Used Tornos Multideco for sale (129)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 35,324 h, spindle motor power: 11,000 W, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, number of axes: 10, This 10-axis Tornos-Bechler MultiDeco 20-6 was manufactured in 2001. It features a maximum bar diameter of 20 mm, spindle speeds up to 8,000 rpm, and a main spindle motor power of approximately 11-15 kW. It includes multiple front and rear tool stations and an optional chip conveyor. If you are looking to get high-quality turning capabilities, consider the Tornos-Bechler MultiDeco 26-6 machine we have for sale. Contact us for more information about this machine. Additional equipment • Cooling System: Oil or emulsion • Chip Conveyor: Optional Machine Benefits Technical Machine Benefits Bodpfxjyairne Afhelc • Tool stations: multiple front and rear tool stations (modular) Extra Information Max. Bar Diameter: 20 mm Max. Part Length: Approx. 100–120 mm (per clamping) Back-Working Unit: Yes (3-axis configuration)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 64,409 h, spindle motor power: 18,000 W, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, number of axes: 10, This 10-axis Tornos-Bechler MultiDeco 26-6 was manufactured in 2000, featuring a max bar diameter of 26 mm and part length up to 120 mm per clamping. It operates with spindle speeds up to 8,000 rpm and a main spindle drive power of 18 kW. Consider the opportunity to buy this Tornos-Bechler MultiDeco 26-6 swiss type turning machine. Contact us for more information about this machine. Additional equipment • Back-working Capabilities: Yes Machine Benefits Technical Machine Benefits • Max. Bar diameter: 26 mm • Max. Part length: approximately 120 mm (per clamping) Bsdpfx Afeyairhjhelc Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1997, operating hours: 54,044 h, spindle motor power: 15,000 W, spindle speed (max.): 3,500 rpm, controller manufacturer: FANUC, This TORNOS MultiDeco 20-8b was manufactured in 1997. It features 8 main spindles and a counter-spindle, supporting a maximum bar diameter of 20 mm. Main spindle speeds reach up to 3,500 rpm, with spindle power ranging from 15 to 18.5 kW. If you are looking to get high quality turning capabilities consider the TORNOS MultiDeco 20-8b machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Bledpfx Asyairbefhsc • Maximum bar diameter: 20 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,374 h, Control Unit Brand FANUC Main Drive Number of spindles 6 Spindle speed range 400–5000 Number of axis 18 Turret Number of turrets 1 This TORNOS MultiDeco 32-6i was manufactured in 2003. It features a maximum bar diameter of 32 mm, max hex bar capacity of 28 mm, and main spindle speed ranging from 400 to 5,000 rpm. With 6 spindles for simultaneous machining and 5 cross slides, consider the opportunity to buy this TORNOS MultiDeco 32-6i swiss type turning machine. Contact us for more information. Application Types Bledex D N Snepfx Afhjc Turning

Condition: good (used), Year of construction: 1999, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T-61796, year of manufacture 1999, FANUC control, chip conveyor, bar loader IEMCA Sir 32F, No. 98072003, year of manufacture 1998 Blodsunvwljpfx Afhoc

Condition: used, TECHNICAL DETAILS - bar clearance : 5-20 [mm] - maxi part length (without counter operation) : 100 [mm] - maxi part length (with counter operation) : 80 [mm] - spindle rotation speed : 5 000 [rpm] - spindles maxi power : 15 [kW] - drilling/tapping maxi power : 3.7 [kW] - number of numerical axes : 23 - number of cross slides : 8 - counter operation slide : 1 - end units : 7 - number of sub-spindle : 1 - sub-spindle motor power : 1.1 [kW] - dimensions : 5880 x 1400 x 1950 [mm] - weight : 7 200 [kg] EQUIPMENT - TORNOS PNC DECO control - HIRTH teeth drum locking - high pressure pump - chips conveyor - turning tools-holders - IEMCA PRA 40/33F bar feeder Bsdjuhaq Uspfx Afhjlc - number of hours 31600

