Used Speedmaster 72 for sale (2,113)

Condition: excellent (used), functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, empty load weight: 10,850 kg, lifting power: 7,200 kg/m, lifting height: 10,000 mm, Year of construction: 2012, operating hours: 6,898 h, Equipment: additional headlights, all wheel drive, cabin, pallet forks, standard shovel, trailer coupling, Telehandler MERLO P 72.10 Year: 2012 According to meter: 6,898 operating hours Perkins engine with 75 kW Hydrostatic transmission with 2 speed ranges 7.2 tons lifting capacity 10 meters lifting height - incl. forks - incl. bucket - hydraulic quick coupler Gjdsynrtwopfx Ad Ujip - additional hydraulic circuit up to fork carriage - self-leveling - upper carriage side shift - all-wheel drive - 3 steering modes - joystick control - lighting system with indicators - immediately operational! - original paint! - well maintained! - incl. all documents! Sales price: €34,900 net Affordable delivery possible!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,299 h, load capacity: 4,000 kg, lifting height: 8,400 mm, free lift: 2,800 mm, load center: 600 mm, fuel type: gas, mast type: triplex, motor manufacturer: GM 3.0, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27x10-12, overall weight: 7,100 kg, empty load weight: 4,000 kg, total height: 3,780 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, Combilift is in very good condition. Gjdpfx Adsyudyve Uoip Only 7299 hours We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world.

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), General Data Machine weight 3000 kg Giodpfx Adox D N Ams Uep This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. Application Types Sawing

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), General Data Measurements width 3100 mm Measurements depth 1850 mm Measurements height 2600 mm Machine weight 2800 kg This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. Application Types Sawing Giodpfx Aex D H A Ded Ujp

Condition: excellent (used), Three-phase motor, electric motor -Engine: is unused -Power: 45 kW -Speed: 2945 rpm -Shaft: Ø 60 mm -Height of shaft axis: 200 mm Giedpfx Aecun Rnsd Usp -Design: B35 -Protection class: IP 23 -Dimensions: 780/550/H460 mm -Weight: 250 kg

Condition: used, maximum load weight: 2,217 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 350 mm, total width: 1,810 mm, total height: 930 mm, A46 GW260N0161390 High loader trailer manufacturer: Unsinn, Type: UH 3617-26-10, Gross vehicle weight 2,600 kg, overrun braked, 100 km/h, 10" aluminium rims, aluminium side wall... and much more. Product information: "Unsinn UH 3617-26-10", 100 km/h version, shock absorbers installed. Godpfxoyqdtbj Ad Ueip Chassis: Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics * Hollow section construction, welded and fully hot-dip galvanized Axles, braked model: AL-KO braking system Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Load securing: 8 foldable lashing recesses, recessed in the floor frame profile * 8 lashing rings under the loading surface * Vehicle not prepared Errors and intermediate sale reserved.

Condition: excellent (used), Container roller set, container rollers for moving standard containers, Haacon, 16 t load capacity – used: Price ex location: €7,500 (net) Manufacturer: Haacon Giedpfeyr Hgysx Ad Uep Type: 4336.16-231720 Year of manufacture: 2022 Serial number: 1074982-01-00-001-51 Component number: 215993 Load per set (4 units): 160 kN Load per unit: 60 kN Rolling speed: max. 6 km/h Container rollers for moving standard containers Steering bar for handling the roller when dismantled and for auxiliary steering with parking brake Roller set consisting of drawbar, four swivel castors, lockable in travel direction Rolling operation up to 6 km/h Original price: €9,907 Available: immediately Condition: as new – used only approx. 3 times Location: 79183 Waldkirch

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Gisdpfx Adeyb Tc Hs Usp Maximum sheet size: 720 × 520 mm. Output: up to 25–28 cycles per minute. Motor power: 2.2 kW. Weight: approx. 2000 kg No documentation available.

Condition: used, Two-side evaporator Goedhart Giedoyttc Dspfx Ad Usp -Type: FC38Dp 453-7-230 -Cooling capacity: 25 kW at DT8 -Fin spinning: 7 mm -Fans: 3 x 450 mmm -Dimensions: 2850 x 1050 x 470 mm -Place for electric defrost -Volume: 32 L -Weight: 260 kg -Refrigeration: Freon -Quantity in stock: 7 -Reference number: CH 596 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: excellent (used), functionality: fully functional, Professional rag cutting machine – Wolf Rag Cutter – regarded as the best machine of its kind available on the market. This is a reliable piece of American-made equipment (The Wolf Machine Co., Cincinnati, Ohio, USA), designed for fast, precise, and efficient cutting of materials into cleaning rags. 2 units available. Both machines are in perfect condition, fully operational, and ready to work in your facility. Ideal for companies involved in textile recycling, rag production, or sorting used clothing. Key Advantages Additional revenue stream: The Wolf Rag Cutter is essential for maximizing profits in the used clothing trade. It allows you to convert unsold garments into valuable industrial cleaning rags. Minimize losses: Instead of disposing of unsold stock, you can cut it and sell the rags to workshops, production facilities, automotive service centers, and other businesses, generating constant additional income. Top quality: A product from the renowned American brand WOLF, ensuring durability and reliability. High efficiency: Patented design and a powerful motor provide fast and clean cutting of large volumes of material, such as used clothing. Ease of use: Ergonomic design and a mobile wheeled base (as shown in photos) enable easy relocation of the machine within your warehouse or facility. The machine is powered by standard industrial voltage (230 V, 50 Hz), ensuring straightforward installation. Gijdpfxeytnfye Ad Uep An investment that pays off quickly thanks to the streamlined rag-cutting process!

