Used Spreader for sale (554)

Condition: repair required (used), Year of construction: 2025, functionality: limited functionality, machine/vehicle number: 24163 / 24191, Bakery Machines For sale as: used and partially damaged/contaminated – no warranty, no guarantees, sold as is, “as is, where is” Depositor + accessories & topping applicator + cleaning cart Hsdpfx Ao Afmqhoirow Manufacturer: bmTEC Machine specifications: see downloadable PDF Condition: used/damaged, in operation from early 2025 to early 2026 Damage to the “Depositor”: Only the “Depositor” is mechanically damaged. During loading, the “Depositor” tipped over to the side and fell to the floor. The frame of the “Depositor” is bent. The gap dimensions vary considerably. Inside, residues from rodents and dirt are visible due to storage. In the area of the product inlet, a compression of the frame can be seen. One of the conveyor belts shows no tension. Inside one of the installed control cabinets, a plastic cover and a screw are lying loose. The “Topping Applicator”, which is controlled via the “Depositor” and the control cabinet installed there, shows no visible defects other than the usual signs of wear. However, soiling is also visible here. No visible irregularities can be seen on the sheets belonging to the machine and on the cleaning cart. Sales basis: loaded onto a truck at the location 83562 Rechtmehring

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 201269, total width: 1,150 mm, total height: 1,650 mm, total length: 900 mm, working width: 700 mm, input voltage: 230 V, type of input current: three-phase, overall weight: 170 kg, power: 0.75 kW (1.02 HP), passage height: 100 mm, height adjustment type: mechanical, working height: 850 mm, roll width: 700 mm, input frequency: 50 Hz, input current: 16 A, Equipment: CE marking, The used roller coating machine for adhesive is designed for applying adhesives such as glue to various surfaces, including veneer, aluminum veneer, and other materials used in the furniture, parquet, and woodworking industries. The machine is also suitable for materials such as plastic, cardboard, textiles, wood, and more. The adhesive roller coating machine uses an adjustable adhesive reservoir for even and precise adhesive distribution. The speed of the adhesive roller and the transport roller can be adjusted using a frequency controller. The machine can operate at speeds ranging from 5 to 50 m/min. The feed height can also be adjusted using a handwheel. Hedpfx Aio Aayrnorow The machine is fully functional and has been inspected in our workshop.

Condition: used, total length: 1,000 mm, total width: 400 mm, total height: 1,100 mm, Year of manufacture: 2020 Colour: White Empty weight: 100 kg - Year: 2020 - CE marking present: Yes - Serial number: 200120 - Max. working width [mm]: 450 - Max. work thickness [mm]: 30 - Voltage [V]: 240 - Fuse [A]: 16 - Power [kW]: 0.3 - Transport dimensions: 1000mm x 400mm x 1100mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Hjdpfxo Aaydds Airow

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Hsdpfez A D Rysx Airsw Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE MODEL HOTMASTER, GLUE MELTER AND ROLLER PRESS The line includes: 1 feeding conveyor with a COSMA cleaning brush Hsdpfx Aioz Ng Agorjw 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLYING MACHINE 1 OSAMA central conveyor 1 press (6 pressing rollers, 3+3) 1 COSMA discharge conveyor Metering and application rollers with resistors/oil heating system of 8 kW x 2 - No. 03 motors at the end of the application and metering rollers, independently controlled - Adjustable speed via no. 03 electric frequency regulators with an automatic "reverse" rotation system for the rollers to clean the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display - Top applicator 3 kW + bottom applicator 3 kW + top metering device 0.75 kW - Part movement control 0.55 kW - Lifting torque of the top rollers 0.18 kW - No. 02 motorized steel rollers at the machine inlet - No. 02 motorized steel rollers at the machine outlet - Stainless steel tray for machine cleaning - The machine is programmable to heat the rollers automatically without any control or operator intervention - Machine ready for the application of glue guns for the application of PUR glue, without glue guns - Machine ready for integration into a production line * No. 01 tube for PUR glue fume extraction, 145 mm diameter. HIGH-TECH AUTOMATIC 6-ROLLER PRESS MODEL CLR/6-1300 STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: - Inverter speed variator motor - Independent pressure adjustment system for each pair of rollers, with a shared pressure sensor display between the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure No. 02 + 02 (four) rubber pressing rollers, Shore hardness 90 +- 5 Shore No. 02 (two) rollers positioned in the middle, made of chrome steel Roller diameter: 300 mm Useful working width: 1300 mm Minimum/maximum working height: 0-100 mm Video available upon request.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Adjustable glue application rate Hedpfx Aijzxpvvjrjw Single-sided glue application Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg 380 V Year: 2003

Condition: refurbished (used), functionality: fully functional, Valentini adhesive applicator Manual roller adjustment Hodpfx Aie Af Agxorew

Condition: excellent (used), power: 58 kW (78.86 HP), operation weight: 12,000 kg, Year of construction: 2006, operating hours: 4,870 h, BOMAG BW174 AD with BS180 spreader Asphalt Manager Year 2006 Operation hours: 4.870 hrs. Drum width : 1.68m Hodps Afhi Sjfx Airsw Cummins engine with 58 kW CE / EPA Operation weight: 12 to

Condition: like new (used), functionality: fully functional, Working width: 300mm Manual adjustment of roller spacing Hedpjz E U E Hofx Airew Two glue application speed settings Safety switch Mobile design

Condition: excellent (used), functionality: fully functional, AUTOMATIC GLUE SPREADER with 2 rollers model OMMA FT 1300 second hand machine Hjdpjz R Dwdsfx Airow n.02 rubber rollers CE mark : Yes max. working length mm. 1300 volt. 380/50

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW Hodpfx Aiszxz H Hjrow

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU21C0001, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, input current: 40 A, Brand new , never used Versa PUR Tank Melter for PUR glue application. This aggregate is stil in its original packing . Hodpfx Ajz Sqppeirsw The aggregate comes from close down of a factory here in Norway. Ready to be send . Please contact me for more information.

