Used Vacuum Pumps for sale (10,779)

Condition: used, Vacuum pump, vane cell pump, rotary vane pump WERIE RIETSCHLE Model CLFTL 25 DV Device No.: 481579 Delivery rate: 25 m3/h Vacuum: -0.6 bar (test run: -0.66 bar) Vacuum level: 60% Motor speed: 1,400 rpm Motor power: 1.4 kW Power supply: 220 Volt, 50 Hz - Dry-running pump without oil lubrication - Threaded connection for suction and pressure line: 1/2" Dimensions (L x W x H): 600 x 360 x 270 mm Weight: 50 kg Good condition Kdodjxciwnopfx Af Hjt

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Kdodpfxjzz Tm Ro Af Hot Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2020, overall weight: 224 kg, Vacuum pump / vacuum system Volume flow rate: 280 m3/h Kdedexcb Ixopfx Af Hjt Final pressure: 0.1 mbar Motor: 5.5 kW Vacuum tank: 500 L

Condition: like new (used), Year of construction: 2024, functionality: fully functional, overall weight: 350 kg, total length: 940 mm, total width: 500 mm, total height: 650 mm, volume flow: 345 m³/h, final pressure: 0.15 bar, power: 5.5 kW (7.48 HP), rotational speed (max.): 3,600 rpm, For sale is a high-performance and highly efficient dry MINK claw vacuum pump from the premium manufacturer Busch, model MV 0312 B. MINK claw vacuum pumps and compressors are the result of the continuous development of claw technology. Decades of experience with this technology in countless applications have led to significant improvements. The MINK claw technology combines performance, reliability, and efficiency thanks to its innovative design. It can be used for both vacuum and compressed air generation. The dry and non-contact operating principle enables virtually maintenance-free operation. MINK vacuum pumps and compressors are ideally suited for industrial applications where constant vacuum or constant overpressure and oil-free operation are required. Data: • Manufacturer: Busch Vacuum Solutions • Model: MV 0312 B • Year of manufacture: 2024 • Condition: Like new, fully functional (last manufacturer maintenance was performed in October 2025) • Location: Graz (Austria) • Technology: Dry claw vacuum pump • Suction capacity (50 Hz): 290 m³/h • Suction capacity (60 Hz): 345 m³/h • Ultimate pressure: 150 mbar (absolute) • Motor rated power: 5.5 kW (at 50 Hz) / 6.5 kW (at 60 Hz) Pictures/Videos: Original pictures and videos will be provided upon request. Kdsdpfx Aeyxvqvsf Hst Condition and scope of delivery: • Condition: fully functional - last manufacturer maintenance was performed in October 2025 • Includes original motor and base feet (vibration-damping). Terms of sale: • Price: €10,900 excl. VAT (negotiable) • Invoice: Price is quoted net plus 20% VAT. A proper invoice will be issued. Interested? Please contact us to arrange a viewing or to receive a quote.

Condition: used, functionality: unexamined, Ferwood Code: RU0002544 - Manufacturer Code: VTLF 2.250/0-79.1 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment services. Please contact us. 235KG 120X80X70 Kdjdpsyrphtofx Af Hjt

Condition: used, functionality: unexamined, Ferwood Code: RU0011677 - Manufacturer Code: VT 3.40 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 38KG - 70X46X34 Kdjdpfx Afoyb R Tvs Hjt

Condition: used, functionality: fully functional, Ferwood Code: RU0009658 - Manufacturer Code: G-BH12BH1610-7HH36-Z - Condition: Used - Functionality: Fully functional - Weight: 65KG - Dimensions: 120X80X60 - If interested we offer overhaul service, please contact us. Kdsdpfx Afeu H Ib Ie Hjt

Condition: excellent (used), Year of construction: 2021, operating hours: 2,10,00,575 h, functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units are easy to set up and install, with the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; Ksdpfx Aewhmm Hjf Hodt • Liquid temperature: up to 80 °C; • Installation: dry, horizontal, on a support plate. Price Euro 2.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2006, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, Colour: Grey Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: D2097712 - Transport dimensions: 1200mm x 800mm x 700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kdodpsywxpxefx Af Hst Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, functionality: fully functional, volume flow: 300 m³/h, final pressure: 0.5 bar, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,720 rpm, We offer this used Gardner Denver VC 300 (01) vacuum pump, year 2007. BOTH PUMPS – SOLD AS A SET Ksdpfxoy Id I Uj Af Hedt Vacuum range: 0.5/10 mbar (abs.) Capacity: 300/360 m³/h Power (S1): 7.5/9 kW Speed: 1450/1720 rpm Serial number: 2711829 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2007, Gardner Denver VLT 40 oil-free vacuum pump, 150 mbar, 1.5 kW Kedpfx Afjufiq Ee Hodt Manufacture: Gardner Denver Type: VLT 40 (01) Year of manufacture: 2007 Total: 1.5 kW Speed: 1420 r/min Weight: 52 kg Air delivery: 42/50 m3/h Max vacuum: 150 mbar IP55