Condition: used, machine/vehicle number: A-IC1181, Year of construction: 2019, operating hours: 5,072 h, load capacity: 2,000 kg, lifting height: 2,010 mm, construction height: 1,481 mm, enginetype: Electric, manufacturer: Jungheinrich Gsdpfew Uauiox Ad Ueip

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz Giodpfxjx Sc Ine Ad Ujp - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories Gsdpsx Hf A Rofx Ad Ujip - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Condition: used, total length: 3,400 mm, total width: 1,100 mm, total height: 1,400 mm, Empty weight: 4.000 kg Giedpsytghajfx Ad Uop - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 365 - Swing over bed [mm]: 725 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 1600 - Bed width [mm]: 500 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 1250 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3400mm x 1100mm x 1400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), operating hours: 2,372 h, functionality: fully functional, working width: 750 mm, area performance: 3,700 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, HAKO HAKOMATIC B90 TB750 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) 2372 hours of operation 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 750 Suction nozzle working width (mm): 1100 Theoretical capacity (m²/h): 3700 Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW GEL BATTERIES 6V 175Ah SIAP (4x) NEW 380mm PPL 0.5 disc brushes (2x) NEW suction hose Gisdpfx Ajytcxzod Usp NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal solution - FREE KEY FEATURES: The 85-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (750mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: excellent (used), Binder Type: MKFT 720 E3.2 Temperature and Climate Test Chamber, Air-Cooled Temperature range: -70°C to +180°C Humidity range: 10% RH to 98% RH The MKFT climate chamber is a specially designed environmental simulation cabinet for industrial materials testing and environmental simulation. It offers exceptional performance that far exceeds the capabilities of a standard heating chamber, meeting all requirements for materials testing, as well as aging and stress tests. Technical data: External dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Internal volume: 734 liters Net weight (empty): 635 kg Maximum total load: 160 kg Maximum load per shelf: 40 kg Temperature performance: Temperature range: -70°C to 180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.3...2.0 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.0 K/min Max. heat compensation: 5000 W Climate performance: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation depending on setpoint: 0.1...1.0 ± K Max. heat compensation: 800 W Electrical data: Rated voltage: 400V 3N~ ±10% 50Hz Rated power: 13 kW 22.2 A Refrigerants: R-404A / R-23 Important information for you as the buyer: The following services are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant Gisdoyr Hi Uepfx Ad Usp 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (See photo) (Specifications and technical details subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: like new (used), Steinmeyer Ball Screw 3526.512/25.40.728.1122 P5P Manufacturer: August Steinmeyer GmbH & Co. KG Component: Ball screw / ball screw shaft Gisdeyr Ab Tspfx Ad Uep Type: 3526.512/25.40.728.1122 P5P Precision class: P5P Design: Ball screw shaft with nut Condition: New, in original packaging Packaging: Wooden crate with protective packaging Application: Precise linear movements in machine tools, automation systems, and CNC equipment Location: Altenglan

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, clamping force: 3,200 kN, screw diameter: 60 mm, injection weight: 723 g, total height: 2,400 mm, overall weight: 17,700 kg, This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Additional equipment • The Wittmann robot is not included • Conveyor belt is included, protective housing only for the electrical components Giodpfx Adjx D N Sbo Uep • No other peripherals are included. Machine Benefits Qualitative Machine Benefits • Condition: used, pump overhauled Technical Machine Benefits • Known defects: water computer and water batteries should be overhauled (no influence on function) • Machine without handling system and peripherals Extra Information Machine still under power Dimensions Machine Depth 7200 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 53,875 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: MATSUURA, controller model: G-Tech 30i, number of slots in tool magazine: 240, number of axes: 5, This 5-axis Matsuura MAM72-25v was manufactured in 2004. It features X-travel of 550mm, Y-travel of 410mm, and Z-travel of 450mm. The spindle operates up to 12,000rpm with a BT40 taper and has a tool storage capacity of 240 pieces. Consider the opportunity to buy this Matsuura MAM72-25v universal machining centre. Contact us for more information about this machine. • B-axis travel: -110° to +110° • C-axis travel: 360° • Pallet working surface: 130 mm diameter • Max. workpiece size: 250 mm diameter x 250 mm height • After maintenance on the spindle the machine is limited to 12,000 rpm Additional equipment • BMO Titanium 50 robot cell (YOM 2016), available for an additional €30,000 • Includes: 1 zero-point clamping system and 1 long clamp Technical Specification Taper Size BT 40 Gijdpfxoyf Hphs Ad Usp

