MURATEC - MD120 - 2007

MURATEC

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 17KX216770001, Technical Specifications: Work Area Ksdpfx Afexxi Nceaodh - Maximum turning diameter: 230 mm (120 mm with loader) - Maximum machining diameter: 200 mm - Maximum workpiece length: 145 mm (75 mm with loader) - X1/X2-axis travel: 130 mm / Rapid traverse in X: 24 m/min - Z1/Z2-axis travel: 145 mm / Rapid traverse in Z: 24 m/min - Y1/Y2-axis travel: ±40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis travel: X - Left 200 mm / Right 1600 mm; Y - 550 mm; Z - 155 mm; α 180˚ - Maximum feed rates (m/min): X - 160; Y - 120; Z - 35; α 180˚/1 sec - Load/unload gripper specs (pneumatic): Outer diameter Ø90 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle - Spindle size: Standard (6" / 8") / 165 mm / 205 mm - Maximum speed: Left & right 45–4500 rpm - Motor power (100% duty cycle): Left 15 kW / Right 7.5 kW Turret with Driven Tools - Tool interface: BMT55 - Number of stations: 12 (right), 12 (left) – turret with driven positions - Maximum speed: 4000 rpm; milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 200V, 3-phase, fuse 151 A - Total connected load: 31 kVA Dimensions - Machine dimensions (L×W×H): 3950 × 2715 × 2800 mm - Weight: 4,400 kg Main Features and Capabilities - Horizontal design for optimized chip evacuation; gantry loading/unloading from conveyors - Automation: Gantry robot with two loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip conveyor - Coolant filtration: Up to 40 bar, micron filter (Evotech 500PRO) - Coolant chiller: Texa TCW55PMSBCDX00, SN165373 - Process control: Marposs T25 - Broken tool detection: Peek tool menu (Murata/Fanuc option enabled) - Documentation: Electronic/manual available Machine status: IN OPERATION

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15KX239200001, Technical specifications: Work Area - Maximum turning diameter: 210 mm - Maximum machining diameter: 200 mm - Maximum workpiece length: 220 mm - X1/X2 axis travel: 220 mm / Rapid traverse in X: 24 m/min - Z1/Z2 axis travel: 220/770 mm / Rapid traverse in Z: 36 m/min - Y1/Y2 axis travel: +/-40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis strokes: X - 210 mm; Y - 680 mm; Z - Left 2080 mm / Right 3360 mm; α 270˚ - Maximum speeds (m/min): X - 35; Y - 120; Z - 160; α 270˚/1.5 sec - Load/unload gripper specifications (pneumatically powered): Outer diameter up to Ø170 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle: - Spindle nose: A8 - Maximum speed: Left 5000 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: left spindle - 65 mm / right spindle - not available Tool Turret with Driven Tools: - Tool interface: BMT55 - Number of positions: 15 upper / 12 lower station turret, all driven positions - Maximum speed: 4500 rpm; Milling motor power: 4.5 kW Electrical Equipment: - Operating voltage: 200V, 3-phase, 151A fuse - Connected load: 55 kVA Kodpfxoxwuhuj Afaodh Dimensions: - Machine dimensions (L×W×H): 3200 × 2200 × 3500 mm - Weight: 10,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip removal, gantry loading/unloading from conveyors - Automation includes: Gantry robot + 2 loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip removal conveyor - Coolant filtration 40 bar max: Filber S.L. FTH5/10, 200 l/min - In-process control: Marposs T25 - Broken tool detection system: Peek tool menu Murata/Fanuc feature enabled - Part detection through spindle: Low pressure compressed air sensors - Bar feeder interface max Ø65 mm - Documentation: Electronic and hard copy available Machine condition: OPERATIONAL