Condition: used, TECHNICAL DETAILS - Number of axes : 17 - Max. bar diameter : 25.4 [mm] - Spindle speeds : 5000 [rpm] - Spindle power : 18 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3500 X 1600 [mm] - Machine height : 1950 [mm] - Machine weight : 8500 [kg] MACHINE HOURS - Number of hours under power : 33026 [h] Bljdpfx Afowuu Rgshoc EQUIPMENT - CNC : TORNOS TB DECO - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Cooling unit - Bar loader : TORNOS Robobar MSF 522

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Counter-spindle with brake - Retractable stop Spindle stop - Chips conveyor - Coolant tank Bjdowuu R Hopfx Afhjlc * with high-pressure pump * with paper filtering unit - Cooling unit - Bar loader : IEMCA PRA 52F / 33

Condition: used, Cnc multispindle lathe TORNOS MULTIDECO 26/6 Bledpfjuhaqhjx Afhsc

Condition: used, TECHNICAL DETAILS - Minimum/maximum bar diameter : 8-25.4 [mm] - Maximum workpiece length : 120 [mm] - Spindle speed : 5,000 [rpm] - Spindle power : 18 [kW] - Number of digital axes : 17 - Barrel locking with Hirth teeth - Dimensions : 3500 x 1600 x 1950 [mm] - Weight : 8,500 [kg] MACHINE HOURS - Powered hours : 63,341 [h] EQUIPMENT - TORNOS TB DECO CNC - Spindle stop - Counterspindle with counter-operation device - Single end milling machine - Polygon milling machine - Central block drilling machine Bodpfx Ajuharfofhjlc - Pick-up machine - Turning tool holders - Bar feeder: IEMCA SIR 25 P - KNOLL lubrication tank - Chip conveyor - Cutting oil air conditioning

Condition: used, TECHNICAL DETAILS - Min/max bar diameter : 8-25.4 [mm] - Max. part length : 120 [mm] - Spindle rotation speed : 5000 [Rpm] - Spindle power : 18 [kW] - Number of numerical axes : 17 - Drum lock through Hirth denture - Dimensions : 3500 x 1600 x 1950 [mm] Bljdpfx Asuharxjfhsc - Weight : 8500 [kg] - Number of working hours : 66.850 [h] EQUIPMENT - CNC : TORNOS FANUC PNC DECO - Lubrication tank: KNOLL * with high pressure pump - Bar loader : TORNOS ROBOBAR MSF-522 - Chip conveyor - Cooling unit: HYFRA

Condition: used, TECHNICAL DETAILS - Number of axes : 17 - Max. bar diameter : 25.4 [mm] - Spindle speeds : 5000 [rpm] - Spindle power : 18 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3500 X 1600 [mm] - Machine height : 1950 [mm] - Machine weight : 8500 [kg] MACHINE HOURS - Number of hours under power : 62132 [h] EQUIPMENT - CNC : TORNOS TB DECO - Chips conveyor : MAYFRAN P51-02 M313001 - Coolant tank * with high-pressure pump : MAYFRAN 80 [bars] - Cooling unit - Bar loader : TORNOS Robobar MSF 522 - Oil mist extractor : ELBARON - Fire extinguisher * : BAUER KRAFT Bodpfx Aewuu N Njfhslc

Condition: used, TECHNICAL DETAILS - Number of axes : 18 - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speeds : 400-5000 [rpm] COUNTER-SPINDLE WEIGHT & DIMENSIONS Bledpjwuu Rmefx Afhec - Machine floor space : 8300 x 2300 [mm] - Machine height : 2240 [mm] - Machine weight : 11500 [kg] EQUIPMENT - CNC : Fanuc PNC Deco - Chips conveyor : Mayfran - Coolant tank * with high-pressure pump - Bar loader : TORNOS MSF 832/6

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Counter-spindle with brake - Retractable stop Spindle stop - Chips conveyor - Coolant tank Bledpfswuu Ryex Afhsc * with high-pressure pump * with paper filtering unit - Bar loader : IEMCA PRA 52F / 33