Condition: ready for operation (used), Year of construction: 2021, operating hours: 66,828 h, laser power: 2,500 W, This ADIGE LASERTUBE LT722D was manufactured in 2021. It's designed for laser processing of tubes, handling materials like mild steel and stainless steel. It supports various tube shapes, including round, square, and rectangular, with dimensions up to 140 mm. Features include a PRECITEC AK-HP cutting head, automatic tube bundle loader, and a robust unloading system. Ideal for high-quality laser cutting operations. Contact us for more information about this machine. • Semi-sealed, diffusion-cooled co2 laser source rofin dc 025 compact. Rated power: 2500 w. • Main module of the automatic unloading system with 1-cnc-axis controlled support for the tube to be machined • Program-controlled unloading • Extension module of the automatic unloading system for part lengths up to 4500 mm • Sorting of good parts to front (desk side) and rear (loader side) • Sorting of cut pieces and offcuts into a cassette • Suitable for processing open profiles (flat, l, c, and u-profiles) • Specific mechanical devices and process modifications for open profiles Gjdpfxox D Nnis Ad Usip • Suitable for processing tubes made of mild steel or stainless steel • Round tube dimensions: Ø 12–140 mm • Square tube dimensions: 12 x 12 mm to 120 x 120 mm • Rectangular/flat-oval tube dimensions: side 10 mm up to max 140 mm • Maximum side difference for rectangular/flat-oval tubes: 110 mm • Workpiece envelope: inscribed in a Ø 170 mm circle • Maximum tube weight: 15 kg/m; 100 kg total maximum • Equipment and Unloading Device Features • Equipment for a 6.5 m bundle loader for tubes/pipes with sensitive surfaces: Rubber cladding of the chains for material feed. Plastic cladding of the tube/pipe loading and holding parts up to separation. • Main module of the automatic Unloading Device, with: 1-CNC-axis controlled support for the tube/pipe to be processed. Program-controlled unloading. • Extension module of the automatic Unloading Device for partial lengths up to 4,500 mm, with: Sorting of the good parts: To the front (console side), from 250 mm to 4,500 mm. To the rear (loader side) up to 4,000 mm. Sorting of crop ends and remnants in lengths under 250 mm into a e/Pipe Specifications • Round Tubes: Diameter $\text{12 mm}$ up to $\text{140 mm}$. • Square Tubes: $\text{12 x 12 mm}$ up to $\text{120 x 120 mm}$. • Rectangular/Flat Oval Tubes: $\text{10 mm}$ side up to max. $\text{140 mm}$ side. Maximum side difference: $\text{110 mm}$. Must be inscribable in a $\text{170 mm}$ diameter circle. • Maximum Tube/Pipe Weight: $\text{15 kg/m}$ (100 kg maximal total). Additional equipment • PRECITEC AK-HP universal cutting head holder for non-contact distance control • Capacitive distance sensor with reinforced ceramic part • Pressure resistance up to 25 bar • Mixed cooling (water and dry air) for the lens holder/upper lens area • Dry-air cooling of the ceramic part and nozzle • Automatic tube bundle loader for initial lengths between 3200 and 6500 mm • Loading with an overhead crane possible • Special lift loader equipment for square, rectangular, and flat-oval tubes • Tube separation with length measuring station • Equipment for a 6500 mm bundle loader for pipes with sensitive surfaces • Artube nesting software included

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Gisdex D Hntspfx Ad Uep Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,911 h, controller manufacturer: FANUC, controller model: 30 iM, total height: 2,250 mm, spindle speed (max.): 15,000 rpm, This 5-axis Matsuura MAM72-25V was manufactured in 2006. Ideal for complex and precise machining tasks, this vertical machining center offers enhanced flexibility and productivity for your manufacturing needs. Consider the opportunity to buy this Matsuura MAM72-25V vertical machining center. Contact us for more information. Additional equipment • Tool changer with 40 stations (chain) • Pallet changer for 2 pallets, 130 mm diameter • Replacement pallets Capto C6 • KNOLL coolant system with coolant supply through the spindle and pump KTS25-50T / Coolant shower with a capacity of 100 l/min at 1.4 bar • 2 spiral chip conveyors • Renishaw measuring probe OMP60 / Renishaw laser system TRS-1 Gedpsx D Shrefx Ad Usip • Rotating viewing window, electric / For the control: programmable mirror, coordinate system rotation, IZ2/150NF HSC precision control for simultaneous 5-axis machining • CE mark Machine Benefits Technical Machine Benefits • Direct position measuring system via rotary encoder for b and c axes • Spindle and spindle motor were last replaced in 2018 Dimensions Machine Depth 2200 mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 380 mm, number of axes: 5, This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. • 5-axis fork head (replaced in 2019) • Rear spindle with Flex5 unit • 2 traveling plate changers, 18 slots each • Second vacuum pump, switchable individually Additional equipment Gsdjx D Hxfjpfx Ad Usip • Computer with Windows 10 (new ~1.5 years ago) • WoodWOP 8.1 software

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Gsdpfxeyli Efj Ad Ueip Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Giodpoyli D Ijfx Ad Uop Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request