Used Superprofi Er 08 for sale (34,913)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, We offer for sale 2 units of MIWE roll-in e+ 6.08 rotary gas ovens (Model 2011). The ovens are in very good condition, fully functional, and have only been used 2 days a week. They are truly in excellent condition. The price for one oven is €12,000 net. In the case of purchasing both units, the price is negotiable. Baking trays and trolley systems are not included in the price. 30 trolley systems with baking trays are available. Rjdo Aghxwepfx Airoch Technical specifications of the equipment (applicable to 1 unit): • Baking tray dimensions: 60 x 80 cm (600 x 800 mm) • Baking area capacity: 8.6 to 9.6 m² (depending on the number of trolley levels, 18–20) • External dimensions of the frame: 155 x 160 x 256 cm (Width x Depth x Height) • Minimum clear ceiling height: 285 cm (for exhaust, condensation, and service access) • Weight of the empty oven: approx. 1,350 kg • Heating medium: Natural gas (type H / G20), operating pressure 20 mbar • Heating power of the burner: 60 – 75 kW • Electrical connection: 3N~ 400 V / 50 Hz, power consumption of electronics and motors approx. 2.6 kW • Recommended fuse rating: 16 A • Water and drain connection: Water supply R 3/4" (cold, softened, 2-6 bar), temperature-resistant drain DN 50

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 359 g, mold height (min.): 250 mm, plate length: 695 mm, plate width: 695 mm, total length: 5,205 mm, total width: 1,670 mm, total height: 2,200 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Rcsdpfjz Iz Exex Aireh Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Frequency converter Hidrive drive 4 x pneumatic valve

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Rcsdpfx Ajyxn Tvjirjh

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Rcjdpfx Ae Adtqloirjh

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Rcedovby U Sepfx Airsh Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Redpfx Aijz Ipwpjrjch Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2016, Machine No. 14, Serial No. 238835, Arburg Selogica control system, clamping force 2,500 kN, screw diameter 45 mm, handling system, manufacturer Arburg, type Multilift Select, year of manufacture 2016, travel distances X/Y/Z 700 x 1,200 x 2,400 mm, safety enclosure, handling robot, manufacturer Kuka, type KR10R1100, year of manufacture 2016, serial no. FA2686, 2 conveyor belts, manufacturer Schuma, L/W approx. 2,000 x 800 mm. Rcjdpfx Aoz H N H Isireh

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN Redpsz D Ttgofx Airech INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: good (used), Year of construction: 1980, functionality: fully functional, lateral stop: 1,420 mm, cutting width (max.): 1,420 mm, Bobst SP 142 ER from 1980 for sale – reason for sale: a replacement investment has been made. The machine can be inspected during operation. Dismantling and transport are the responsibility of the buyer. Rcods Afbxmjpfx Airjh

Condition: used, Year of construction: 1998, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Redpfx Aisz D U Rmsrech Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Rcjdez D Uv Nepfx Airsh Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A) Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: used, Year of construction: 2008, overall weight: 190 kg, hopper volume: 7 l, terms of delivery: FCA Pegnitz Rjdpoz N Igmjfx Airoch delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 530 mm z-travel 510 mm Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 Rcsdex R Emqspfx Airoh power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -413

Condition: excellent (used), Hallo, Rcjdpfxoiqunwe Airjh Wir bieten hier kurzen Erowa Kontrolldorn kurz an. ER-008617. Mit diesem lässt sich der Rundlauf und die Achse ausrichten.Passend für Spannfutter 50 +100. Bei Rückfragen stehen wir gerne zur Verfügung .

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Redpfx Aez D U D Tsirech Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 530 mm z-travel 510 mm Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -038 Rcodpfxox R Emwo Aireh

Year of construction: 2008, operating hours: 133 h, condition: used, JBM Wood Chipper, Model 630 MDX, mounted on a single-axle chassis / car trailer > Kubota diesel engine, 44 kW (60 hp) > Spring-suspended, braked single-axle chassis > Wide feed opening: 310 x 220 mm > Log diameter up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight: approx. 1,690 kg > Only 133 operating hours! > Year of manufacture: 2008 Rsdpfxozyf Hto Airech Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! = Further information = Year of manufacture: 2008 Operating hours: 133 Please contact Tobias Ebert for further information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2016, total width: 2,510 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,880 mm, color: blue, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - EBS (Electronic Braking System) = Further information = Axle configuration Tyre size: 385/65R22.5 Axle make: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,750 kg Payload: 33,250 kg Redpfx Aoz Hklljirjch Gross vehicle weight (GVW): 39,000 kg Identification Registration number: OP-52-HT

Condition: used, wirehood applicator Rcodpsz Sdnysfx Airjh

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Rsdpfxsz D Uyue Airoch Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2001, gearing type: other, first registration: 01/2001, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Available in quantities of 2! 8-ton front axle, curved, disc brakes, EBS. From a MAN TGA 18.360 4x2, wheelbase 3600mm. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Rcjdpfxji Rpi To Airsh

Year of construction: 2008, condition: used, New: No Year of construction: 2008 VAT/margin: VAT qualifying Rcjdpfoy Alt Usx Aireh

Condition: used, Year of construction: 2015, operating hours: 1,578 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 1,860 mm, gearing type: automatic, overall weight: 679 kg, empty load weight: 495 kg, total length: 1,777 mm, color: red, mileage: 1,578 km, first registration: 09/2015, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The BT SWE 080L stands out as an exceptionally efficient and cost-effective solution for modern warehouse operations. This model combines a compact design with reliable performance, thereby creating ideal conditions for structured, fast, and safe workflows. Thanks to its electric drive, the stacker operates quietly and emission-free, making it an excellent choice for use in indoor facilities and sensitive work environments. Rsdpfxjyivmke Airoch The automatic functions allow for particularly comfortable and intuitive operation, enabling the stacker to be seamlessly integrated into existing processes. Operators benefit from a pleasant driving experience, which noticeably eases daily work while simultaneously increasing efficiency. With a lift height of 1,580 mm, goods can be stored and retrieved on various levels with ease, allowing you to maximize your existing storage capacity. Thanks to its narrow design, with only 726 mm width, the stacker remains highly maneuverable even in confined aisles. The robust construction ensures safe handling and highlights the durability of this proven model. Particularly noteworthy are the mere 1,578 operating hours, indicating relatively low usage and signifying a long remaining service life. First registered in September 2015, this machine features mature technology that has proven itself many times in practical use. This stacker is a sound investment for businesses that value reliability, low operating costs, and sustainable internal process optimization. With the BT SWE 080L, you secure a powerful work tool that efficiently supports your operations and creates long-term value. Sale only to commercial customers (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Rcjdpfx Aoznucyoirsh Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 131 644, total height: 3,550 mm, total width: 2,000 mm, total length: 3,400 mm, type of input current: three-phase, input voltage: 400 V, distance between side stands: 400 mm, distance between stands: 1,080 mm, overall weight: 14,000 kg, control voltage: 24 V, year of last overhaul: 2026, Attention: machine has been 2022 completely mechanically and electrically retrofitted before delivery press force: 1000kN stroke: 30 - 100mm slide adjustment: 80mm speed: 50 - 300/min shut height. 350mm table dimensions: 1080 x 800mm slide dimensions: 900 x 620mm new electrical controller SIEMENS S7 1500 Rcsdpfx Aofn Affjirsh