpnlwofx Aabeih Lid force: 3000 kN 4x side cylinders Hold-down device Central lubrication system Control: PLC Oil heating available Remote control and operation from operator panel possible Throughput for mixed scrap: 10–17 t/h Very fast and high-throughput machine Including Pramac generator GSW455V 420 kVA from 2017

Condition: used, Year of construction: 2004, machine/vehicle number: CUT170, overall weight: 2,500 kg, Please submit inquiries exclusively by email or directly via Machineseeker. Ijdpfsxm Rn Nox Aabjih

Condition: excellent (used), Year of construction: 2006, operating hours: 8,900 h, functionality: fully functional, machine/vehicle number: 050036, cutting force: 1,230 t, Scrap shear and press with a cutting force of 1,200 tons. Electric version – 5 DC motors, each 90 kW. The modular system design allows fully autonomous operation, enabling the shear and the crushing mechanism to operate independently. Isdjxc Iq Hjpfx Aabjih

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, cutting force: 900 t, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Iiodexg Ekfjpfx Aaboh

Condition: ready for operation (used), operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 36290, cutting force: 650 t, overall weight: 62,080 kg, table length: 6,000 mm, table width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iedjw Nv Dispfx Aaboih Performance and forces Shear force: 650 t Power consumption: 200 kW Working range Chamber length: 6,000 mm Closed chamber width: 781 mm Loading table dimensions: 6,000 x 2,500 mm MACHINE DETAILS Weight including table: 62,080 kg Operating hours: 8,000 Note: The machine will be available from 01.03.2026.

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Infeed dimensions 650mm x 250mm Iisdjwu Nwnspfx Aaboh with infeed vibrating trough

Condition: excellent (used), Year of construction: 2013, operating hours: 16,800 h, functionality: fully functional, cutting force: 600 t, power: 242.71 kW (329.99 HP), Lefort Mobile 600 Tons Shear force: 600 t Hold-down force: 120 t Pusher force: 180 t Lid closing force: 240 t Box height: 600 mm Box width: 800 mm Box depth: 6000 mm Ijdpfx Aeuptrpjabeih Available immediately

Condition: used, Please send inquiries exclusively via email or directly through Machineseeker. Overall dimensions L 4600 mm Iedpfx Aexmwmlsaboih Overall dimensions W 2500 mm Overall dimensions H 1600 mm

Condition: like new (used), Year of construction: 2024, operating hours: 130 h, A scrap shear in like-new condition is being sold. The machine can be inspected at any time. The machine has its own chain drive. Ijdpfx Aswn Tvheabeih

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 1,15,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Ijdpfxsuptmyj Aaboih Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: good (used), Year of construction: 2000, operating hours: 27,000 h, functionality: fully functional, For sale is a scrap shear in good condition, including a Mayfran conveyor belt and an electric Fuchs excavator. Iedpewivcmjfx Aaboih The machine can be inspected at any time. Please contact me if you are interested.

Condition: refurbished (used), Year of construction: 2006, operating hours: 100 h, functionality: fully functional, cutting force: 650 t, power: 169.16 kW (229.99 HP), Sierra 650 SL Pre-compression: 100 t 230 HP Cummins 6-cylinder turbo diesel Shear capacity – 7 cuts per minute with empty shear head 4 cuts per minute with 24-inch cuts Shear output – 12–16 tons per hour Bale size – 32" x 24" x variable Iiedpfxovbq Ens Aaboh Bale weight – average 900 lbs Bale throughput – 10–13 tons per hour Package size – 32" x 24" x variable

Condition: good (used), Year of construction: 2010, operating hours: 4,100 h, functionality: fully functional, machine/vehicle number: 354, For sale is a scrap shear in good condition, at a reasonable price. The machine can be inspected at any time. Please contact me if interested. Accessories: One set of new blades. Iiedpfxowiu T De Aabeh

Condition: repair required (used), Year of construction: 2007, functionality: limited functionality, cutting force: 950 t, Necessary repair: 1x pump needs to be replaced TECHNICAL DETAILS Ijdpjvm Amhjfx Aabjih Diesel engine: Deutz

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,200 h, functionality: fully functional, machine/vehicle number: MH 3729, cutting force: 800 t, power: 300 kW (407.89 HP), empty load weight: 1,20,000 kg, Very fast and high-throughput machine TECHNICAL DETAILS Cutting force: 800 t / 7,740 kN Cutting width: 950 mm Cutting height: 650 mm Rammer force: 90 t Number of shear strokes: 4 - 5 1/min Throughput for mixed scrap: 15 - 30 t/h Filling bed length: 7,100 mm Filling bed width: 2,400 mm Width of the closed filling bed: 880 mm Height of the closed filling bed: 600 mm Side cylinders per cover: 3 pieces Maximum cover force (per cover): 300 t / 3,000 kN Feed force: 160 t / 1,600 kN Oil tank: 6,000 l Maximum working pressure: 360 bar Control: PLC Main motors: 4 x 75 kW Motor for pilot pump: 1 x 4 kW Iedpfx Aaev Ditvjbsih Motors for cooling circuit: 1 x 5.5 kW Motors for cooling fan drive: 2 x 1.1 kW MACHINE DETAILS Overall length: 18,500 mm Overall width: 3,300 mm Dimensions of cabin: 1.5 x 1.5 m Weight: approx. 118 t EQUIPMENT - Hold-down device - Central lubrication system - Radio control & operation from control panel possible - Control panel, mounted in cabin, containing: Emergency stop piping button Selector switch for manual or automatic operation Control elements for manual operation Control elements for automatic operation