Condition: used, TECHNICAL DETAILS - number of axes : 18 - number of spindles : 6 - max round bar diameter : 32 [mm] - max clearance in hexagonal bar : 28 [mm] - spindle speed : 400 - 5 000 [rpm] - capacity of the sub-spindle : 32 [mm] - number of the cross slides : 5 - strokes of the cross slides in position 2 and 3, X x Z : 60 x 80 [mm] - strokes of the cross slides in position 1, 4 and 5 , X x Z : 60 x 100 [mm] - size : 8 300 x 2 300 x 2 240 [mm] - weight : 11 500 [kg] - number of working hours : 52066 [h] EQUIPMENT - numerical control TORNOS PNC DECO - spindle stop pos 4 - numerical sub-spindle with counter operation device - parts catcher with conveying strip Blodjuhaquepfx Afhec - 5 turning tool-holders GOLTENBODT with collar - 1 cutting-off tool-holder GOLTENBODT - 4 fixed drillers - 1 driven driller - chips conveyor - high pressure pump - integrated bar feeder TORNOS MSF 832/6 - lamp

Condition: ready for operation (used), Year of construction: 1999, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" Bodpfx Afex D D Ikshjlc • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 12,000 rpm, This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a "HYBRIDE 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine. Bedex D Dmyopfx Afhjlc Additional information • Electrical control box • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Pivoting workpiece holder on the counter spindle • Directional spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Independent counter spindle • Tapping attachment for collet chuck ESX 12 • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mmOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine Blsdsx D Dliopfx Afhjc • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine • 10+5" HYBRID drum • Integrated hydraulic unit • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): Bodpfox D Dm Tex Afhjlc • 1–4 mm diameter bars • 4 mm diameter bars • 8 mm diameter bars Additional equipment • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2007, This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information. Bjdpfx Afsx D Dmmohelc Additional information • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • 3 pre-settable turning tool holders • Motorization S2 • Tapping attachment for collet chuck ESX 12 • 4 fixed tool holders • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Lathe capacity 10 mmOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2010, This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine. Additional information • Electrical control box • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Movable headstock Bljdex D Dndjpfx Afhoc • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12000 rpmOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2010, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information. Additional information • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Movable headstock • Directional spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Tapping attachment for collet chuck ESX 12 • Loading magazine with drum Bjdpfx Afex D Dmtoholc • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 VOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2006, operating hours: 28,791 h, This TORNOS DECO 20A was manufactured in 2006. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can accommodate up to 21 fixed and 15 rotating tools. It includes an IEMCA BOSS 332 E/R loader and a CONVEYORS IND. ASS. TMTPF 2294 conveyor, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 20A Swiss type turning machine. Contact us for more information about this machine. Additional equipment • Loader • Conveyor • Automatic Fire Extinguishing System Machine Benefits Technical Machine Benefits Blodeyan Iujpfx Afhec • Maximum fixed/rotating tools: 21/15 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2000, operating hours: 33,594 h, This TORNOS DECO 2000/13 was manufactured in 2000. A robust Swiss type turning machine with a bar passage of 16 mm and maximum spindle power of 9.7 kWh. It includes an IEMCA GENIUS 226/32 loader and a CONVEYORS IND. ASS. TMTPF 1440 conveyor. Equipped with an automatic fire extinguishing system from Kraft & Bauer. Consider the opportunity to buy this TORNOS DECO 2000/13 Swiss type turning machine. Contact us for more information. Additional equipment • Loader • Conveyor • Automatic Fire Extinguishing System Machine Benefits Technical Machine Benefits • Maximum fixed/rotating tools: 20/16 • Bar passage: 16 mm Bedpfxjyan Ibs Afholc • High spindle speed capability Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model Series Oi-TD Main Drive Blodpfx Afjx Sz A Dshsc Number of axis 5 Spindle Speed 10000 RPM Spindle motor power 3.7 kW This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine. Application Types Turning