Used Window Aluminium for sale (11,970)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, power: 9 kW (12.24 HP), Window Patching Machine XLTC - 1020 Year: 2016 Max size: 1020 x 650 mm Min seize: 140 x 140 mm Film thickness: 0.05 - 0.2 mm Max film size: 410 x 380 mm Min film size: 60 x 80 mm Card: 200 - 500g/mp Flute paper: < 3mm Power: 9Kw In production Hodpfx Afswna Nuj Njfb Available immediately

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 500 h, Sublimation machine for wood effect on aluminium profiles. the machine has 11 places for profiles and is totally functionable and ready for use. Hfedpfou Td Izex Af Neb

Condition: excellent (used), functionality: fully functional, OMS double mitre saw for wood and aluminium Specification: • Condition – used, after inspection • Manufacturer – OMS • Main motors – 2 x 2.5 HP • Pneumatic head control • Max cutting length – 351 cm • Min cutting length – 34 cm • Max cutting cross-section – 110x150 mm (at right angle) • Max blade diameter – 300 mm • Extraction ports, diameter 60 mm • Mitre cutting from -45 to +45 degrees (right, left) Hfedpfjw Htxtex Af Neb • Vertical workpiece clamps • Weight – approx. 800 kg • Overall dimensions – 412 x 85 x 130 cm (L x W x H) Additional information: • Very good original technical condition • The attached photos show the actual condition of the machine • Possibility to connect and inspect the device on site

Year of construction: 2008, condition: used, functionality: fully functional, 3 x 142 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of manufacture: 2008 Volume: approx. 142,000 liters Type of vessel: Silo Condition: used Suitable for foodstuff: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.63 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Construction Inner shell material: Aluminium Remarks: Material grade: AlMg3 / AlMgSi3 Support type: support ring/ base frame Top bottom type: conical head Slope: approx. 15 % Bottom type: cone Cone angle: 60 degrees Top section: 1 x roof edge railing, height: 1,200 mm 1 x walkway with handrail 2 x crane lugs 1 x manhole DN 600 with vent 1 x connection flange for level measurement 1 x welded socket for high level sensor 1 x flange DN 100 (filling) Hfsdpfxexqr E Rs Af Nob Shell/body: 1 x personnel door (approx. 1,800 x 850 mm) 1 x cable protection tube 1 x filling line DN 100 with TW connection Bottom section: The silos terminate below in a 60° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg Hjdpfxsbnnyie Af Nsfb in mobile version

Condition: excellent (used), Year of construction: 1986, Window patch machine Heiber & Schroeder Hjdpjwb Dqpefx Af Njfb Year 1986 Model WP1

Condition: new, functionality: fully functional, ALUMINIUM TUBES GRADE AW-5754-0 Hsdpfswtpr Aex Af Nofb EXAMPLE DIMENSIONS: Length Diameter Diameter tolerance Wall thickness 4500 512 ±1.5 6 1450 512 ±1.5 6 5000 512 ±1.6 6

Condition: new, saw blade diameter 600 x 30 mm capacity 90 degrees: round 215 mm capacity 90 degrees: square 195 x 195 mm capacity 90 degrees: flat 140 x 395 mm capacity 45 degrees: round 170 mm capacity 45 degrees: square 170 x 170 mm capacity 45 degrees: flat 100 x 175 mm turning speeds 2800 U/min total power requirement 3.0 kW weight of the machine ca. 310 kg range L-W-H 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (underfloor) Hfjdsxaccfepfx Af Nob * For cuts from 0° to 180° right and left * In aluminum and light metal alloys * With rising saw blade * With extremely large cutting range (saw blade diameter 600 mm) * Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation and maximum precision - Large bearing-mounted turntable with internal indexing at 0/45° * Ensures quick adjustment for miter cuts - Extractor nozzle for connecting a chip extraction system - Pneumatic spray system for cooling and lubricating the saw blade - Machine base frame - Powerful saw drive with 3-phase 3HP motor Included in delivery: - 1x carbide saw blade ø 600 mm - Blow-out gun - Full protective cover - Tool set - Detailed operating instructions, maintenance manual, etc.

Year of construction: 1993, condition: excellent (used), Extraction system for aluminium and PVC swarf Dimension: 800x1000x2370 Hodpfx Afod Rx H Eo Nsfb

Condition: used, Aluminum silo with long support skirt Technical specifications / Dimensions Available units: 1 Volume: approx. 105,000 liters Type of vessel: Silo Condition: Used Food-grade: No Design: Upright Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: Non-pressurized Material / Construction Inner shell material: Aluminum Equipment Hsdpfx Afstxitcj Nofb Support design: Base ring/support skirt Mounting: Fixed Top head type: Conical roof Slope: approx. 15 degrees Bottom head type: Cone Cone angle: 60 degrees Top section: 2 x crane lugs 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (SiloPilot) 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Shell: 2 x flange DN 32 (min-max indicator) 1 x filling line, leading into the top of the silo and ending at the TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection conduit Remarks: - The silo ends at the bottom in a 60° cone with flange and extraction box. - The silo has cosmetic defects (brown discoloration, various drilled holes for cable ducts in the support skirt), which do not affect the functionality of the silo. The currently connected measurement and control equipment is included. However, no warranty is given for its functionality!