Condition: used, functionality: fully functional, Orion KHA750A dry-run, oil-free vacuum pump Oil-free (dry scroll, i.e. dry scroll) pumps have a low final vacuum and enable high pumping speeds. Pumping capacity 145 l/min Pipe connection: RC 1/4 -- diam. 70mm Operating pressure: 8 - 48 kPa Air temperature: 0-40 °C, humidity: normal level (65 ± 20%). Several pieces in stock Kdjdpfx Aoufh Upof Het

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Ksdpfxoikq Tye Af Hsdt Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: excellent (used), Karl Müller dry-running, oil-free vacuum pump 6.3m3/min Manufacture: Karl W. Müller Type: SD-7-7NA 98724945 RA-8 2.9 kW, 50/60 Hz 230/400 V Capacity: 6.3 m3/min Kedpfx Astiy Ttsf Hedt Pressure: 200 mbar Karl Müller dry-running, oil-free vacuum pump 6.3m3/min /ct1850 Manufacture: Karl W. Müller Type: SD-7-7NA 98724945 RA-8 2.9kW, 50/60Hz 230/400V Capacity: 6.3 m3/min Pressure: 200mbar

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 250 kg, volume flow: 300 m³/h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Vacuum pump, Rietschle SMV 300m3/h, 0.2bar /ct1928/ Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Operating pressure: 200Mbar Motor: 7.5 KW Capacity: 300 m3/h Kdedpst A Ukaefx Af Hjt Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm

Condition: repair required (used), Year of construction: 1997, functionality: fully functional, power: 18 kW (24.47 HP), type of cooling: air, manufacturer: BECKER Type: rotary vane vacuum pump Model: DTLF 500 Year of construction: 1997 Order number: 1475879 NOTE: rotor blades need to be replaced. electric motor Kdsdpsvmhqrsfx Af Het ELEKTRO ADDA Speed: 980 min-1 Rated power: 18.5 kW Input power: 500 m3/h Rated pressure: 800 mbar Rated vacuum: 0 mbar Attachment: FC200LT/6 Manufacturer: ELECTRO ADDA Type: MotoR Motor voltage [V]: 380/690v Current [A]: 38.5 Motor voltage [V]: 380-690 Rated speed [rpm]: 970/1170 Weight: ca350kg

Condition: excellent (used), Year of construction: 2007, volume flow: 42 m³/h, power: 1.5 kW (2.04 HP), Rietschle VLT 40 vacuum pump 42m3/h 150mbar ELMO Rietschle vacuum pump PICO 40m3/h for sale year of construction 2007 Mains voltage: 230/400 V 50 Hz 5.2/3 A IP55 Total: 1,5 kW Kdjdpfxsrhwprs Af Hjt Speed: 1420 rpm Weight: 52 kg Air delivery: 42/50 m3/h

Condition: used, Year of construction: 1998, volume flow: 300 m³/h, Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Operating pressure: 0.2 Bar Motor: 7.5 KW Capacity: 300 m3/h Kjdpfot Uzqksx Af Hjdt Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm

Condition: excellent (used), For sale: BECKER vacuum pump, type 80/4-90. This unit comes from an industrial application and is in good used condition. The pump is equipped with a power cable and a CEE plug. Technical data from the nameplate: Manufacturer: BECKER Type: 80/4-90 Year of manufacture: 2004 Motor: three-phase (3~) Motor number: 6603410 Power at 50 Hz: 0.75 kW Rotational speed: 1420 rpm Current: 4.5 / 2.6 A Voltage: 175–254 V Δ / 300–440 V Y Frequency: 50 Hz cos φ: 0.70 Protection class: IP55 Operating mode: S1 Power at 60 Hz: 0.90 kW Speed at 60 Hz: 1720 rpm CE marking Standard: EN 60034 Ksdpezvzwtofx Af Hjdt According to the service label, the manufacturer recommends an inspection every 5000 operating hours. The pump has normal signs of use. The visual condition and the scope of delivery are clearly shown in the photos.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 1 h, functionality: fully functional, overall weight: 175 kg, total length: 850 mm, total width: 360 mm, total height: 470 mm, volume flow: 400 m³/h, final pressure: -970 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 24 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,450 rpm, warranty duration: 6 months, protection type (IP code): IP54, Liquid ring vacuum pump, monoblock, refurbished, tested. New cover plate, acid-resistant impeller, SIC/VITON mechanical seal and new bearings. Applications include the chemical industry, pharmaceutical production, and wastewater drainage. Spare parts, service, and maintenance are available. Warranty: 6 months after proper commissioning. For performance data, please refer to the attached data sheet. Request a quote for a video of the test! We can assist with delivery and installation. Kdsdpfxeyzbfqj Af Hst

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Kdsdjvvi Nnjpfx Af Hst

Condition: used, Year of construction: 1995, Storage location: Supplier Kjdsvvi Sijpfx Af Hjdt

Condition: used, Year of construction: 2008, There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg. Kdjdpfxoz Da Nhj Af Het

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW Kdedpfxsydv I Dj Af Hot • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: good (used), Year of construction: 1996, Vaccum pump BUSCH RA 0021, made in Switzerland, 220V, 0,75 Kw, 1,3 mbar. Ksdpjdtkkfjfx Af Hedt