Used Side Forklift for sale (25,934)

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 20,800 mm, total length: 7,890 mm, - Drehbarer Teleskopstapler RTH 6.21 Lredpfx Aoy T Srljqvol - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft 6000 kg - höhe 25.90 m - Maximale seitliche Reichweite 21.70 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Crab Modus - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Tier 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ Lrjdpfey T Srfex Aqvsl - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie / Batteriekapazität 2 x 12 V / 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift 2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse - Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l -Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 d

Condition: new, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 4,860 mm, fork length: 1,200 mm, total length: 3,350 mm, - Bedienung: Sitz - Lastschwerpunkt: 500 mm - Lastabstand 388 mm - Achslast mit Last vorn/hinten: 4860/623 kg - Achslast ohne Last vorn/hinten 1689/1794kg - Spurweite vorn/hinten 942/172 mm - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/6 ° - Höhe über Schutzdach (niedrige Variante) 2035 (1949) mm - Sitzhöhe/Standhöhe 965 mm - Kupplunghöhe 473 mm - Gabelträger DIN 15173, Klasse/Form A, B: ISO II A - Arbeitsgangbreite bei Palette 1000 x 1200 quer 3390 mm Lrsdey T Sq Uspfx Aqvsl - Arbeitsgangbreite bei Palette 800 x 1200 längs 3516 mm - Wenderadius 1678 mm - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) mit Last 16/16/20 km/h - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) ohne Last km/h 16/16/20 - Hubgeschwindigkeit mit Last 0,45 m/s - Hubgeschwindigkeit ohne Last m/s 0,63 - Senkgeschwindigkeit mit/ohne Last 0,48/0,41 m/s - Zugkraft mit/ohne Last N 4800/5000 - Max. Zugkraft mit/ohne Last N 11900/8700 - Steigfähigkeit mit/ohne Last 15/18,1 % - Max. Steigfähigkeit mit/ohne Last 23/27 % - Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) mit Last 5,8/5,5/5,3 s - Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) ohne Last 5,4/5,1/4,8 s - Betriebsbremse Elektrisch/mechanisch - Fahrmotor, Leistung S2 60 min kW 2 x 6,5 - Hubmotor, Leistung bei S3 15 % kW 11 - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43531 - Batteriespannung V 48 - Energieverbrauch nach EN 16796 kWh/h 4,6 - Umschlagleistung t/h 155 - Energieverbrauch bei Umschlagleistung kWh/h 6,2 - Arbeitsdruck für Anbaugeräte bar 240 - Ölmenge für Anbaugeräte l/min 26,5 - Schallpegel, Fahrerohr dB(A)

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 15,390 h, load capacity: 2,000 kg, lifting height: 3,060 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 1,940 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,655 kg, total length: 1,970 mm, drive type: Elektro, construction width: 1,100 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Mast type: Duplex Condition: Ready for use and fully functional Lrodpfx Ajy T Sy Neqvjl Technical condition: very good Front tires type: super elastic Front tires size: 200 50 -10 Rear tires type: super elastic Rear tires size: 140 55-9 Battery voltage: 48V Battery Ah: 750Ah Battery year of manufacture: 2022 Description: In addition to this Jungheinrich model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing on favorable terms are possible for us at any time. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EFG220 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, Heating, full cabin, full free lift,

