Used Soma for sale (71)

Condition: excellent (used), Year of construction: 2016, Soma Bulldog die-cutter machine 75-90mm cutting die tools Ijdpfexnl N Dsx Aabebc

Condition: good (used), Year of construction: 2015, Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm if not specified otherwise for optional accessories Air core diameter 76.510 mm Repeat steel lock 310 mm Max. print length 600 mm OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Sophisticated system for print control FAST BLADE - system for doctor blade exchange in the machine INKSTORM - automatic wash-up system (option) Bosh Rexroth INDRAMAT direct drive technology JOB MANAGEMENT - preparation of future jobs from remote PC PRINT QUALITY CDTS - central drum thermal stabilization system DYNAMIC IMPRESSION - printing deck impression electronic compensation system Machine design with emphasis on high printing stability Composite graphite cores (option) EASY OPERATION Intuitive touch display (Touch Screen) Easy access to web path Doctor blade chambers with FAST BLADE system for blade quick exchange in the FASTBLADE machine FASTADAPT - doctor blade chamber position automatic adaptation CORONA, AHLBRANDT - 4 kW Side control before printing Printing unit 8-printing deck unit Central drum with diameter of 1,450 mm Gas dying system Printed material cooling unit Unit with cooling cylinder and servo drive Web guiding system prior to the rewind unit Web fault control system BST SUPER HANDY SCAN 4000 chip digital camera Iodpfx Aaotuc R Hsbebc Rewind unit NONSTOP 800 rewind unit For roll max. diameter of 800 mm Roll clamping using pneumatic expansion shaft

Condition: used, Year of construction: 2013, functionality: fully functional, Rubber solution mixing unit with compact agitator and inline mixer for free-flowing rubber-toluene mixtures or ther liquids. ATEX certified Version EX II 1/2G c IIB T3 Inline mixer with thermo-siphon system Type 450LS Silverson Mixing output (water): 25.000 l/h Motor speed: 3000 rpm Compact agitator Type ARW-2081 (EX) Ibodpfx Ajxphk Hsaboc Motor speed: 129 rpm Agitator shift diameter: 30 mm Measurements Measurements (LxWxH): 1800 x 1000 x 1710 mm Weight approx.: 1320 kg

Year of construction: 2000, condition: good (used), Parts shown by hand not included. 1350 mm length, D 480 mm, Iedpfx Aajpy Eqmjbobc

Condition: used, Year of construction: 2010, Make RASOMA Model DZS 250-2 Year of Build 01.2010 Technical Details: Control SIEMENS SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Technical Details: Control CNC » SIEMENS » SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Ijdpjkyth Iefx Aabobc Tailstock No Chuck diameter max. 260 mm Sled path X (per sled) approx. 900 mm Slide path Z 400 mm Turning spindle unit Spindle head A 6 (DIN 55026) Diameter in the front bearing 120 mm Spindle bore 38.1 mm Main drive Motorized insertion spindle with AC built-in motor, water-cooled, infinitely variable lubrication Lifetime grease drive power at 100% ED 28.3 kW at 40% ED 36 kW Speed ​​range 3500 rpm Torque on the turning spindle max. at 100% ED 300 Nm Feed drive X-axis via linear motor 1FN3 Rapid traverse speed 100 m/min Feed force 6915 N Z-axis via 1FT6 AC servomotors Rapid traverse speed 30 m/min Ball screw diameter 40 mm Feed force » 8 kN Tool system Disk turret tool holder mount VDI 40 tool positions 12 tool disk SW 320 position measuring system X-axis incremental linear length measuring system LC 183 Compressed air connection 6 bar Dimensions Length 5.276 mm Width 2.400 mm Height 3.310 mm

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 21400508, total length: 5,000 mm, conveyor belt width: 1,500 mm, heating capacity: 36 kW (48.95 HP), Very well-maintained TESOMA COMPACT drying tunnel, Iodpoxcl Hrjfx Aabsbc - 3-meter drying canal - 5-meter conveyor belt - 1.5-meter belt width - Electrically operated / 61A / 40kW connected load - All data sheets available - Further information upon request - ATTENTION / Belt infeed and outfeed as well as the ventilation motor are currently dismantled

Condition: refurbished (used), Thieme / Tesmoa UV screen printing tunnel (1 lamp), fully refurbished. Belt width: 700 mm Ibsdpfx Ajxk T Hcsabsc Year: 2003 Sartech is a company specializing in screen printing, automation, and robotics solutions, and manufactures UV (electronic) or hot air curing tunnels.