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Moulding heads VIVALDI EU68mm. Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Hfjdpjhw Dfyofx Af Nob Available immediately.

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Hodpsh Nycaefx Af Nsfb

Year of construction: 1998, condition: excellent (used), functionality: fully functional, We sell a complete finishing line. The line consists of: 1. intermediate grinding machine (Tecnolegno, year of construction 1998) 2. Painting chamber (GreenSprayer, 4X Wagner GA250Al sprayer, Cooling with Mitsubishi air conditioner, 2X High pressure paint pump Böllhoff 000.185-DO) 3. Drying chamber (with central heating system) Wood-aluminum window sashes were processed with this line. The line used water-based paints. Device is in good condition. Hjdpfx Afsu Hgavj Nofb The price of the device is to be offered by the buyer. Buyer is responsible for transportation and dismantling. If you have any further questions, please contact us about the production equipmen

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height Hjdpfx Afsxabzts Nsfb - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, device for dosing pastes, jams, meat, cheese, etc. into aluminum and plastic cups, including an aluminum lid sealing machine and a date coder Hjdpfx Afew Dqmvo Nofb

Condition: used, 3 x 93 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 3 Volume: approx. 92,000 litres Container type: Silo Condition: used Food grade: no Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 9,000 mm Total height: approx. 11,600 mm Weight: approx. 2,050 kg Specific weight of stored medium: 0.6 t/m³ Operating pressure: unpressurised Ground clearance: approx. 770 mm Material / Specifications Inner shell material: Aluminium Notes: Material: AlMg3 / AlMgSi3 Support type: support ring/base frame Top head type: conical top Top slope: approx. 15% Bottom design: cone Cone angle: 90 degrees Top equipment: 1 x roof perimeter guard rail, height: 1,200 mm 1 x transition catwalk with railing 2 x lifting lugs 1 x filter flange DN 800 with blanking cover and mounted vent nozzle 1 x connection flange for level measurement 1 x welded nozzle for full level sensor Hfodpfoxqr Dtex Af Nob Shell: 1 x operator access door (approx. 1,800 x 850 mm) 1 x cable protection conduit (ø 60 x 3 mm) 1 x fill line DN 80 ending in TW connection 1 x welded nozzle for empty level sensor Bottom: The silos discharge at the bottom into a 90° cone with flange DN 200 and emergency shut-off slide valve. Optionally available: two-piece access ladder with rear safety cage.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, we are selling complete wood-aluminum window sash line. Sash production line consists of: 1. wood package lifter with roller track (4X1250kg) 2. 9 edge planer Leadermac lmc 923 Hypermac (year of construction 2012, maximum width 230mm) 3. Pedolin processing center( year of construction 2003, Cuts optimized details according to the program, mills and installs locking points, mills mullion joint, drills mounting holes.) Hedpfx Afju Hgi Dj Nefb 4. Primer paint chamber( 4X wagner GA250Al spray guns, Wagner Cobra high pressure pump) 5. Drying chamber

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm Hfjdpexabw Uofx Af Nsb - in checked condition - machine video - ?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW Hedpfxjxabqze Af Nefb weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm Hsdpfx Aoxabg Ajf Nsfb turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP CNC total power requirement 2.6 / 3.5 kW weight of the machine ca. 605 kg range L-W-H 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Hfodpfxjxaa Uxs Af Neb Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 0 x 30 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 190x100 / 230x50 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 130 x mm turning speeds 2800 U/min mitre joint cuts -/+ degrees total power requirement 2.2 kW weight of the machine ca. 2 kg range L-W-H 1600 x 750 x 1000 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from ° right to ° left * In aluminum and light metal alloys * With rising saw blade - Manually opening safety guard (optionally with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) - Heavy-duty cast iron construction ensures vibration-free . operation and maximum precision - Large bearing-mounted rotary table with internal indexing at 0/° * Ensures quick adjustment for miter cuts Hjdpfx Afsxaa Hue Nsfb - Extraction nozzle for connecting a chip extraction system Scope of delivery: - 2 pneumatic vertical vices with quick adjustment - Tool set - Detailed operating instructions, maintenance manual, etc. - Blow-out gun - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit Hfsdpfxoxaa Hns Af Njb - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide Hjdpfx Aoxaaxdjf Nofb hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm links capacity 45 degrees: round 110 mm rechts capacity 45 degrees: square 100 mm links capacity 45 degrees: square 95 mm rechts capacity 45 degrees: flat 135 x 60 mm dimensions of saw-blade 350 x 32 turning speeds 1700 / 3400 U/min capacity 45 degrees: round 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 210 kg dimensions of the machine ca. 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Hjdpfxsxaai Ns Af Nofb Special accessories: - including base