Condition: used, Year of construction: 2023, load capacity: 4,500 kg, lifting height: 17,550 mm, total length: 7,400 mm, · Kippwinkel 10 ° · Schüttwinkel 107 ° · Lenkart: 2-rad Lenkung, 4-rad Lenkung, Crab Modus Lsdpjy Tzf Uefx Aqvjrl · Stützentyp: Flügeltyp · Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig · Hersteller: Deutz · Motornorm: Stage V / Stufe 4 · Motor Modell: TCD 3.6 L4 · Nennleistung Verbrennungsmotor / Leistung (kW): 55.92 kW / 55.40 kW · Max. Drehmoment / Engine rotation (min): 405 Nm @ 1300 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 4 - 3620 cm³ · Kühlsystem des Motors: Wasserkühlung · Anzahl Batterien / Batterie / Batteriekapazität: 2 x 12 V / 120 Ah · Battery starting current: (EN)850 A · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 2 · Max. travel speed: 25 km/h · Zugkraft: 9400 daN · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen: 44.50 % / 44.50 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge: 116 l/min · Hydraulikdruck: 275 bar · Motoröl: 11 l · Hydrauliköl: 144 l · Fassungsvermögen des Kraftstofftanks: 130 l · Lärm und Vibrationen: Geräuschpegel im Fahrerstand (LpA): 68 dB · Außenschallpegel (LwA): 106 dB · Vibrationswert an Händen/Armen: < 2.50 m/s² · Diverse Lenkräder (vorne / hinten): 2 / 2 · Steuerungen: 2 Joysticks · Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) standard

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,052 h, load capacity: 15,000 kg, lifting height: 3,180 mm, fuel type: diesel, mast type: simplex, construction height: 2,940 mm, fork carriage width: 1,700 mm, fork length: 1,100 mm, empty load weight: 25,060 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,000 mm, Compact forklift – Diesel Load center: 600 Fork width: 160 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Lsdpfxsy Tzqqj Aqvjrl Front tire size: 40x20x30 Rear tire type: Solid tires Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ATAIR IV D 150CV Super Compact. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner Fork positioner opening range: 350/1120 mm Heater, full cab

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,127 h, load capacity: 1,600 kg, lifting height: 4,400 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 20 - 40% Battery voltage: 48V Battery year: 2018 Lodpsxzvxvofx Aqvorl Description: Price includes new UVV safety inspection and new paintwork, rear tires will be replaced, NEW BATTERY (year 2026, incoming), matching charger with plug, We are happy to organize affordable transport for you. Leasing with purchase option available! We are an official Jungheinrich Germany partner. Sideshift, 3rd valve, front work lights, roof guard, full free lift, CE certificate, safety light,

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 2,618 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, construction height: 2,550 mm, battery capacity: 620 Ah, battery voltage: 80 V, DGUV certified until: 05/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, LINDE E 20 electric forklift with the following specifications: · Operating hours: 2,618 Ljdpfxoy Uci Rj Aqvjrl · Lifting capacity: 2,000 kg · Lifting height: 4,000 mm · Overall height: 2,550 mm · Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, good battery, very good tires (rear tires new; not yet mounted in the photos), duplex mast with full free lift, side shifter, 4th valve, multi-lever control, two-pedal operation, lighting, fork length 1,200 mm, charger. Includes service according to LINDE manufacturer's specifications and a valid UVV inspection. Due to the low operating hours and the good battery, the unit is in excellent technical condition. However, if used frequently in very confined spaces, the steering cylinder should be overhauled and the rear axle re-bushed (parts are available and included in the price / additional cost for assembly on request). Optional cosmetic refurbishment available for an extra charge. Inspection, demonstration, and test drive are possible by prior telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs on request). Further information and offers can be found on our website.

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller Lrodpfxoy R Dzme Aqvol - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7734 TECHNICAL DATA - Shaft width: 630mm - Max. thickness of workpiece: 230mm - 4-knife planing shaft * from above: - Anti-kickback fingers - Toothed feed roller - Pressure bar Lrodjy R A Uxjpfx Aqvjl - Planing shaft - Pressure bar - 2 smooth, driven outfeed rollers * from below: - Adjustable roller in bottom table - Motor approx. 7.5kW - Stepless feed speed adjustment - Extraction port diameter: 145mm - Dimensions (LxWxH): 1250x1300x1300mm - Weight: 908kg ADVANTAGES – Italian manufacture – Very good condition – Used thickness planer Net price: 21,900 PLN Net price: 5,200 EUR based on 4.2 EUR exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Rotating forklift Manitou MRT 3570 vision ES Drive Diesel Year built 2026 Lifting height (mm) 34,700 Ljdpfoy Tp N Iox Aqvjrl Lifting weight (kg) 7,000