Condition: not inspected (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, overall weight: 6,200 kg, Fanuc 21IMB spindle BT 40, 10,000 rpm Iedpfxjxfbuqs Aabsbc travel 800X600X600MM tool changer weight 6,200KG

Condition: used, Year of construction: 2017, functionality: fully functional, total length: 6,000 mm, total width: 2,000 mm, conveyor belt width: 1,700 mm, Tesoma dryer, year of manufacture 2017: fully operational, major maintenance in 2022 including replacement of the flame tube, last maintenance in 2025 – everything in order. Technical data: total length approx. 600 cm, width approx. 200 cm, belt width 170 cm, infeed approx. 115 cm, outfeed approx. 85 cm, drying zone approx. 180 x 400 cm. Iedpfjxcu Irex Aabsbc

Year of construction: 2005, operating hours: 11,111 h, condition: used, functionality: fully functional, For sale: Used, fully functional double-shaft counter-current mixer – versatile application The machine was in continuous operation until recently and was only replaced by a newer model. It is in good, well-maintained condition. Regular servicing has been performed – at least once annually. This system is ideally suited for the production and processing of UV stabilizers, but can also be used in the manufacture of food or animal feed. Thanks to its robust construction and versatility, it is suitable for use across various industrial sectors. On-site inspection is possible at any time by appointment – see for yourself the condition and performance. For further information or if you are interested, we look forward to hearing from you. Iodpfxjxb Sxre Aabebc

Condition: used, Profile projector ISOMA Ibodpfjxbt H Dex Aaboc

Year of construction: 1992, condition: good (used), Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 7, gearing 1/8”CP Between station 1 and 2, there is a turner bar equipped with web guide Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder 4 x 255 l/cm volume 4,5 cm³/m² 6 x 140 l/cm Lateral register:± 5 mm Isdsrakb Repfx Aabsbc Longitudinal adjustment: Unlimited at all printing and die cutting stations, selectectable from mobile control console, smallest adjustment 0,05 mm. Web inspection:Tecscan web inspection system Drying: Optimized hot air drying Laminating station: Station 8 is a laminating station that consists of a foil unwinding unit, where web guiding ensures the foil is directed straight to the adhesive station. Following the adhesive station, air drying is employed to dry the adhesive and the laminating nip is located in this section. Die-cut station: 2 rotary die cutting stations Die cutting length: 6”-24” 152, 4 -609,6 mm Rewinder : Ø 1000 m, max. weight 300 kg

Condition: ready for operation (used), Year of construction: 2012, A Somatech carton and tray erecting machine is available. Cycle output: 60 cycles/min. The machine has been fitted with new tools and a new linear unit. Documentation available. On-site inspection is possible. Ijdpfx Aajwnr Naobebc

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance Y-axis: 3,000 mm, controller manufacturer: Siemens, controller model: Sinumeric, number of axes: 2, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item by 31.07! TECHNICAL DETAILS Axle Data Maximum vertical axle load: 180 kg Maximum horizontal axle load: 40 kg Y-axis travel: approx. 3,000 mm Motor / Gearbox Motor (Siemens): 1 FK 7083 (V-axis) / 1 FK 7032 (U-axis) Standard gearbox: Alpha SP 100 (V-axis) / Alpha SP 60 (U-axis) Nominal speed: 3,000 rpm (V-axis) / 6,000 rpm (U-axis) Maximum operating speed: 3,000 rpm (V-axis) / 4,500 rpm (U-axis) Nominal torque: 10.5 Nm (V-axis) / 0.85 Nm (U-axis) Gear ratio: 10 (V-axis), 10 (U-axis) Chain and Sprocket Chain transmission ratio: 17/19 = 0.8947 Effective gearbox speed: 335.3 rpm Sprocket module/profile: 3/4” (V-axis) / 3/8” (U-axis) Number of teeth on drive sprocket: 17 (V-axis) / 26 (U-axis) Pitch diameter: 103.7 mm (V-axis) / 79.02 mm (U-axis) Drive sprocket circumference: 325.77 mm (V-axis) / 248.24 mm (U-axis) Speeds and Acceleration Maximum main axis speed: 1.82 m/s (V-axis) / 1.85 m/s (U-axis) Maximum acceleration: 3 m/s² (V-axis) / 3.36 m/s² (U-axis) Y-axis travel: approx. 3,000 mm MACHINE DETAILS Dimensions & Weight Cell dimensions (W x D x H): 1,250 x 2,475 x 2,150 mm Iodpfxswykx Ro Aabebc Cell weight (incl. control unit and power supply, excl. attachments): 2 t Electrical Data Phase: 3~ / 50 Hz Operating voltage: 230/400 V Control voltage: DC 24 V External voltage: DC 24 V Rated current: 17 A Rated power: 12 kW Protection: 25 A EQUIPMENT With gripper arm

Condition: used, Year of construction: 1996, turning diameter 400 mm turning length 915 mm control NUM Type 1062 T total power requirement 12,5 kW weight of the machine ca. 5500 kg Ibsdpfx Aot Hw Szeabec dimensions of the machine ca. m

Condition: used, Year of construction: 2011, Passage width: 3000 mm. Passage height: 30 mm. Inlet section to the system: Length approx. 2250 mm. Outlet section: Length approx. 3970 mm. Total length: approx. 10,220 mm. Ibedpfxowptxle Aabec

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, input voltage: 400 V, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, input current: 22 A, Equipment: documentation/manual, Tesoma Compact-Eight-G-18-HH-SR - continuous dryer (gas connection) Ideally suited for digital print products (DTF, transfers). Price includes the exhaust chimneys (approx. 7.5 m each) in double-walled stainless steel design. The machine is assembled and connected. Ibjdovxr D Hepfx Aabec It can be inspected on site after an appointment has been made. The price only refers to the assembled system. The price does not include disassembly/assembly or delivery costs. If requested, a contact can be provided who can organize disassembly, transport and assembly if necessary.