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Manual adjustment of roller spacing Hjdpfjz Agvhox Airsw Simultaneous application of adhesive to the top and bottom surfaces

Condition: ready for operation (used), functionality: fully functional, Working width: 1300 mm Manual adjustment of roller spacing Cleaning brush Hjdoz E Rlpspfx Airow Safety switch Mobile design

Condition: used, STREUMASTER SW3 FC 3 Cubic Meter Lime Spreader Soil Stabilizer Container: • Year of manufacture: 2017 • 3 m³ container volume • Filling connection: 3" / 3" Hodpowv H Nqsfx Airew Spreading mechanism: • Working width: 2,460 mm • Partial widths: 3 x 820 mm • Spreading rate at 1 km/h: 1-50 kg/m² (with a binder density of 1 kg/liter) Weight and dimensions: • Tare weight: 1,250 kg • Dimensions: 1,600 x 2,550 x 1,990 mm Tractor requirements: • Three-point linkage: Category 2 DIN / ISO 730 - 1 • Required hydraulic output: 50 liters/min at 180 bar • Max. permissible hydraulic flow rate: 75 liters/min • Electrical system: 12 V - Loading capability available! - Only 1 owner! - German machine! - Ready for use! Errors and prior sale excepted! = Further information = Year of manufacture: 2017 Design year: 2017 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Hsdpfszxr Uhex Airsw Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Mobile version with 2 rollers on the rear machine frame Connection data: 400 V, 50 Hz, 3-phase, N

Condition: used, Year of construction: 2004, Control unit, factory reconditioned used cleaned functionally tested partially overhauled Manufacturer: Ganner Type: 252/N Hjdpjz I D Aajfx Airow Year of manufacture: 2004 Machine no.: 756 484 CE type-tested Adhesive container capacity: 5 liters Dowel diameter: 8 mm Dowel length: 30 mm With adhesive supply Water flushing Glue gun mobile Space requirement approx. L x W x H mm: 600x600x1200 Weight approx. kg: 100 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without guarantee and warranty

Condition: new, color: yellow, Spreader for salt and green manure, among other things. Infinitely variable speed setting of the sowing shaft and an adjustable bottom flap 12 volt - electric operation 5 outlets - 5 spreading funnels Multifunctional construction and usage options. Turbo 5 is on the right in the photo, with the 5 outlets. Condition: New Hedj Af Tgdjpfx Airjw

Condition: good (used), Year of construction: 2014, operating hours: 11,923 h, load capacity: 1,700 kg, lifting height: 7,700 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, empty load weight: 3,000 kg, mileage: 11,923 km, - This TRIPLEX reach truck, manufactured by STILL, dates from 2014 and is in good condition; - The forklift has a lifting capacity of 1,700 kg; - It can lift to a height of 7,700 mm; - The overall height is 3,100 mm; - The reach truck is equipped with a FREELIFT and a SIDESHIFT; - It also features a FORK SPREADER! - The 2016 battery comes with an external charger and an automatic filling system. Hodpfx As Agu Agoirjw - Watch the video on YouTube.

Condition: ready for operation (used), working width: 2,000 mm, roller diameter: 350 mm, Glue spreader for plywood manufacturing. Hjdpfozazftox Airjw Width or length of the glue rollers: 2000 mm Diameter of rollers: 350 mm Rollers are covered with some Polyurethane material. The unit is frequency controlled for the feeding speed.

Condition: used, New: Yes Colour: Grey Hodpez S Dlqefx Airew

Condition: used, Year of construction: 2014, functionality: fully functional, Roller Glue Spreader OSAMA SBR 250 Hodpfx Aiez H H Ivorow Working width: 230 mm Working height: 0 – 100 mm Applicator roller diameter: Ø 150 mm Feed speed: 28 m/min Motor power: 0.18 kW CE marking

Condition: excellent (used), Year of construction: 2015, Adhesive application machine, HH Maschinenbau Hedpfx Aijz I Rcgorsw Type TH 300 Year of manufacture: 2015

Condition: used, operating hours: 13,853 h, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, power: 55 kW (74.78 HP), General information Year of manufacture: 2017 Year of construction: 2017 Weights Empty weight: 8.470 kg Functional Lifting capacity: 4.500 kg Number of valves: 3 CE mark: yes Hodpfoz I A Sysx Airew Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Make of engine: Kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Technical specifications: Manufacturer: Karl Tränklein GmbH Model: ZW 500 Year of manufacture: 1990 Hsdpfoz Sm Uwjx Airew Serial number: 8083 Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.