Condition: used, Year of construction: 2022, load capacity: 4,990 kg, lifting height: 4,425 mm, fork length: 2,400 mm, total length: 4,311 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 Ledpfxoy Tp Nze Aqvsrl - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Lrodpfx Aqey Tp Nuevjl Drive Diesel Year built 2026 Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,800 mm, total length: 9,050 mm, Rotating forklift Magni RTH 6.26 Drive Diesel Year built 2026 Lifting height (mm) 25,800 Lodpfx Aqey Tp Nnsvorl Lifting weight (kg) 6,000

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 4,960 h, load capacity: 4,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Ljdpfxey T S Exs Aqverl Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 40 - 60% Side shifter, 3rd valve, rear work light, front work light, heater, full cabin.

Condition: used, functionality: fully functional, machine/vehicle number: A20300086, Year of construction: 2010, operating hours: 17,850 h, load capacity: 33,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,000 mm, power: 181 kW (246.09 HP), fork length: 2,500 mm, empty load weight: 45,680 kg, drive type: Diesel, Heavy-duty forklift – Diesel Chassis number: A20300086 Load center: 1200 Mast type: Standard Condition: Refurbished, no warranty Technical condition: good Front tire type: Pneumatic Front tire size: 16.00-25 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 16.00-25 Rear tire condition: 80 - 100% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container forklifts, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at favorable terms are always possible for us. We would also be happy to buy your used equipment outright, even without you purchasing a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop specializes in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Side shifter, 360° rotating device = 360° turnable forks, quick change fork system = quick change system, camera, central lubrication system Lrsdpfey T S Tiox Aqvsl 3rd valve, 4th valve

Condition: used, functionality: fully functional, machine/vehicle number: B20700136, Year of construction: 2019, operating hours: 17,060 h, load capacity: 33,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,000 mm, power: 185 kW (251.53 HP), fork length: 2,500 mm, empty load weight: 45,680 kg, drive type: Diesel, Heavy-duty forklift - Diesel Chassis number: B20700136 Load center: 1200 Mast type: Standard Transmission: Dana TE17000 Condition: Refurbished, no warranty Technical condition: good Front tire type: Pneumatic Front tire size: 16.00-25 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 16.00-25 Rear tire condition: 40 - 60% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at fair conditions are always possible for us. We would also be happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will gladly provide you with detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop specializes in the repair and maintenance of large equipment from 8 tons upwards. We will also gladly display your vehicle for consignment sales. Side shifter, 360° rotator = 360° turntable forks, Quick change system, Camera, Central lubrication system Ledjy T S Tcopfx Aqvsrl 3rd valve, 4th valve.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,324 h, load capacity: 4,000 kg, lifting height: 3,446 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery voltage: 80V Ljdpfsy T Sztsx Aqvjrl Battery type: PzS Battery year of manufacture: 2020 Description: The vehicle will be inspected according to UVV standards. Before delivery, the machine will undergo maintenance and cleaning. Upon request, the machine can be painted for an additional charge. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab.