Year of construction: 1995, condition: excellent (used), Numerical control lathe SOMAB MOD. OPTIMAB 400 Year of construction 1995 "CE". Used in excellent conditions. Turning length 1000 mm. Turning diameter on guides mm 400. Ibjdpfehuapgox Aabjc Turning diameter above the slide mm 220. CNC NUM Mod.Somab PL+S3. Spindle hole: mm 43. Spindle speed : Rpm 80 - 4500 Motorized turret : nr. 12 positions. Weight : Kg 6000 Installed power : Kw 25 Machine dimensions (without chip conveyor): mm 2750 x 1805 x 2085. Chips evacuation device supplied. Turret tools supplied.

Condition: ready for operation (used), Grid plate X/Y: 342mm/424mm, viewing window X/Y: 280mm/200mm, max. component dimensions X/Y/Z: 342mm/424mm/275mm, Z-axis: 235mm, machine dimensions X/Y/Z: approx. 600mm/550mm/810mm, weight: approx. 90kg. Controller & marking head: LP-RV200P, laser type: FAYb, laser class: 4, wavelength: 1.06µm, average output power: 20W, marking dimensions X/Y: 90mm/90mm, working distance: 190mm, writing speed: 12m/s, conveyor belt speed: 240m/min. Integrated pilot laser included. Documentation available. On-site inspection is possible. The system is dismantled and packed ready for delivery. Ijdpfx Aasv Rftfebobc

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm Iedpfx Aovdt N Ijabobc number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), The profile projector is used in the precision industry to solve measuring and inspection tasks that cannot be solved at all or not as economically with other methods. ISOMA profile projectors are suitable for series inspections (full inspections or spot checks), as well as for measuring and inspecting individual parts (e.g. in toolmaking). The workpiece is imaged exactly to scale at a certain magnification. Profile shape and distances can be compared with reference drawings of corresponding precision or measured directly with the scale. Deviations from nominal values, or any distances on the workpiece can be accurately determined using the precision measuring stage. Ibedpol Skayefx Aaboc Power supply: 230 VAC Dimensions W x D x H: approx. 850 x 1500 x 2100 mm Weight: approx. 370 kg

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Has been in use very little, only approx. 200 running hours plant consists of: Ibedpfsu Nu I Tjx Aabsc - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Year of construction: 1988, condition: used, Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments CARVING SIDED WITH MECHICZNYM FEED, TABLE Header 400 mm. The machine is equipped Pile GRADING AND FACE CUTTER control of the desktop, has a smooth ADJUSTMENTS FEED POSSIBILITY OF WORK CYCLE MANUAL AND AUTOMATIC MAIN ENGINE Isdpfx Aaecrl Rlsbebc 5,5 kW MOTOR SAW GRADING 2.2 kW FACE AND FEED ENGINE 1.2 kW clamps on the table automatically tighten detail pneumatically. Fixing detail and The machine automatically releasing a very good stem diameter 35 mm HEIGHT 180 mm depth MILLING CUTTING MATERIAL SAW SAW CUTTING 140 mm.POSSIBILITY MILLING THE TABLE ANGLE

Condition: good (used), Year of construction: 2000, GALLUS ARSOMA EM 510 – 3-color Technical Specifications: • Model: Gallus Arsoma EM 510 • Year of Manufacture: 2000 • Web Width: 510mm • Printing Units: 3 x UV FLEXO UNITS or 2+1 (backside) printing possible • Die cutting units: 1 • UV drying: Included • Web Turnbar (Turner Bar): Included • Web Cleaning: Included • Roll-to-Sheet Conversion:Included • Unwinder: Included • Rewinder: Included • Chiller: Included • Web Guiding System: Included Accessories Included: • Magnetic Cylinders: Included • Printing Cylinders: Included • Anilox Rollers: Included • Condition: Regularly serviced and well-maintained _____ Technical and Optical Condition: Ibsdpfxewmfyie Aabec • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 1993, condition: good (used), Machine Specifications and Equipment:  Machine type: Arsoma EM 410  Year of construction: 1993  Maximum web width: 410mm  Inking units: 3 flexo printing units  with hot air drying  Die-cutting units: 3 die-cutting units  New control system  Web edge control  Gymnastics bar  Unwinder Isdpov Dv Tvjfx Aabobc  Rewinders  Slitting unit Structure of machine Unwinding - web edge control - printing unit with hot-air drying - turning cross - printing unit with hot-air drying - printing unit with hot-air drying – die-cutting unit – die-cutting unit - grid rewind - die-cutting unit - slitting unit