Used Sem London for sale (3,730)

Condition: ready for operation (used), SEM MT30Z4-85 ferrite brushed DC servomotor SN:G12677 + encoder SD-253-510W, used, normal signs of use, 100% functional, delivery as shown in the photos Pjdst S Amzspfx Abpsra

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: SEM Andras, brushless servo motor type HR115A6-88S -Speed: 6000 rpm -Voltage: 530V -Torque: 3.7 Nm -Shaft: Ø 19 x 40 mm -Brake: 24VDC 10Nm Prsdehu Hxcopfx Abpoa -Number: 2 engines available -Price per piece -Dimensions: 275/115/H145 mm -Weight: 7 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor Predpfx Abshu Hwqopoa -Manufacturer: SEM, Brushless servo motor type HR142G6-88S -Speed: 6000 rpm -Voltage: 530 V -Torque: 21 Nm -Shaft: Ø 24 x 50 mm -Brake: 24 VDC 40 Nm -Number: 2 motors available Price: per piece -Dimensions: 425/142/H174 mm -Weight: 23.8 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm Prjdjcv Siqspfx Abpja -Power: 4.5 Nm -Design: B14 -Shaft diameter: Ø 16 mm -with Hohner encoder 267AB -Number: 1 motors available -Price: per piece -Dimensions: 400/100/H145 mm -Weight: 9.3 kg

Condition: used, DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor Prodpfx Abstrzphepoa -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm -Power: 4.5 Nm -with gearbox ratio: 1:10 -Design: B14 angle -Shaft diameter: Ø 25 mm -with Hohner encoder 11322 Psdpfx Ajcwb Nrebpora -Quantity: 1 motor available -Price: per piece -Dimensions: 480/260/H180 mm -Weight: 10.3 kg

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 Prsdpjttnt Isfx Abpsa -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Condition: ready for operation (used), SEM MT30F4-52 Ferrite Brushed DC Servomotor SN:J13270 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Prsdpst S Al Djfx Abpea

Condition: ready for operation (used), SEM MT30U4-57 Permanent Magnet DC Servomotor SN:F03088, used, normal signs of use, 100% functional, scope of delivery as per photos Predpfxet S Ambj Abpoa

Condition: ready for operation (used), SEM MT30Z4-85 Ferrite Brushed DC servo motor SN:L9813 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Predpfx Abst S Anxspsa

Condition: ready for operation (used), SEM MT30U4-57 Ferrite Brushed DC Servomotor SN:J2514 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Predpfx Abjt Ttkmopoa

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 167, Format (cm): 58 Pjdpshu R U Djfx Abpera Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 8675, This LSK157 packing machine of model 8675 is offered in excellent operation condition. The machine is fully functional. Year of construction : 2003 Podet Aikzjpfx Abpora

Condition: good (used), Emergency stop switch, emergency stop switch, rope pull emergency switch Psdozt H T Ujpfx Abpjra -Manufacturer: Kiepe, cable pull emergency stop switch -Type: SEM 001 -Dimensions: 270/160/H130 mm -Weight: 5.3 kg

Condition: ready for operation (used), Year of construction: 1988, A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible. Podpfxsu Afzwo Abpjra

Condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control, inverter driving control, driving control -Manufacturer: Zapi, inverter drive control from electric forklift Sichelschmidt M 1510 V -Type: SEM-1 -Mat no.: 7020 0442 FS5002 -Voltage: 48V Prodpfxoizugns Abpsa -Dimensions: 210/150/H70 mm -Weight: 1 kg

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Podezd Ufaepfx Abpjra Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: ready for operation (used), Grinding width 600 mm First rubber roller Second rubber roller + shoe with manual adjustment 2 conveyor feed speeds Pneumatic oscillation Paper 1520x600 380 V Year of production 2001 Pedpfx Ajw Drfmsbpora

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine Perfect condition, manufactured in 2021. Only 3,636 bindings used. Semi-automatic spiral binding machine from the German company RENZ: • Controlled by a touchscreen display • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustment from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • KA-300 Hanger Feeder • Quiet operation. The machine does not require a compressor. • Working width: 105-500 mm • Mobile, easy to move Pedpfxezur His Abpora • Includes a receiving table • No special operator training required 230V power supply Weight: 550 kg

Condition: used, Year of construction: 1998, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1998 1 automatic belt sander with combination unit with electronic articulated pressure beam For sanding soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Grinding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal With patented CSD articulated pressure beam for compensating for workpiece tolerances of up to 2 mm Grinding width 1350 mm Grinding belt length: 2150 mm Grinding belt speed, frequency-controlled: approx. 2–18 m/sec Grinding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt discharge 490 l/min Extraction connection: 180 mm Prjdpfxjzk Nxze Abpoa Air requirement for grinding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power requirement approx. 17 kW Weight approx. 2,500 kg Dimensions WxDxH 2090x1670x2020 mm The machine is yet to be fitted with a new pre-lift belt Availability: by arrangement Storage location: Röllbach

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm Predpfex N A Aaox Abpoa – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Pjdpfx Aozuzhijbpjra Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: Prjdpfx Abjzuzg Eopea RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal Podpfozuzb Ajx Abpsra 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, EMC network filter 3 x 62 A Prsdpfx Asy Ugg Tsbpsa 480 V