Condition: excellent (used), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg Lrodpjy Rzkfsfx Aqvjl ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 6765 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm Number of spindles: 4: 1) Horizontal lower: 230mm, 5.5kW 2) Vertical right: 160mm, 5.5kW 3) Vertical left: 160mm – electrically adjustable left/right from the control panel, 5.5kW 4) Horizontal upper: 230mm – electrically adjustable up/down from the control panel, 7.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm Top: - 6 toothed feed rollers, including 2 double rollers - 2 rubber feed rollers Bottom: - Toothed feed roller, metal, torsion-resistant, in the lower bed + - Smooth metal feed roller - Rollers are pneumatically adjustable - Length of the feed bed (with pneumatic feeder): 3390mm - Can be operated without engaging the pneumatic feeder; the bed is adjustable up/down - Central lubrication - Electric adjustment of planing thickness - Smooth adjustment of feed speed - Feed on Cardan shafts - Feed motor: 4kW - Enclosed in a cabinet - Diameter of dust extraction port: 4x120mm - Dimensions (L/W/H): 7000x1950x1700mm, weight approximately 3000kg - For wet and dry wood - Pneumatic feeder on the feed table - Used planer, very good condition Lrjdpfoy Rzgyex Aqvel Net price: 83,900 PLN Net price: 19,980 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: Ledpfxoy Rzf Nj Aqverl - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6575 TECHNICAL DATA - max. width of the workpiece: 230mm - max. height of the workpiece: 170mm - 7 spindles: 1) horizontal lower, 230mm, 11kW Ljdpfx Ajy Rzamsqverl 2) vertical right, 170mm 3) vertical left, 170mm (2 and 3 spindles), 11kW 4) horizontal right, 170mm, 5.5kW 5) horizontal upper, 230mm, 11kW 6) horizontal lower, 230mm, 7.5kW 7) universal, 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 with electric adjustment - ATS (Automatic Thickness Setting) - spindle diameter: 40mm - electric brakes - 4 toothed infeed rollers from above, including 1 double roller - rubber double infeed roller from above - rubber double outfeed roller from above - 2 smooth metal infeed rollers from below - double rubber infeed roller from below - feed on Cardan shafts - pneumatically pressed rollers - stepless feed speed adjustment: 6-24m/min - feed motor: 5.5kW - electric adjustment of planing thickness - body lifting motor: 0.55kW - central lubrication of the table - diameter of dust extraction nozzles: 7x140mm - dimensions (L/W/H): 5800x2050x1850mm - weight approx.: 4500kg ADVANTAGES - German production, WEINIG brand - 7 heads - universal spindle - with ATS - for wet and dry wood - used planer, very good condition Net price: 146900 PLN Net price: 34980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - max. width of workpiece 220mm - max. height of workpiece 130mm - 8 spindles: 1) horizontal lower 220mm 5.5kW 2) vertical right 130mm 7.5kW 3) vertical left 130mm 7.5kW 4) vertical right 130mm 5.5kW 5) horizontal upper 220mm 11kW – 5th spindle adjustable electrically up/down 6) horizontal lower 220mm 5.5kW 7) horizontal lower 220mm 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360° 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed rollers, toothed double rollers + 1 single - 3 outfeed rollers, smooth double rollers + 3 single - meter counter – from below: - infeed roller, toothed, driven, swiveling in the lower table - 3 metal rollers, driven, smooth - feed rate on Cardan rollers - rollers with pneumatic pressure - stepless feed rate adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the table - diameter of dust extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg ADVANTAGES – with 8 heads – universal spindle – ideal for wet and dry wood – German production, WEINIG brand – unpainted – very few operating hours – used planer, in perfect condition Lrodpjy Ry Uiefx Aqvjl Net price: 145900 PLN Net price: 34750 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalogue number: 7894 TECHNICAL DATA - Min / max working width: 20 / 165 mm - Min / max working height: 8 / 100 mm 4 spindles: 1) Lower horizontal, 165 mm, 4 kW 2) Right vertical, 100 mm, 4 kW 3) Left vertical, 100 mm, 4 kW 4) Upper horizontal, 165 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 6 driven, toothed infeed rollers (including 3 double rollers) - 2 driven outfeed rollers, smooth rubber From below: - Side pressure before and after the lower feed roller in the table - Lower infeed toothed, driven, swiveling roller in the table before the first spindle - 2 side pressure units - Driven outfeed roller, metal, smooth - All rollers pneumatically pressed - Length of infeed table: 1770 mm - Table height adjustment up/down - Central lubrication - Electric thickness adjustment Lrsdpfx Aqjy Ry S Ievsl - Lifting motor: 0.75 kW - Stepless feed speed adjustment - Feed motor: 3 kW - Feed via cardan shafts - Enclosed in cabin - Extraction connection diameter: 4 x 130 mm - Dimensions (LxWxH): 3200 x 1700 x 1850 mm - Weight: 2800 kg ADVANTAGES – 4-head configuration – Ideal for wet and dry timber – Infeed toothed, driven, swiveling roller in the lower table before the first spindle – Original DTR technical documentation + CE – Used machine, excellent condition Net price: 49,900 PLN Net price: 11,880 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg Lrsdpfsy Ry Ivjx Aqvol ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)