Condition: excellent (used), operating hours: 8,500 h, functionality: fully functional, * Muratec MT 25 MC. * Extremely well-equipped, estimated equipment value: 30,000–35,000 euros. * 7 controlled axes. * Twin spindles. * Two turrets. * Each turret with 15 positions, all fully driven. * Driven tools, C axis. * Integrated spindle motor, 15 kW. * Spindle start-up torque: 420 Nm. * Driven tool motor: 4 kW. * Spindle nose size: A2-6. * Maximum machining diameter: 370 mm. * Maximum machining length: 920 mm. Kodpfoyh Ay Eox Afasdh * Bar capacity: 65 mm. * Box guideways on all axes. * Two hydraulic chucks, 250 mm each, metric system. * Automatic parts catcher for finished workpieces. * Automatic cleaning of secondary spindle with air or coolant. * Conveyor belt for finished parts. * Interface for bar feeder. * 1.5 m Multifeed bar loader included. * Automatic load monitoring and tool consumption monitor. * Automatic part transfer system between spindles with torque control. * Fanuc CNC. * Fanuc motors and servos. * Rapid traverse speeds: 20 and 25 m/min. * Main spindle speed: 3,500 rpm. * Driven tool speed: 3,000 rpm. * Turret indexing time: 0.2 seconds. * Rear hinged belt chip conveyor. * Machine currently in operation. * Weight: 10,800 kg. * Immediate delivery unless sold prior.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,900 h, MURATEC MD 200G Year of manufacture: 12 / 2004 Control unit: Fanuc 18 it Integrated gantry loading system with travels of 2100 mm + 2250 mm Z-axis gantry stroke increased by 100 mm (“Z” axis shift) Gantry with increased payload capacity (12+12 kg) Muratec WFL 20-280 workpiece feeding system No. 2 Autoblock BH 250 self-centering chucks No. 2 servo-controlled turrets with 10 positions for driven tools Static toolholder kit No. 2 radial driven toolholders No. 2 axial driven toolholders “C” axes for both spindles, continuously adjustable to 360,000 positions Kodpfsw E D Tlsx Afaodh Coolant + air outlet above left and right spindles “PEL” device on right spindle Belt-type chip conveyor with rear discharge Rigid tapping software TOOL MONITOR software TOOL LIFE MANAGEMENT software CE mark

Condition: ready for operation (used), Year of construction: 2011, CNC lathe with dual spindle MW Series MURATEC MW120, used, operational and ready for use. Year 2011. Kedpfxoygxbre Afasdh Technical specifications: Chuck size: STD: 165 mm - OTP: 210 mm. Tooling: Turret x 2 Number of tools: 8 x 2 Spindle nose: JIS A2-5 Max spindle speed: 6,000 rpm Spindle AC motor: STD: 7.5 kW/30 min x 2 - OP: 11 kW/30 min x 2 Number of gantry loaders: 1 Gross weight with loader: 4,500 kg.

Condition: ready for operation (used), Year of construction: 2013, Double-spindle CNC lathe MW Series MURATEC MW120, used, functional and ready for operation. Technical specifications: Chuck size: STD: 165 mm - OTP: 210 mm Tooling: Turret x 2 Number of tools: 8 x 2 Spindle nose: JIS A2-5 Max spindle speed: 6,000 min⁻¹ Spindle AC motor: STD: 7.5 kW/30 min x 2 - OP: 11 kW/30 min x 2 Number of gantry loaders: 1 Kjdoygxa Uepfx Afajdh Gross weight with loader: 4,500 kg.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 driven tool holder 2x C-axis 3x Y axis Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar loader interface Kdjdpfevxu Eaox Afaoh Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 Kodpfxoydfuao Afaedh MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 135 [mm] MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 135 [mm] TURRET 1 - Number of positions : 8 - X/Z stroke : 130 / 145 [mm] TURRET 2 - Number of positions : 8 - X/Z stroke : 130 / 145 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 32 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.875 [mm] - Machine height : 2.420 [mm] - Machine weight : 4.600 [kg] MACHINE HOURS - Number of hours under power : 10842 [h] EQUIPMENT - CNC : Fanuc - 3 colors status lamp - Coolant tank - Chips conveyor : ARRIERE - Parts catcher - Workpiece loading robot * Max. chuck diameter : 165 [mm]

Condition: used, Year of construction: 2022, functionality: fully functional, 4 units available for this model Kjdoya D Iqjpfx Afaedh

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 4000 mm + 2000 mm bar loader Measurements depth 2300 mm Measurements height 2100 mm Machine weight 10400 kg Control Unit Brand FANUC Model 18i Kjdpfsx D N I Ajx Afajdh Main Drive Number of spindles 2 Spindle speed range 40 - 4000 Spindle motor power 15 kW Number of axis 7 Movement X-Axis Movement 180 mm Z-Axis Movement 930 mm Turret Number of turrets 2 Number of tool slots 15 Additional Equipment Bar loader multifeed, maximum bar length 1.5 meters. This Muratec MT 25 MC Lathe was manufactured in the year 2001 in Japan. It is equipped with a Fanuc 18i CNC control unit and has 7 axis. The machine has a spindle speed of 40-4000 rpm. Application Types Turning