Condition: new, functionality: fully functional, Year of construction: 2025, There are several types of ball mill grinding plants designed for different applications and industries. The choice of the specific type depends on factors such as the material being processed, the desired final product characteristics, and the production capacity required. Here are some common types of ball mill grinding plants: 1. Open Circuit Ball Mill: - In an open circuit ball mill, the material passes through the mill only once, and the finished product is obtained directly. This type is suitable for dry grinding and often used for cement grinding. 2. Closed Circuit Ball Mill: - Closed circuit ball mills have a separator, which separates the fine particles from the coarse ones. The coarse material is returned to the mill for further grinding, while the fine product is collected and sent to storage. This type is commonly used in mineral processing circuits. 3. Overflow Ball Mill: - Overflow ball mills discharge the slurry over a trunnion at the discharge end. This type is suitable for wet grinding or when the slurry has a high moisture content. 4. Grate Discharge Ball Mill: - Grate discharge ball mills discharge the slurry through the grate at the discharge end. This type is suitable for dry or wet grinding and is often used for grinding materials with high moisture content. 5. Peripheral Discharge Ball Mill: - In a peripheral discharge ball mill, the grinding chamber is larger at the feed end, allowing the material to be discharged peripherally. This type is suitable for coarse grinding and often used for rod mills. 6. Planetary Ball Mill: - Planetary ball mills are designed for high-energy milling and are suitable for both dry and wet grinding. They have one or more grinding jars that rotate around a central axis, creating a planetary motion. This type is often used for laboratory applications. 7. Ball Mill with Ceramic Lining: - Some ball mills are lined with ceramics to reduce wear on the inner surface of the mill. This is particularly common in the production of ceramic materials, pigments, and refractories. 8. High-Energy Ball Mill: - High-energy ball mills use mechanical alloying processes to create new materials. These mills operate at high rotational speeds, causing the balls and the material being ground to impact with high energy. They are suitable for milling hard and brittle materials. 9. Air-Swept Ball Mill: - In an air-swept ball mill, the material is fed into the mill with ambient air, and the finished product is collected in a dust collector. This type is commonly used for coal grinding in the cement industry. 10. Tube Mill: Iodeq Nx Alopfx Aaboih - Tube mills are long cylinders with a charge of steel balls used for grinding raw materials, coal, and clinker. They can be open or closed circuit and are widely used in cement and mineral processing industries. 11. Continuous Ball Mill: - Continuous ball mills operate continuously, and the material to be ground is fed at one end and discharged at the other. These mills are suitable for grinding materials in a continuous process.

Condition: used, Year of construction: 1978, Droop and Rein LFAS130KE Milling Machine Axes: X (Table travel) 3,000 mm, Y (Cross-Rail vertical travel) 1,000 mm, Z (Milling Head Saddle on Cross-Rail travel) 1,500 mm, U (Boring Bar vertical travel) 300 mm. Axes Feeds: X min 20 mm/min, max 2,000 mm/min; Y min 20 mm/min, max 2,000 mm/min; Z min 20 mm/min, max 2,000 mm/min; U manually. Note: The X, Y, Z axes are equipped with linear encoders. On the control panel there is a display unit (DRO) for the X, Y, Z axes. For the U axis, direct viewing on a graduated ruler is used. Moving Table Load: max. 20,000 kg/m (uniform distribution on table surface). Moving Table usable surface: 4,000 × 1,600 mm. Moving Table total surface: 4,900 × 1,600 mm. Distance between Table and Cross-Rail: max. 1,200 mm. Iiodjxnc N Ispfx Aabeh Machine Weight: approximately 50,000 kg. Overall Dimension of the Machine: L × W × H = 10,000 × 5,000 × 5,300 mm. Machine was made by DROOP & REIN, Germany, in 1978. Accessories include a 4-position at 90-degree Milling Head. Retrofitted in 2000 Coolant System: Yes. Not functional.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 110283-110155, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. Iiedpfx Aequuv Isaboh S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Year of construction: 2008, condition: good (used), The system was used by Mondelez before. It is too large for our needs. Iodpomnm I Refx Aabeih ncludes: 3 trough sections at 5.5 m 1 shute system 4.5 m 3 shute sections at 3 m (with motorized O ring) 4 trough sections at 2.2 m 2 trough sections at 1.3 m 7 vibration platforms model FB-RPG26ES-4 (FastBack) 8 vibration platforms model TLA30H66394_00 (FastBack) 1 control panel 6 electrical panels (Heat and Control) 6 conveyor belts with 50 cm width and 4 m length 6 conveyor belts with 30 cm width and 2 m length 5 elevated conveyor belts with 15 cm width and 3 m length 1 90-degree conveyor belt with 30 cm width and 2 m length Comes with documentation.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Provides up to 2.5 cubic meter of temporary storage space. We have two in stock IDEAL APPLICATIONS: Potato chips Tortilla chips Delicate snack foods Crackers Iiedpfxst E Hzpj Aabjh Cookies Candy.

Condition: good (used), Heat and Control FastBack, Model# CV-FB-260E, Serial# 3318, Pan Dims 330 cm' L x 80 cm W Iiedpfx Aet T Ehkjabsh We have two of these.